This has better performance because it executes fewer system calls
and does not use a bottom half per disk.

Originally proposed by Ming Lei.

[Changed #include "raw-aio.h" to "block/raw-aio.h" in win32-aio.c to fix
build error as reported by Peter Maydell <peter.maydell@linaro.org>.
--Stefan]
Acked-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1467650000-51385-1-git-send-email-pbonzini@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

squash! linux-aio: share one LinuxAioState within an AioContext

We have only one flag for now - Empty Image flag. The patch fixes unused
bits specification and marks bit 1 as usused.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

ppc patch queue 2016-07-18

Here's what ought to be the final ppc pull request before the 2.7 hard
freeze.  This set contains a rework of the DBDMA device for Mac
platforms, and some assorted cleanups and bugfixes.

# gpg: Signature made Mon 18 Jul 2016 05:35:27 BST
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.7-20160718:
  ppc: Yet another fix for the huge page support detection mechanism
  target-ppc: fix left shift overflow in hpte_page_shift
  ppc/mmu-hash64: Remove duplicated #include statement
  ppc: abort if compat property contains an unknown value
  spapr: Ensure CPU cores are added contiguously and removed in LIFO order
  vfio/spapr: Remove stale ioctl() call
  ppc: Fix support for odd MSR combinations
  dbdma: reset io->processing flag for unassigned DBDMA channel rw accesses
  dbdma: set FLUSH bit upon reception of flush command for unassigned DBDMA channels
  dbdma: fix load_word/store_word value endianness
  dbdma: fix endian of DBDMA_CMDPTR_LO during branch
  dbdma: add per-channel debugging enabled via DEBUG_DBDMA_CHANMASK
  dbdma: always define DBDMA_DPRINTF and enable debug with DEBUG_DBDMA
  spapr: fix core unplug crash
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Commit 86b50f2e ("Disable huge page support if it is not available
for main RAM") already made sure that huge page support is not announced
to the guest if the normal RAM of non-NUMA configurations is not backed
by a huge page filesystem. However, there is one more case that can go
wrong: NUMA is enabled, but the RAM of the NUMA nodes are not configured
with huge page support (and only the memory of a DIMM is configured with
it). When QEMU is started with the following command line for example,
the Linux guest currently crashes because it is trying to use huge pages
on a memory region that does not support huge pages:

 qemu-system-ppc64 -enable-kvm ... -m 1G,slots=4,maxmem=32G -object \
   memory-backend-file,policy=default,mem-path=/hugepages,size=1G,id=mem-mem1 \
   -device pc-dimm,id=dimm-mem1,memdev=mem-mem1 -smp 2 \
   -numa node,nodeid=0 -numa node,nodeid=1

To fix this issue, we've got to make sure to disable huge page support,
too, when there is a NUMA node that is not using a memory backend with
huge page support.

Fixes: 86b50f2eSigned-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

ps->pte_enc is a 32-bit value, which is shifted left and then compared
to a 64-bit value.  It needs a cast before the shift.

Reported by Coverity.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

No need to include error-report.h twice here.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

It is not possible to set the compat property to an unknown value with
powerpc_set_compat(). Something must have gone terribly wrong in QEMU,
if we detect an "Internal error" in powerpc_get_compat(). Let's abort then.

This patch also drops the "max_compat ? *max_compat : -1" construct. It is
useless since max_compat is dereferenced a few lines above.
Signed-off-by: NGreg Kurz <groug@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

If CPU core addition or removal is allowed in random order leading to
holes in the core id range (and hence in the cpu_index range), migration
can fail as migration with holes in cpu_index range isn't yet handled
correctly.

Prevent this situation by enforcing the addition in contiguous order
and removal in LIFO order so that we never end up with holes in
cpu_index range.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

This ioctl() call to VFIO_IOMMU_SPAPR_TCE_REMOVE was left over from an
earlier version of the code and has since been folded into
vfio_spapr_remove_window().

It wasn't caught because although the argument structure has been removed,
the libc function remove() means this didn't trigger a compile failure.
The ioctl() was also almost certain to fail silently and harmlessly with
the bogus argument, so this wasn't caught in testing.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>

MacOS uses an architecturally illegal MSR combination that
seems nonetheless supported by 32-bit processors, which is
to have MSR[PR]=1 and one or more of MSR[DR/IR/EE]=0.

