Skip to content

Q
qemu

openeuler / qemu

通知 10
Star 0
Fork 0
Q
qemu
切换分支/标签
  1. 17 7月, 2018 1 次提交
    • T
      qom/object: Add a new function object_initialize_child() · 0210b39d
      由 Thomas Huth 提交于 
      A lot of code is using the object_initialize() function followed by a call
to object_property_add_child() to add the newly initialized object as a child
of the current object. Both functions increase the reference counter of the
new object, but many spots that call these two functions then forget to drop
one of the superfluous references. So the newly created object is often not
cleaned up correctly when the parent is destroyed. In the worst case, this
can cause crashes, e.g. because device objects are not correctly removed from
their parent_bus.

Since this is a common pattern between many code spots, let's introduce a
new function that takes care of calling all three required initialization
functions, first object_initialize(), then object_property_add_child() and
finally object_unref(). And since the function does a similar job like
object_new_with_props(), also allow to set additional properties via
varargs, and use user_creatable_complete() to make sure that the functions
can be used similarly.

And while we're at object.h, also fix some copy-n-paste errors in the
comments there ("to store the area" --> "to store the error").
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Message-id: 1531745974-17187-2-git-send-email-thuth@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
      0210b39d
  3. 13 6月, 2018 1 次提交
  5. 12 6月, 2018 1 次提交
    • M
      object: fix OBJ_PROP_LINK_UNREF_ON_RELEASE ambivalence · 265b578c
      由 Marc-André Lureau 提交于 
      A link property can be set during creation, with
object_property_add_link() and later with object_property_set_link().

add_link() doesn't add a reference to the target object, while
set_link() does.

Furthemore, OBJ_PROP_LINK_UNREF_ON_RELEASE flags, set during add_link,
says whether a reference must be released when the property is destroyed.
This can lead to leaks if the property was later set_link(), as the
added reference is never released.

Instead, rename OBJ_PROP_LINK_UNREF_ON_RELEASE to OBJ_PROP_LINK_STRONG
and use that has an indication on how the link handle reference
management in set_link().
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180531195119.22021-3-marcandre.lureau@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
      265b578c
  7. 01 6月, 2018 1 次提交
  9. 09 5月, 2018 1 次提交
  11. 04 5月, 2018 1 次提交
  13. 20 3月, 2018 2 次提交
  15. 12 3月, 2018 1 次提交
  17. 06 3月, 2018 1 次提交
    • A
      qmp: Add qom-list-properties to list QOM object properties · 961c47bb
      由 Alexey Kardashevskiy 提交于 
      There is already 'device-list-properties' which does most of the job,
however it does not handle everything returned by qom-list-types such
as machines as they inherit directly from TYPE_OBJECT and not TYPE_DEVICE.
It does not handle abstract classes either.

This adds a new qom-list-properties command which prints properties
of a specific class and its instance. It is pretty much a simplified copy
of the device-list-properties handler.

Since it creates an object instance, device properties should appear
in the output as they are copied to QOM properties at the instance_init
hook.

This adds a object_class_property_iter_init() helper to allow class
properties enumeration uses it in the new QMP command to allow properties
listing for abstract classes.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20180301130939.15875-3-aik@ozlabs.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      961c47bb
  19. 03 3月, 2018 2 次提交
  21. 09 2月, 2018 2 次提交
  23. 17 10月, 2017 1 次提交
  25. 04 10月, 2017 1 次提交
  27. 04 9月, 2017 1 次提交
  29. 18 7月, 2017 1 次提交
    • E
      qom: Fix ambiguous path detection when ambiguous=NULL · ebcc479e
      由 Eduardo Habkost 提交于 
      object_resolve_path*() ambiguous path detection breaks when
ambiguous==NULL and the object tree have 3 objects of the same type and
only 2 of them are under the same parent.  e.g.:

 /container/obj1 (TYPE_FOO)
 /container/obj2 (TYPE_FOO)
 /obj2 (TYPE_FOO)

With the above tree, object_resolve_path_type("", TYPE_FOO, NULL) will
incorrectly return /obj2, because the search inside "/container" will
return NULL, and the match at "/obj2" won't be detected as ambiguous.

Fix that by always calling object_resolve_partial_path() with a non-NULL
ambiguous parameter.

