- 28 9月, 2012 12 次提交
-
-
由 Paolo Bonzini 提交于
Fix qemu_aio_wait() to ensure that registered aio handlers don't get deleted when they are still active. This is ensured by maintaning the right count of walking_handlers. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Jeff Cody 提交于
Currently, after a live snapshot of a drive, the image that has been 'demoted' to be below the new active layer remains r/w. This patch reopens it read-only. Note that we do not check for error on the reopen(), because we will not abort the snapshots if the reopen fails. This patch depends on the bdrv_reopen() series. Signed-off-by: NJeff Cody <jcody@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
When cancelling block migration, all in-flight requests of the block migration must be completed before the data can be freed. This was visible as failing assertions and segfaults. Reported-by: NPeter Lieven <pl@dlhnet.de> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
git://git.linaro.org/people/pmaydell/qemu-arm由 Aurelien Jarno 提交于
* 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm: Versatile Express: Add modelling of NOR flash Versatile Express: Fix NOR flash 0 address and remove flash alias hw/armv7m_nvic: Correctly register GIC region when setting up NVIC pl190: fix read of VECTADDR
-
由 Richard Henderson 提交于
The blank lines inside the single dump make it difficult for the eye to pick out the block. Worse, with interior newlines, but no blank line following, the PSW line appears to belong to the next dump block. Reviewed-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
This is already handled generically in cpu_exec. Reviewed-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Three places in the interrupt code did we not honor the mask. Reviewed-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Acked-by: NGuan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Cc: Alexander Graf <agraf@suse.de> Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Cc: Paul Brook <paul@codesourcery.com> Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
For all targets that currently call tcg_gen_debug_insn_start, add CPU_LOG_TB_OP_OPT to the condition that gates it. This is useful for comparing optimization dumps, when the pre-optimization dump is merely noise. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Stefan Weil 提交于
Support for helper functions with 5 arguments was missing in the code generator and in the interpreter. There is no need to pass the constant TCG_AREG0 from the code generator to the interpreter. Remove that code for the INDEX_op_qemu_st* opcodes. Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 26 9月, 2012 28 次提交
-
-
由 Francesco Lavra 提交于
This patch adds modelling of the two NOR flash banks found on the Versatile Express motherboard. Tested with U-Boot running on an emulated Versatile Express, with either A9 or A15 CoreTile. Signed-off-by: NFrancesco Lavra <francescolavra.fl@gmail.com> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Francesco Lavra 提交于
In the A series memory map (implemented in the Cortex A15 CoreTile), the first NOR flash bank (flash 0) is mapped to address 0x08000000, while address 0x00000000 can be configured as alias to either the first or the second flash bank. This patch fixes the definition of flash 0 address, and for simplicity removes the alias definition. Signed-off-by: NFrancesco Lavra <francescolavra.fl@gmail.com> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Meador Inge 提交于
When setting up the NVIC memory regions the memory range 0x100..0xcff is aliased to an IO memory region that belongs to the ARM GIC. This aliased region should be added to the NVIC memory container, but the actual GIC IO memory region was being added instead. This mixup was causing the wrong IO memory access functions to be called when accessing parts of the NVIC memory. Signed-off-by: NMeador Inge <meadori@codesourcery.com> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Brendan Fennell 提交于
Reading VECTADDR was causing us to set the current priority to the wrong value, the most obvious effect of which was that we would return the vector for the wrong interrupt as the result of the read. Signed-off-by: NBrendan Fennell <bfennell@skynet.ie> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Amos Kong 提交于
Added an option to let qemu transfer a configuration file to bios, "etc/boot-fail-wait", which could be specified by command -boot reboot-timeout=T T have a max value of 0xffff, unit is ms. With this option, guest will wait for a given time if not find bootabled device, then reboot. If reboot-timeout is '-1', guest will not reboot, qemu passes '-1' to bios by default. This feature need the new seabios's support. Seabios pulls the value from the fwcfg "file" interface, this interface is used because SeaBIOS needs a reliable way of obtaining a name, value size, and value. It in no way requires that there be a real file on the user's host machine. Signed-off-by: NAmos Kong <akong@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Orit Wasserman 提交于
Signed-off-by: NOrit Wasserman <owasserm@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Orit Wasserman 提交于
