Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>

It was a half conversion.  Finish it.
enabled can only get values of 0, 1 or 2, was declared as an int but
sent as an unint8_t, change its type.
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>

When we catch the special case of an input NaN in ARM float to int
helper functions, set the Invalid flag as well as returning the
correct result.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Newer kernels are large enough that they can overlap the address
where qemu places the initrd. Move the initrd up so that there is
enough space for the kernel again.

Unfortunately it's not possible to automatically determine the
size of the kernel if it is compressed, so this is the best we
can do.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add very basic implementation of collie PDA emulation. The system lacks
LoCoMo and graphics/sound emulation. Linux kernel boots up to mounting
rootfs (theoretically it can be provided in pflash images).
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Basic implementation of DEC/Intel SA-1100/SA-1110 chips emulation.
Implemented:
 - IRQs
 - GPIO
 - PPC
 - RTC
 - UARTs (no IrDA/etc.)
 - OST reused from pxa25x

Everything else is TODO (esp. PM/idle/sleep!) - see the todo in the
hw/strongarm.c
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The previous patch removed the need for parameter puc.
Is is now unused, so remove it.

Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>

Function gen_pc_load was introduced in commit
d2856f1a.
The only reason for parameter searched_pc was
a debug statement in target-i386/translate.c.

Parameter puc was needed by target-sparc until
commit d7da2a10.

Remove searched_pc from the debug statement and remove both
parameters from the parameter list of gen_pc_load.

As the function name gen_pc_load was also misleading,
it is now called restore_state_to_opc. This new name
was suggested by Peter Maydell, thanks.

v2: Remove last parameter, too, and rename the function.

v3: Fix [] typo in target-arm/translate.c.
    Fix wrong SHA1 object name in commit message (copy+paste error).

Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>

For emulation (and migration) we need to know about the guest's storage keys.
These are separate from actual RAM contents, so we need to allocate them in
parallel to RAM.

While touching the file, this patch also adjusts the hypercall function
to a new syntax that aligns better with tcg emulated code.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The KVM interrupt injection path is non-generic for now. So we need to push
knowledge of how to inject a device interrupt using KVM into the actual device
code.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This patch adds some code paths for running s390x guest OSs without the
need for KVM.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

We need to add some more logic to the CPU description to leverage emulation
of an s390x CPU. This patch adds all the required helpers, fields in CPUState
and constant definitions required for user and system emulation.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This provides a consistent naming scheme across all targets.
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAlon Levy <alevy@redhat.com>
Tested-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

MIPS FPU instructions should start with a clean softfpu status. This
is done for the most instructions, but not for comparison ones.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Contrary to cabs.ps.* instructions, c.ps.* should not compare the absolute
value of the operand, but directly the operands.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

As the softfloat comparison functions already test for NaN, there is no
need to always call the float*_unordered*() functions.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

efstst*() functions are fast SPE funtions which do not take into account
special values (infinites, NaN, etc.), while efscmp*() functions are
IEEE754 compliant.

Given that float32_*() functions are IEEE754 compliant, the efscmp*()
functions are correctly implemented, while efstst*() are not. This
patch reverse the implementation of this two groups of functions and
fix the comments. It also use float32_eq() instead of float32_eq_quiet()
as qNaNs should not be ignored.

Cc: Alexander Graf <agraf@suse.de>
Cc: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Make clear for all comparison functions which ones trigger an exception
for all NaNs, and which one only for sNaNs.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

I am not a big fan of code moving, but having the signaling version in
the middle of quiet versions and vice versa doesn't make the code easy
to read.

This patch is a simple code move, basically swapping locations of
float*_eq and float*_eq_quiet.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

float*_eq_signaling functions have a different semantics than other
comparison functions. Fix that by renaming float*_quiet_signaling() into
float*_eq().

Note that it is purely mechanical, and the behaviour should be unchanged.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

float*_eq functions have a different semantics than other comparison
functions. Fix that by first renaming float*_quiet() into float*_eq_quiet().

Note that it is purely mechanical, and the behaviour should be unchanged.
That said it clearly highlight problems due to this different semantics,
they are fixed later in this patch series.

Cc: Alexander Graf <agraf@suse.de>
Acked-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

SSE instructions CMPUNORDPS/D and CMPORDPS/D do not trigger an invalid
exception if operands are qNANs.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Use the new float*_unordered*() functions from softfloat instead of
redefining a private version.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Use float64_unordered_quiet() in helper_cmptun() instead of doing the
the comparison manually.

According to the "Alpha Compiler Writer's Guide", we should use the
_quiet version here, as CMPTUN and CMPTEQ should generate InvalidOp
for SNaNs but not for QNaNs.

Thanks to Peter Maydell <peter.maydell@linaro.org> and Richard
Henderson <rth@twiddle.net> for digging into the manuals.
Acked-by: NRichard Henderson  <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add float*_unordered_quiet() functions to march the softfloat versions.
As FPU status is not tracked with softfloat-native, they don't differ
from the signaling version.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add float*_unordered() functions to softfloat, matching the softfloat-native
ones. Also add float*_unordered_quiet() functions to match the others
comparison functions.

This allow target-i386/ops_sse.h to be compiled with softfloat.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add floatx_{add,mul,sub} defines, and use them instead of using direct
C operations.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Use float unions from cpu-all.h instead of redefining new (wrong for arm)
ones in target-i386. This also allows building cpu-exec.o with softfloat.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>