This adds support for it. To work properly we need to also
properly include support for PR=1,{I,D}R=0 to the MMU index
used by the qemu TLB.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Otherwise MacOS 9 hangs upon shutdown.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

This fixes MacOS 9 whereby it continually flushes and polls the status bits
until they are set to indicate a successful flush.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The values to read/write to/from physical memory are copied directly to the
physical address with no endian swapping required.

Also add some extra information to debugging output while we are here.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The current DBDMA command is stored in little-endian format, so make sure
we convert it to match our CPU when updating the DBDMA_CMDPTR_LO register.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

By default large amounts of DBDMA debugging are produced when often it is just
1 or 2 channels that are of interest. Introduce DEBUG_DBDMA_CHANMASK to allow
the developer to select the channels of interest at compile time, and then
further add the extra channel information to each debug statement where
possible.

Also clearly mark the start/end of DBDMA_run_bh to allow tracking the bottom
half execution.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Enabling DBDMA_DPRINTF unconditionally ensures that any errors in debug
statements are picked up immediately.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

If the host has 8 threads/core and the guest is started with:

-smp cores=1,threads=4,maxcpus=12

It is possible to crash QEMU by doing:

(qemu) device_add host-spapr-cpu-core,core-id=16,id=foo
(qemu) device_del foo
Segmentation fault

This happens because spapr_core_unplug() assumes cpu_dt_id == core_id.
As long as cpu_dt_id is derived from the non-table cpu_index, this is
only true when you plug cores with contiguous ids.

It is safer to be consistent: the DR connector was created with an
index that is immediately written to cc->core_id, and spapr_core_plug()
also relies on cc->core_id.

Let's use it also in spapr_core_unplug().
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Update OpenBIOS images

# gpg: Signature made Fri 15 Jul 2016 15:22:36 BST
# gpg:                using RSA key 0x5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-openbios-signed:
  Update OpenBIOS images to b747b6a built from submodule.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

target-arm queue:
 * add virtio-mmio transport base address to device path
   (avoid an assertion failure with multiple virtio-scsi-devices)
 * revert hw/ptimer commit 5a50307b which causes regressions on
   SPARC guests
 * use Neon to accelerate zero-page checking on AArch64 hosts
 * set the MPIDR for TCG to match how KVM does it (and fit with
   GICv2/GICv3 restrictions on SGI target lists)
 * add some missing AArch32 TLBI hypervisor TLB operations
 * m25p80: Fix QIOR/DIOR handling for Winbond
 * hw/misc: fix typo in Aspeed SCU hw-strap2 property name
 * ast2400: pretend DMAs are done for U-boot
 * ast2400: some minor code cleanups

# gpg: Signature made Thu 14 Jul 2016 17:21:30 BST
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20160714:
  ast2400: externalize revision numbers
  ast2400: pretend DMAs are done for U-boot
  ast2400: replace aspeed_smc_is_implemented()
  hw/misc: fix typo in Aspeed SCU hw-strap2 property name
  m25p80: Fix QIOR/DIOR handling for Winbond
  target-arm: Add missed AArch32 TLBI sytem registers
  hw/arm/virt: tcg: adjust MPIDR like KVM
  gic: provide defines for v2/v3 targetlist sizes
  target-arm: Use Neon for zero checking
  Revert "hw/ptimer: Perform counter wrap around if timer already expired"
  virtio-mmio: format transport base address in BusClass.get_dev_path
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

AST2400_A0_SILICON_REV is defined twice. Fix this by including the
definition in the header file as well as the routine to check if a
silicon revision is supported. It will useful to reuse in other
controllers.

Let's add also AST2500_A0_SILICON_REV for future use.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Message-id: 1467994016-11678-5-git-send-email-clg@kaod.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

U-boot does SPI timing calibration using DMA tranfers. To let the
initialization continue, we fake success by setting the DMA status of
the Interrupt Control Register.