Test case included.
Reported-by: NIgor Mammedov <imammedo@redhat.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170707213052.13087-3-ehabkost@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
      ebcc479e
  31. 14 7月, 2017 1 次提交
  33. 20 6月, 2017 2 次提交
  35. 19 6月, 2017 1 次提交
  37. 25 1月, 2017 1 次提交
  39. 17 1月, 2017 1 次提交
  41. 04 10月, 2016 1 次提交
  43. 06 7月, 2016 4 次提交
    • E
      qapi: Add new visit_complete() function · 3b098d56
      由 Eric Blake 提交于 
      Making each output visitor provide its own output collection
function was the only remaining reason for exposing visitor
sub-types to the rest of the code base.  Add a polymorphic
visit_complete() function which is a no-op for input visitors,
and which populates an opaque pointer for output visitors.  For
maximum type-safety, also add a parameter to the output visitor
constructors with a type-correct version of the output pointer,
and assert that the two uses match.

This approach was considered superior to either passing the
output parameter only during construction (action at a distance
during visit_free() feels awkward) or only during visit_complete()
(defeating type safety makes it easier to use incorrectly).

Most callers were function-local, and therefore a mechanical
conversion; the testsuite was a bit trickier, but the previous
cleanup patch minimized the churn here.

The visit_complete() function may be called at most once; doing
so lets us use transfer semantics rather than duplication or
ref-count semantics to get the just-built output back to the
caller, even though it means our behavior is not idempotent.

Generated code is simplified as follows for events:

|@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP
|     QDict *qmp;
|     Error *err = NULL;
|     QMPEventFuncEmit emit;
|-    QmpOutputVisitor *qov;
|+    QObject *obj;
|     Visitor *v;
|     q_obj_ACPI_DEVICE_OST_arg param = {
|         info
|@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP
|
|     qmp = qmp_event_build_dict("ACPI_DEVICE_OST");
|
|-    qov = qmp_output_visitor_new();
|-    v = qmp_output_get_visitor(qov);
|+    v = qmp_output_visitor_new(&obj);
|
|     visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err);
|     if (err) {
|@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP
|         goto out;
|     }
|
|-    qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov));
|+    visit_complete(v, &obj);
|+    qdict_put_obj(qmp, "data", obj);
|     emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err);

and for commands:

| {
|     Error *err = NULL;
|-    QmpOutputVisitor *qov = qmp_output_visitor_new();
|     Visitor *v;
|
|-    v = qmp_output_get_visitor(qov);
|+    v = qmp_output_visitor_new(ret_out);
|     visit_type_AddfdInfo(v, "unused", &ret_in, &err);
|-    if (err) {
|-        goto out;
|+    if (!err) {
|+        visit_complete(v, ret_out);
|     }
|-    *ret_out = qmp_output_get_qobject(qov);
|-
|-out:
|     error_propagate(errp, err);
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      3b098d56
    • E
      string-output-visitor: Favor new visit_free() function · e7ca5656
      由 Eric Blake 提交于 
      Now that we have a polymorphic visit_free(), we no longer need
string_output_visitor_cleanup(); however, we still need to
expose the subtype for string_output_get_string().
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-9-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      e7ca5656
    • E
      string-input-visitor: Favor new visit_free() function · 7a0525c7
      由 Eric Blake 提交于 
      Now that we have a polymorphic visit_free(), we no longer need
string_input_visitor_cleanup(); which in turn means we no longer
need to return a subtype from string_input_visitor_new() nor a
public upcast function.
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-7-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      7a0525c7
    • E
      qapi: Add parameter to visit_end_* · 1158bb2a
      由 Eric Blake 提交于 
      Rather than making the dealloc visitor track of stack of pointers
remembered during visit_start_* in order to free them during
visit_end_*, it's a lot easier to just make all callers pass the
same pointer to visit_end_*.  The generated code has access to the
same pointer, while all other users are doing virtual walks and
can pass NULL.  The dealloc visitor is then greatly simplified.

All three visit_end_*() functions intentionally take a void**,
even though the visit_start_*() functions differ between void**,
GenericList**, and GenericAlternate**.  This is done for several
reasons: when doing a virtual walk, passing NULL doesn't care
what the type is, but when doing a generated walk, we already
have to cast the caller's specific FOO* to call visit_start,
while using void** lets us use visit_end without a cast. Also,
an upcoming patch will add a clone visitor that wants to use
the same implementation for all three visit_end callbacks,
which is made easier if all three share the same signature.

