The mmsghdr struct is only introduced in Linux 2.6.32; add a
configure check for it and disable L2TPV3 on hosts which are
too old to provide it, rather than simply failing to compile.
Reported-by: Nchenliang <chenliang88@huawei.com>
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1404219488-11196-1-git-send-email-arei.gonglei@huawei.com
[PMM: cleaned up commit message and corrected kernel version number]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

usb bugfixes.

# gpg: Signature made Tue 01 Jul 2014 14:51:19 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-usb-20140701-1:
  ccid-card-emulated: use EventNotifier
  usb: initialize libusb_device to avoid crash
  usb: Fix usb-bt-dongle initialization.
  input: fix jumpy mouse cursor with USB mouse emulation
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

vnc: two bugfixes (by Peter Lieven).

# gpg: Signature made Tue 01 Jul 2014 12:32:19 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-vnc-20140701-1:
  ui/vnc: fix potential memory corruption issues
  ui/vnc: limit client_cut_text msg payload size
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Shut up Coverity's complaint about unchecked fcntl return values,
and especially make the code simpler and more efficient.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Tracing pull request

# gpg: Signature made Tue 01 Jul 2014 09:56:27 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/tracing-pull-request:
  trace: add qemu_system_powerdown_request and qemu_system_shutdown_request trace events
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Block pull request

# gpg: Signature made Tue 01 Jul 2014 09:47:15 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request: (23 commits)
  block: add backing-file option to block-stream
  block: extend block-commit to accept a string for the backing file
  block: add helper function to determine if a BDS is in a chain
  block: add QAPI command to allow live backing file change
  qapi: Change back sector-count to sectors-count in quorum QAPI events.
  block/cow: Avoid use of uninitialized cow_bs in error path
  block: simplify bdrv_find_base() and bdrv_find_overlay()
  block: make 'top' argument to block-commit optional
  iotests: Add more tests to quick group
  iotests: Add qemu tests to quick group
  iotests: Simplify qemu-iotests-quick.sh
  qemu-img create: add 'nocow' option
  virtio-blk: remove need for explicit x-data-plane=on option
  qdev: drop iothread property type
  virtio-blk: replace x-iothread with iothread link property
  virtio-blk: move qdev properties into virtio-blk.c
  virtio: fix virtio-blk child refcount in transports
  virtio-blk: drop virtio_blk_set_conf()
  virtio-blk: use aliases instead of duplicate qdev properties
  qdev: add qdev_alias_all_properties()
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

this patch makes the VNC server work correctly if the
server surface and the guest surface have different sizes.

Basically the server surface is adjusted to not exceed VNC_MAX_WIDTH
x VNC_MAX_HEIGHT and additionally the width is rounded up to multiple of
VNC_DIRTY_PIXELS_PER_BIT.

If we have a resolution whose width is not dividable by VNC_DIRTY_PIXELS_PER_BIT
we now get a small black bar on the right of the screen.

If the surface is too big to fit the limits only the upper left area is shown.

On top of that this fixes 2 memory corruption issues:

The first was actually discovered during playing
around with a Windows 7 vServer. During resolution
change in Windows 7 it happens sometimes that Windows
changes to an intermediate resolution where
server_stride % cmp_bytes != 0 (in vnc_refresh_server_surface).
This happens only if width % VNC_DIRTY_PIXELS_PER_BIT != 0.

The second is a theoretical issue, but is maybe exploitable
by the guest. If for some reason the guest surface size is bigger
than VNC_MAX_WIDTH x VNC_MAX_HEIGHT we end up in severe corruption since
this limit is nowhere enforced.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

currently a malicious client could define a payload
size of 2^32 - 1 bytes and send up to that size of
data to the vnc server. The server would allocated
that amount of memory which could easily create an
out of memory condition.

This patch limits the payload size to 1MB max.