For the moment, DMA support is not required as it is not used in
normal operation.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Message-id: 1467994016-11678-4-git-send-email-clg@kaod.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

aspeed_smc_is_implemented() filters invalid registers in a peculiar
way. Let's remove it and open code the if conditions. It serves the
same purpose, the aesthetic is better, and new registers can easily be
added.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Message-id: 1467994016-11678-3-git-send-email-clg@kaod.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NCédric Le Goater <clg@kaod.org>
Message-id: 1467994016-11678-2-git-send-email-clg@kaod.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Winbond also support continuous read mode, but as an opposite for other
flash type read mode clock cycles are included to dummy cycles number.
This path add proper handling of read mode byte and update needed
dummy cycles. QPI mode and dummy cycles configuration are not supported.
Signed-off-by: NMarcin Krzeminski <marcin.krzeminski@nokia.com>
Reviewed-by: NCédric Le Goater <clg@kaod.org>
Message-id: 1467809036-6986-1-git-send-email-marcin.krzeminski@nokia.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Some PL2 related TLBI system registers are missed in AArch32
implementation. The patch fixes it.
Signed-off-by: NSergey Sorokin <afarallax@yandex.ru>
Message-id: 1468328885-3217862-1-git-send-email-afarallax@yandex.ru
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

KVM adjusts the MPIDR of guest vcpus based on the architecture of
the host, 32-bit vs. 64-bit, and, for 64-bit, also on the type of
GIC the guest is using. To be consistent and improve SGI efficiency
we make the same adjustments for TCG as 64-bit KVM hosts. We neglect
to add consistency with 32-bit KVM hosts, as that would reduce SGI
efficiency and KVM is expected to change.

As MPIDR is a system register, and thus guest visible, we only make
adjustments for current and later versioned machines.
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Message-id: 1467378129-23302-3-git-send-email-drjones@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NAndrew Jones <drjones@redhat.com>
Message-id: 1467378129-23302-2-git-send-email-drjones@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use Neon instructions to perform zero checking of
buffer. This is helps in reducing total migration time.

Use case: Idle VM live migration with 4 VCPUS and 8GB ram
running CentOS 7.

Without Neon, the Total migration time is 3.5 Sec

Migration status: completed
total time: 3560 milliseconds
downtime: 33 milliseconds
setup: 5 milliseconds
transferred ram: 297907 kbytes
throughput: 685.76 mbps
remaining ram: 0 kbytes
total ram: 8519872 kbytes
duplicate: 2062760 pages
skipped: 0 pages
normal: 69808 pages
normal bytes: 279232 kbytes
dirty sync count: 3

With Neon, the total migration time is 2.9 Sec

Migration status: completed
total time: 2960 milliseconds
downtime: 65 milliseconds
setup: 4 milliseconds
transferred ram: 299869 kbytes
throughput: 830.19 mbps
remaining ram: 0 kbytes
total ram: 8519872 kbytes
duplicate: 2064313 pages
skipped: 0 pages
normal: 70294 pages
normal bytes: 281176 kbytes
dirty sync count: 3
Signed-off-by: NVijaya Kumar K <vijayak@cavium.com>
Signed-off-by: NSuresh <ksuresh@cavium.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1467190029-694-2-git-send-email-vijayak@cavium.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Software should see timer counter wraparound only after IRQ being triggered.
This fixes regression introduced by the commit 5a50307b ("hw/ptimer: Perform
counter wrap around if timer already expired"), resulting in monotonic timer
jumping backwards on SPARC emulated machine running NetBSD guest OS, as
reported by Mark Cave-Ayland.
Signed-off-by: NDmitry Osipenko <digetx@gmail.com>
Message-id: 20160708132206.2080-1-digetx@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

At the moment the following QEMU command line triggers an assertion
failure (minimal reproducer by Cole):

  qemu-system-aarch64 \
    -machine virt-2.6,accel=tcg \
    -nodefaults \
    -no-user-config \
    -nographic -monitor stdio \
    -device virtio-scsi-device,id=scsi0 \
    -device virtio-scsi-device,id=scsi1 \
    -drive file=foo.img,format=raw,if=none,id=d0 \
    -device scsi-hd,bus=scsi0.0,drive=d0 \
    -drive file=foo.img,format=raw,if=none,id=d1 \
    -device scsi-hd,bus=scsi1.0,drive=d1

  qemu-system-aarch64: migration/savevm.c:615:
  vmstate_register_with_alias_id:
  Assertion `!se->compat || se->instance_id == 0' failed.

The reason is that the vmstate sections for the two scsi-hd devices are
not uniquely identifiable by name.

The direct parent buses of the scsi-hd devices -- scsi0.0 and scsi1.0 --
support the BusClass.get_dev_path member function. scsibus_get_dev_path()
formats a device path prefix with the help of its topologically parent
bus, and then appends the chan:id:lun triplet to it. For both scsi-hd
devices, this triplet is 0:0:0.