For visitors with already track per-object state (the QMP visitors
via a stack, and the string visitors which do not allow nesting),
add an assertion that the caller is indeed passing the same
pointer to paired calls.
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-4-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      1158bb2a
  45. 20 6月, 2016 1 次提交
  47. 17 6月, 2016 1 次提交
  49. 12 5月, 2016 1 次提交
    • E
      qapi: Split visit_end_struct() into pieces · 15c2f669
      由 Eric Blake 提交于 
      As mentioned in previous patches, we want to call visit_end_struct()
functions unconditionally, so that visitors can release resources
tied up since the matching visit_start_struct() without also having
to worry about error priority if more than one error occurs.

Even though error_propagate() can be safely used to ignore a second
error during cleanup caused by a first error, it is simpler if the
cleanup cannot set an error.  So, split out the error checking
portion (basically, input visitors checking for unvisited keys) into
a new function visit_check_struct(), which can be safely skipped if
any earlier errors are encountered, and leave the cleanup portion
(which never fails, but must be called unconditionally if
visit_start_struct() succeeded) in visit_end_struct().

Generated code in qapi-visit.c has diffs resembling:

|@@ -59,10 +59,12 @@ void visit_type_ACPIOSTInfo(Visitor *v,
|         goto out_obj;
|     }
|     visit_type_ACPIOSTInfo_members(v, obj, &err);
|-    error_propagate(errp, err);
|-    err = NULL;
|+    if (err) {
|+        goto out_obj;
|+    }
|+    visit_check_struct(v, &err);
| out_obj:
|-    visit_end_struct(v, &err);
|+    visit_end_struct(v);
| out:

and in qapi-event.c:

@@ -47,7 +47,10 @@ void qapi_event_send_acpi_device_ost(ACP
|         goto out;
|     }
|     visit_type_q_obj_ACPI_DEVICE_OST_arg_members(v, &param, &err);
|-    visit_end_struct(v, err ? NULL : &err);
|+    if (!err) {
|+        visit_check_struct(v, &err);
|+    }
|+    visit_end_struct(v);
|     if (err) {
|         goto out;
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-20-git-send-email-eblake@redhat.com>
[Conflict with a doc fixup resolved]
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      15c2f669
  51. 23 3月, 2016 2 次提交
    • V
      util: move declarations out of qemu-common.h · f348b6d1
      由 Veronia Bahaa 提交于 
      Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: NVeronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      f348b6d1
    • M
      include/qemu/osdep.h: Don't include qapi/error.h · da34e65c
      由 Markus Armbruster 提交于 
      Commit 57cb38b3 included qapi/error.h into qemu/osdep.h to get the
Error typedef.  Since then, we've moved to include qemu/osdep.h
everywhere.  Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h.  That's in excess of
100KiB of crap most .c files don't actually need.

Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h.  Include qapi/error.h in .c files that need it and don't
get it now.  Include qapi-types.h in qom/object.h for uint16List.

Update scripts/clean-includes accordingly.  Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h.  Update the list of includes in the qemu/osdep.h
comment quoted above similarly.

This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third.  Unfortunately, the number depending on
qapi-types.h shrinks only a little.  More work is needed for that one.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      da34e65c
  53. 09 2月, 2016 4 次提交
    • E
      qapi: Drop unused 'kind' for struct/enum visit · 337283df
      由 Eric Blake 提交于 
      visit_start_struct() and visit_type_enum() had a 'kind' argument
that was usually set to either the stringized version of the
corresponding qapi type name, or to NULL (although some clients
didn't even get that right).  But nothing ever used the argument.
It's even hard to argue that it would be useful in a debugger,
as a stack backtrace also tells which type is being visited.

Therefore, drop the 'kind' argument as dead.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-22-git-send-email-eblake@redhat.com>
[Harmless rebase mistake cleaned up]
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      337283df
    • E
      qom: Swap 'name' next to visitor in ObjectPropertyAccessor · d7bce999
      由 Eric Blake 提交于 
      Similar to the previous patch, it's nice to have all functions
in the tree that involve a visitor and a name for conversion to
or from QAPI to consistently stick the 'name' parameter next
to the Visitor parameter.