Please note that client_cut_text messages are currently
silently ignored.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

If libusb_get_device_list() fails, the uninitialized local variable
libusb_device would be passed to libusb_free_device_list(), that
will cause a crash, like:
(gdb) bt
 #0  0x00007fbbb4bafc10 in pthread_mutex_lock () from /lib64/libpthread.so.0
 #1  0x00007fbbb233e653 in libusb_unref_device (dev=0x6275682d627375)
     at core.c:902
 #2  0x00007fbbb233e739 in libusb_free_device_list (list=0x7fbbb6e8436e,
     unref_devices=<optimized out>) at core.c:653
 #3  0x00007fbbb6cd80a4 in usb_host_auto_check (unused=unused@entry=0x0)
     at hw/usb/host-libusb.c:1446
 #4  0x00007fbbb6cd8525 in usb_host_initfn (udev=0x7fbbbd3c5670)
     at hw/usb/host-libusb.c:912
 #5  0x00007fbbb6cc123b in usb_device_init (dev=0x7fbbbd3c5670)
     at hw/usb/bus.c:106
 ...

So initialize libusb_device at the begin time.
Signed-off-by: NJincheng Miao <jmiao@redhat.com>
Reviewed-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Due to an incomplete initialization, adding a usb-bt-dongle device through HMP
or QMP will cause a segmentation fault.
Signed-off-by: NHani Benhabiles <hani@linux.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Guest mouse pointer was jumpy, when moving host mouse in the vertical direction (see bug #1327800).
Signed-off-by: NChristian Burger <christian@krikkel.de>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

* remotes/bonzini/memory:
  qdev: correctly send DEVICE_DELETED for recursively-deleted devices
  memory: do not give a name to the internal exec.c regions
  memory: MemoryRegion: Add size property
  memory: MemoryRegion: Add may-overlap and priority props
  memory: MemoryRegion: Add container and addr props
  memory: MemoryRegion: replace owner field with QOM parent
  memory: MemoryRegion: QOMify
  memory: MemoryRegion: use /machine as default owner
  libqtest: escape strings in QMP commands, fix leak
  qom: object: Ignore refs/unrefs of NULL
  qom: object: remove parent pointer when unparenting
  mc146818rtc: add "rtc-time" link to "/machine/rtc"
  qom: allow creating an alias of a child<> property
  qom: add a generic mechanism to resolve paths
  qom: add object_property_add_alias()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

QOM and device refactorings

* QOM unparenting cleanup
* IRQ conversion to QOM

# gpg: Signature made Tue 01 Jul 2014 04:03:23 BST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/qom-devices-for-2.1:
  irq: Slim conversion of qemu_irq to QOM
  irq: Allocate IRQs individually
  hw: Fix qemu_allocate_irqs() leaks
  sdhci: Fix misuse of qemu_free_irqs()
  qom: Remove parent pointer when unparenting
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* remotes/bonzini/scsi-next:
  configure: Fix -lm test, so that tools can be compiled on hosts that require -lm
  virtio-scsi: scsi events must be converted to target endianness
  virtio-scsi: virtio_scsi_push_event() lacks VirtIOSCSIReq parsing
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We have the experience that the guest doesn't stop successfully
though it was instructed to shut down.

The root cause may be not in QEMU mostly.  However, QEMU is often
suspected at the beginning just because the issue occurred in
virtualization environment.

Therefore, we need to affirm that QEMU received the shutdown
request and raised ACPI irq from "virsh shutdown" command,
virt-manger or stopping QEMU process to the VM .
So that we can affirm the problems was belonged to the Guset OS
rather than the QEMU itself.