(Here we use "device path" in the QEMU migration sense, for vmstate
section identification, not in the OFW or UEFI device path senses.)

The virtio-scsi HBA is plugged into the virtio-mmio bus (implemented by
the internal VirtIOMMIOProxy device). This bus class
(TYPE_VIRTIO_MMIO_BUS) inherits, as its get_dev_path() member function,
the virtio_bus_get_dev_path() method from its parent class
(TYPE_VIRTIO_BUS).

virtio_bus_get_dev_path() does not format any kind of device address on
its own; "virtio addresses" are transport-specific. Therefore
virtio_bus_get_dev_path() asks the topologically parent bus of the proxy
object (implementing the specific virtio transport) to format the address
of the proxy object.

(For virtio-pci devices (where the proxy is an instance of VirtIOPCIProxy,
plugged into a PCI bus), this ends up in pcibus_get_dev_path().)

However, VirtIOMMIOProxy is usually (in practice: always) plugged into
"main-system-bus", the singleton TYPE_SYSTEM_BUS object. This BusClass
does not support formatting QEMU vmstate device paths at all (as
SysBusDevice objects can have zero or more IO ports and zero or more MMIO
regions). Hence the formatting request delegated from
virtio_bus_get_dev_path() gets answered with NULL.

The end result is that the two scsi-hd devices end up with the same device
path "0:0:0", which triggers the assert.

We can solve this by recognizing that virtio-mmio transports are
distinguished from each other by their base addresses in MMIO address
space. Implement virtio_mmio_bus_get_dev_path() as follows:

(1) The virtio device whose devpath is to be formatted resides on a
    virtio-mmio bus that is implemented by a VirtIOMMIOProxy object. Ask
    the parent bus of VirtIOMMIOProxy to format the device path of
    VirtIOMMIOProxy, as a path prefix. (This is identical to what
    virtio_bus_get_dev_path() does.)

(2) Append the base address of VirtIOMMIOProxy to the device path, such
    as:
    - virtio-mmio@000000000a003e00,
    - virtio-mmio@000000000a003c00.

Given that these device paths are placed in the migration stream, step (2)
above, if done unconditionally, would break migration. So make that step
conditional on a new VirtIOMMIOProxy property, which is enabled for 2.7
machine types and later.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Cole Robinson <crobinso@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Kevin Zhao <kevin.zhao@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Tom Hanson <thomas.hanson@linaro.org>
Reported-by: NKevin Zhao <kevin.zhao@linaro.org>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Message-id: 1467739394-28357-1-git-send-email-lersek@redhat.com
Fixes: https://bugs.launchpad.net/qemu/+bug/1594239Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* Updated fw_cfg option ROM to include DMA support

# gpg: Signature made Thu 14 Jul 2016 14:51:06 BST
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream-fwcfg:
  Add optionrom compatible with fw_cfg DMA version
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Xtensa-related fixes:

- fix FLASH interface width for XTFPGA boards.

# gpg: Signature made Thu 14 Jul 2016 12:00:05 BST
# gpg:                using RSA key 0x51F9CC91F83FA044
# gpg: Good signature from "Max Filippov <max.filippov@cogentembedded.com>"
# gpg:                 aka "Max Filippov <jcmvbkbc@gmail.com>"
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB  17D8 51F9 CC91 F83F A044

* remotes/xtensa/tags/20160714-xtensa:
  target-xtensa: xtfpga: fix FLASH interface width
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This optionrom is based on linuxboot.S.
Signed-off-by: NMarc Marí <markmb@redhat.com>
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>
Message-Id: <1464027093-24073-2-git-send-email-rjones@redhat.com>
[Add -fno-toplevel-reorder, support clang without -m16. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

* SCSI scanner support
* fixes to qemu-char and net exit
* FreeBSD fixes
* Other small bugfixes

# gpg: Signature made Wed 13 Jul 2016 12:30:11 BST
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  hostmem: detect host backend memory is being used properly
  hostmem: fix QEMU crash by 'info memdev'
  char: do not use atexit cleanup handler
  net: do not use atexit for cleanup
  slirp: use exit notifier for slirp_smb_cleanup
  tap: use an exit notifier to call down_script
  util: Fix MIN_NON_ZERO
  qemu-sockets: use qapi_free_SocketAddress in cleanup
  disas: avoid including everything in headers compiled from C++
  json-streamer: fix double-free on exiting during a parse
  main-loop: check return value before using pointer
  Use "-s" instead of "--quiet" to resolve non-fatal build error on FreeBSD.
  scsi-bus: Use longer sense buffer with scanners
  scsi-bus: Add SCSI scanner support
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