Done by manually changing include/qom/object.h and qom/object.c,
then running this Coccinelle script and touching up the fallout
(Coccinelle insisted on adding some trailing whitespace).

    @ rule1 @
    identifier fn;
    typedef Object, Visitor, Error;
    identifier obj, v, opaque, name, errp;
    @@
     void fn
    - (Object *obj, Visitor *v, void *opaque, const char *name,
    + (Object *obj, Visitor *v, const char *name, void *opaque,
       Error **errp) { ... }

    @@
    identifier rule1.fn;
    expression obj, v, opaque, name, errp;
    @@
     fn(obj, v,
    -   opaque, name,
    +   name, opaque,
        errp)
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      d7bce999
    • E
      qapi: Swap visit_* arguments for consistent 'name' placement · 51e72bc1
      由 Eric Blake 提交于 
      JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp).  This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order.  It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.

Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.

Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.

Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
 $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings').  The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.

    // Part 1: Swap declaration order
    @@
    type TV, TErr, TObj, T1, T2;
    identifier OBJ, ARG1, ARG2;
    @@
     void visit_start_struct
    -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
    +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
     { ... }

    @@
    type bool, TV, T1;
    identifier ARG1;
    @@
     bool visit_optional
    -(TV v, T1 ARG1, const char *name)
    +(TV v, const char *name, T1 ARG1)
     { ... }

    @@
    type TV, TErr, TObj, T1;
    identifier OBJ, ARG1;
    @@
     void visit_get_next_type
    -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
    +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
     { ... }

    @@
    type TV, TErr, TObj, T1, T2;
    identifier OBJ, ARG1, ARG2;
    @@
     void visit_type_enum
    -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
    +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
     { ... }

    @@
    type TV, TErr, TObj;
    identifier OBJ;
    identifier VISIT_TYPE =~ "^visit_type_";
    @@
     void VISIT_TYPE
    -(TV v, TObj OBJ, const char *name, TErr errp)
    +(TV v, const char *name, TObj OBJ, TErr errp)
     { ... }

    // Part 2: swap caller order
    @@
    expression V, NAME, OBJ, ARG1, ARG2, ERR;
    identifier VISIT_TYPE =~ "^visit_type_";
    @@
    (
    -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
    +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
    |
    -visit_optional(V, ARG1, NAME)
    +visit_optional(V, NAME, ARG1)
    |
    -visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
    +visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
    |
    -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
    +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
    |
    -VISIT_TYPE(V, OBJ, NAME, ERR)
    +VISIT_TYPE(V, NAME, OBJ, ERR)
    )
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      51e72bc1
    • E
      qom: Use typedef for Visitor · 4fa45492
      由 Eric Blake 提交于 
      No need to repeat 'struct Visitor' when we already have it in
typedefs.h.  Omitting the redundant 'struct' also makes a later
patch easier to search for all object property callbacks that
are associated with a Visitor.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-18-git-send-email-eblake@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      4fa45492
  55. 05 2月, 2016 1 次提交
    • P
      qom: Clean up includes · 9bbc853b
      由 Peter Maydell 提交于 
      Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-13-git-send-email-peter.maydell@linaro.org
      9bbc853b
  57. 19 1月, 2016 1 次提交
    • D
      qom: Change object property iterator API contract · 7746abd8
      由 Daniel P. Berrange 提交于 
      Currently the ObjectProperty iterator API works as follows:

  ObjectPropertyIterator *iter;

  iter = object_property_iter_init(obj);
  while ((prop = object_property_iter_next(iter))) {
     ...
  }
  object_property_iter_free(iter);

This has the benefit that the ObjectPropertyIterator struct
can be opaque, but has the downside that callers need to
explicitly call a free function. It is also not in keeping
with iterator style used elsewhere in QEMU/GLib2.

This patch changes the API to use stack allocation instead:

  ObjectPropertyIterator iter;

  object_property_iter_init(&iter, obj);
  while ((prop = object_property_iter_next(&iter))) {
     ...
  }
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
[AF: Fused ObjectPropertyIterator struct with typedef]
Signed-off-by: NAndreas Färber <afaerber@suse.de>
      7746abd8