When we stop guests by "virsh shutdown" command or virt-manger,
or stopping QEMU process, qemu_system_powerdown_request() or
qemu_system_shutdown_request() is called. Then the below functions
in main_loop_should_exit() of Vl.c are called roughly in the
following order.

	if (qemu_powerdown_requested())
		qemu_system_powerdown()
			monitor_protocol_event(QEVENT_POWERDOWN, NULL)

	OR

	if(qemu_shutdown_requested()}
		monitor_protocol_event(QEVENT_SHUTDOWN, NULL);

The tracepoint of monitor_protocol_event() already exists, but no
tracepoints are defined for qemu_system_powerdown_request() and
qemu_system_shutdown_request(). So this patch adds two tracepoints for
the two functions. We believe that it will become much easier to
isolate the problem mentioned above by these tracepoints.
Signed-off-by: NYang Zhiyong <yangzy.fnst@cn.fujitsu.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

On some image chains, QEMU may not always be able to resolve the
filenames properly, when updating the backing file of an image
after a block job.

For instance, certain relative pathnames may fail, or drives may
have been specified originally by file descriptor (e.g. /dev/fd/???),
or a relative protocol pathname may have been used.

In these instances, QEMU may lack the information to be able to make
the correct choice, but the user or management layer most likely does
have that knowledge.

With this extension to the block-stream api, the user is able to change
the backing file of the active layer as part of the block-stream
operation.

This allows the change to be 'safe', in the sense that if the attempt
to write the active image metadata fails, then the block-stream
operation returns failure, without disrupting the guest.

If a backing file string is not specified in the command, the backing
file string to use is determined in the same manner as it was
previously.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

On some image chains, QEMU may not always be able to resolve the
filenames properly, when updating the backing file of an image
after a block commit.

For instance, certain relative pathnames may fail, or drives may
have been specified originally by file descriptor (e.g. /dev/fd/???),
or a relative protocol pathname may have been used.

In these instances, QEMU may lack the information to be able to make
the correct choice, but the user or management layer most likely does
have that knowledge.

With this extension to the block-commit api, the user is able to change
the backing file of the overlay image as part of the block-commit
operation.

This allows the change to be 'safe', in the sense that if the attempt
to write the overlay image metadata fails, then the block-commit
operation returns failure, without disrupting the guest.

If the commit top is the active layer, then specifying the backing
file string will be treated as an error (there is no overlay image
to modify in that case).

If a backing file string is not specified in the command, the backing
file string to use is determined in the same manner as it was
previously.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This is a small helper function, to determine if 'base' is in the
chain of BlockDriverState 'top'.  It returns true if it is in the chain,
and false otherwise.

If either argument is NULL, it will also return false.
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This allows a user to make a live change to the backing file recorded in
an open image.

The image file to modify can be specified 2 ways:

1) image filename
2) image node-name

Note: this does not cause the backing file itself to be reopened; it
merely changes the backing filename in the image file structure, and
in internal BDS structures.

It is the responsibility of the user to pass a filename string that
can be resolved when the image chain is reopened, and the filename
string is not validated.

A good analogy for this command is that it is a live version of
'qemu-img rebase -u', with respect to changing the backing file string.

[Jeff is offline so I respun this patch in his absence.  Dropped image
filename since using node-name is preferred and this is a new command.
No need to introduce the limitations of finding images by filename.
--Stefan]
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The existing test whether "-lm" needs to be included or not is
insufficient as it reports false negative on Fedora20/ppc64.
This happens because sin(0.0) is a constant value which compiler
can safely throw away and therefore there is no need to add "-lm".
As the result, qemu-nbd/qemu-io/qemu-img tools cannot compile.

This adds a global variable and uses it in the test to prevent
from optimization.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
[Use Peter's improvement on the test to fool LTO, and remove the
 now useless -lm addition in Makefile.target. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When a device is unparented (i.e. made completely hidden from management)
we want to send a DEVICE_DELETED event only if the device actually was
realized.  This avoids raising DEVICE_DELETED events when device_add
fails.

However, this does not work right for recursively-deleted
devices: the whole tree is _first_ unrealized, _then_ unparented.
Then device_unparent sees realized==false and fails to trigger
the event.  The solution is simply to move have_realized into
the DeviceState struct.  If device_add fails, we never set the
new field to true and DEVICE_DELETED is not sent.