FLASH chip on XTFPGA boards is connected with 16-bit-wide interface.
Latest U-Boot can see the difference and does not work correctly with
32-bit-wide interface.
Set FLASH chip 'width' property to 2.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Block layer patches

# gpg: Signature made Wed 13 Jul 2016 12:46:17 BST
# gpg:                using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (34 commits)
  iotests: Make 157 actually format-agnostic
  vvfat: Fix qcow write target driver specification
  hmp: show all of snapshot info on every block dev in output of 'info snapshots'
  hmp: use snapshot name to determine whether a snapshot is 'fully available'
  qemu-iotests: Test naming of throttling groups
  blockdev: Fix regression with the default naming of throttling groups
  vmdk: fix metadata write regression
  Improve block job rate limiting for small bandwidth values
  qcow2: Fix qcow2_get_cluster_offset()
  qemu-io: Use correct range limitations
  qcow2: Avoid making the L1 table too big
  qemu-img: Use strerror() for generic resize error
  block: Remove BB options from blockdev-add
  qemu-iotests: Test setting WCE with qdev
  block/qdev: Allow configuring rerror/werror with qdev properties
  commit: Fix use of error handling policy
  block/qdev: Allow configuring WCE with qdev properties
  block/qdev: Allow node name for drive properties
  coroutine: move entry argument to qemu_coroutine_create
  test-coroutine: prepare for the next patch
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-sparc improvements, v4

# gpg: Signature made Tue 12 Jul 2016 19:04:33 BST
# gpg:                using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC  16A4 AD12 70CC 4DD0 279B

* remotes/rth/tags/pull-rth-20160712: (24 commits)
  target-sparc: Elide duplicate updates to fprs
  target-sparc: Use cpu_loop_exit_restore from helper_check_ieee_exceptions
  target-sparc: Use cpu_fsr in stfsr
  target-sparc: Use explicit writes to cpu_fsr
  target-sparc: Remove helper_ldf_asi, helper_stf_asi
  target-sparc: Directly implement block and short ldf/stf asis
  target-sparc: Directly implement easy ldf/stf asis
  target-sparc: Pass TCGMemOp constants to helper_ld/st_asi
  target-sparc: Fix obvious error in ASI_M_BFILL
  target-sparc: Directly implement easy ldd/std asis
  target-sparc: Introduce gen_check_align
  target-sparc: Use QT0 to return results from ldda
  target-sparc: Directly implement easy ld/st asis
  target-sparc: Use defines from asi.h
  target-sparc: Add UA2005 defines to asi.h
  target-sparc: Import linux/arch/sparc/include/uapi/asm/asi.h
  target-sparc: Pass TCGMemOp to gen_ld/st_asi
  target-sparc: Introduce get_asi
  target-sparc: Store %asi in TB flags
  target-sparc: Unify asi handling between 32 and 64-bit
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Block patches (v2) for the block queue.

# gpg: Signature made Wed Jul 13 13:41:53 2016 CEST
# gpg:                using RSA key 0x3BB14202E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1  1829 F407 DB00 61D5 CF40
#      Subkey fingerprint: 58B3 81CE 2DC8 9CF9 9730  EE64 3BB1 4202 E838 ACAD

* mreitz/tags/pull-block-for-kevin-2016-07-13:
  iotests: Make 157 actually format-agnostic
  vvfat: Fix qcow write target driver specification
  hmp: show all of snapshot info on every block dev in output of 'info snapshots'
  hmp: use snapshot name to determine whether a snapshot is 'fully available'
  qemu-iotests: Test naming of throttling groups
  blockdev: Fix regression with the default naming of throttling groups
  vmdk: fix metadata write regression
  Improve block job rate limiting for small bandwidth values
  qcow2: Fix qcow2_get_cluster_offset()
  qemu-io: Use correct range limitations
  qcow2: Avoid making the L1 table too big
  qemu-img: Use strerror() for generic resize error
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

iotest 157 pretends not to care about the image format used, but in fact
it does due to the format name not being filtered in its output. This
patch adds filtering and changes the reference output accordingly.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Message-id: 20160711132246.3152-1-mreitz@redhat.com
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>