getaddrinfo can give us a list of addresses, but we only try to connect to the first one. If that fails we never proceed to the next one. This is common on desktop setups that often have ipv6 configured but not actually working. To fix this make inet_connect_nonblocking retry connection with a different address. callers on inet_nonblocking_connect register a callback function that will be called when connect opertion completes, in case of failure the fd will have a negative value Signed-off-by: NOrit Wasserman <owasserm@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Orit Wasserman 提交于
No need to add non blocking parameters to the blocking inet_connect add block parameter for inet_connect_opts instead of using QemuOpt "block". Signed-off-by: NOrit Wasserman <owasserm@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Michael S. Tsirkin 提交于
refactor address resolution code to fix nonblocking connect remove getnameinfo call Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAmos Kong <akong@redhat.com> Signed-off-by: NOrit Wasserman <owasserm@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Weil 提交于
The old code aborted configure when no emulation target was selected. Even after removing the 'exit 1', it tried to read from STDIN when QEMU was configured with configure' '--disable-user' '--disable-system' This is fixed here. Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
This patch adds a "use64" property which will make the ivshmem driver register a 64bit memory bar when set, so you have something to play with when testing 64bit pci bits. It also allows to have quite big shared memory regions, like this: [root@fedora ~]# lspci -vs1:1 01:01.0 RAM memory: Red Hat, Inc Device 1110 Subsystem: Red Hat, Inc Device 1100 Physical Slot: 1-1 Flags: fast devsel Memory at fd400000 (32-bit, non-prefetchable) [disabled] [size=256] Memory at 8040000000 (64-bit, prefetchable) [size=1G] [ v5: rebase, update compat property for post-1.2 merge ] [ v4: rebase & adapt to latest master again ] [ v3: rebase & adapt to latest master ] [ v2: default to on as suggested by avi, turn off for pc-$old using compat property ] Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Tested-by: NCam Macdonell <cam@cs.ualberta.ca> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Igor Mammedov 提交于
All deps that used global qemu_system_powerdown var are now converted to notifiers, so remove it. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Igor Mammedov 提交于
Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Igor Mammedov 提交于
Acked-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Igor Mammedov 提交于
In addition, there is no need to allocate an extra irq just for rising SCI in irq handler. Just rise SCI right from notifier handler instead. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Igor Mammedov 提交于
Notifier will be used for signaling powerdown request to guest in a more general way and intended to replace very specific qemu_irq_rise(qemu_system_powerdown) and will allow to remove global variable qemu_system_powerdown. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
* origin/master: tcg/i386: fix build with -march < i686 tcg: Streamline movcond_i64 using movcond_i32 tcg: Streamline movcond_i64 using 32-bit arithmetic tcg: Sanity check goto_tb input tcg: Sanity check deposit inputs tcg: Add tcg_debug_assert tcg: Implement concat*_i64 with deposit_i64 tcg: Emit XORI as NOT for appropriate constants tcg: Optimize initial inputs for ori_i64 tcg: Emit ANDI as EXTU for appropriate constants tcg: Adjust descriptions of *cond opcodes tcg/mips: fix MIPS32(R2) detection
-
由 Aurelien Jarno 提交于
The movcond_i32 op has to be protected with TCG_TARGET_HAS_movcond_i32 to fix the build with -march < i686. Thanks to Richard Henderson for the hint. Reported-by: NAlex Barcelo <abarcelo@ac.upc.edu> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
When movcond_i32 is available we can further reduce the generated op count from 12 to 6, and the generated code size on i686 from 88 to 74 bytes. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Avoiding 64-bit arithmetic (outside of the compare) reduces the generated op count from 15 to 12, and the generated code size on i686 from 105 to 88 bytes. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Checking that we don't try for idx != [01] is trivial. Checking that we don't issue more than one of any index requires a tad more data and some ifdefs protecting that new variable. Signed-off-by: NRichard Henderson <rth@twiddle.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Given these are constants, checking once here means everything after can assume they're correct. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Like the C assert macro, except only enabled for CONFIG_DEBUG_TCG, and without having to set _NDEBUG and disable all other asserts at the same time. The use of __builtin_unreachable (when available) gives the compiler the same information, which may (or may not) help it optimize better. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
For tcg_gen_concat_i32_i64 we only use deposit if the host supports it. For tcg_gen_concat32_i64 even if the host does not, as we get identical code before and after. Note that this relies on the ANDI -> EXTU patch for the identity claim. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Note that xori_i64 failed to perform even the minimal optimizations promised by the README. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Copy the same optimizations from ori_i32. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-