Fixes qemu-iotests testcase 067 (broken by commit 5942a190, though that
commit in turn fixed a possible segfault in the same test).
Reported-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

There is no need to have them visible under /machine.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

To allow devices to dynamically resize the device. The motivation is
to allow devices with variable size to init their memory_region
without size early and then correctly populate size at realize() time.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

QOM propertyify the .may-overlap and .priority fields. The setters
will re-add the memory as a subregion if needed (i.e. the values change
when the memory region is already contained).
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
[Remove setters. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Expose the already existing .parent and .addr fields as QOM properties.
.parent (i.e. the field describing the memory region that contains this
one in Memory hierachy) is renamed "container". This is to avoid
confusion with the QOM parent.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
[Remove setters.  Do not unref parent on releasing the property. Clean
 up error propagation. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The two are now the same.
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

QOMify memory regions as an Object. The former init() and destroy()
routines become instance_init() and instance_finalize() resp.

memory_region_init() is re-implemented to be:
object_initialize() + set fields

memory_region_destroy() is re-implemented to call unparent().
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
[Add newly-created MR as child, unparent on destruction. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This will be added (after QOMification) as the QOM parent.
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

libqtest is using g_strdup_printf to format QMP commands, but
this does not work if the argument strings need to be escaped.
Instead, use the fancy %-formatting functionality of QObject.
The only change required in tests is that strings have to be
formatted as %s, not '%s' or \"%s\".  Luckily this usage of
parameterized QMP commands is not that frequent.

The leak is in socket_sendf.  Since we are extracting the send
loop to a new function, fix it now.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Just do nothing if passed NULL for a ref or unref. This avoids
call sites that manage a combination of NULL or non-NULL pointers
having to add iffery around every ref and unref.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Certain parts of the QOM framework test this pointer to determine if
an object is parented. Nuke it when the object is unparented to allow
for reuse of an object after unparenting.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a link to rtc under /machine providing a stable
location for management apps to query the value of the
time.  The link should be added by any object that sends
RTC_TIME_CHANGE events.

{"execute":"qom-get","arguments":{"path":"/machine","property":"rtc-time"} }

Suggested by Paolo Bonzini and Andreas Faerber.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Child properties must be unique.  Fix this problem by
turning their aliases into links.

The resolve function that forwards to the target property
does not have any knowledge of the target property's type,
so it works fine.
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It may be desirable to have custom link<> properties that do more
than just store an object.  Even the addition of a "check"
function is not enough if setting the link has side effects
or if a non-standard reference counting is preferrable.

Avoid the assumption that the opaque field of a link<> is a
LinkProperty struct, by adding a generic "resolve" callback
to ObjectProperty.  This fixes aliases of link properties.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

fe069d9d had aligned code and documentation while dropping the s from the
actual JSON output. Fix that.

This also fix test/qemu-iotest/081 since the missing s was causing a permutation.
Signed-off-by: NBenoit Canet <benoit@irqsave.net>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Commit 25814e89 introduced an error-exit code path which does
a "goto exit" before the cow_bs variable is initialized, meaning
we would call bdrv_unref() on an uninitialized variable and
likely segfault. Fix this by moving the NULL-initialization
to the top of the function and making the exit code path handle
the case where it is NULL.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This simplifies the function bdrv_find_overlay().  With this change,
bdrv_find_base() is just a subset of usage of bdrv_find_overlay(),
so this also takes advantage of that.
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Now that active layer block-commit is supported, the 'top' argument
no longer needs to be mandatory.

Change it to optional, with the default being the active layer in the
device chain.

[kwolf: Rebased and resolved conflict in tests/qemu-iotests/040]
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

While at it, add some more tests to the quick group (those that run with
-nocache in under three seconds on my HDD).
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Now that qemu-iotests-quick.sh supports tests using the qemu binary, we
are free to add such tests to the quick group.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>