- 12 5月, 2012 4 次提交
-
-
由 Artyom Tarasenko 提交于
Fix UltraSPARC/JPS1/UA2007 VIS block load instructions broken in 30038fd8. Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com> [blauwirbel@gmail.com: trimmed unwanted part of patch] Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Artyom Tarasenko 提交于
According to UltraSPARC - IIi User's manual: 14.1.11 Address Masking (Impdep #125) When PSTATE.AM=1, the CALL, JMPL, and RDPC instructions and all traps transmit zero in the high-order 32-bits of the PC to their specified destination registers. Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Paolo Bonzini 提交于
This is a partial revert of commits a369da5f (vga: improve VGA logic, committed 2012-01-22) and c5bd4f3d (vga: fix -nodefaults -device VGA, 2012-01-24) which broke command-line option parsing in different ways. Since commit a369da5f it has become impossible to specify a VGA device entirely with QemuOpts-enabled options, i.e. without needing an explicit "-vga none". In addition, until commit c5bd4f3d -nodefaults would not disable the device you specified with the legacy "-vga" option, independent of the order. Since commit c5bd4f3d QEMU -nodefaults will override a previous -vga option. I did not reintroduce machine->no_vga. Boards can simply ignore the vga_interface_type variable, and most will indeed do so. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Max Filippov 提交于
Cleanup commit e5548617 have changed code_address calculation in the tlb_set_page function in case of access to a page with a watchpoint. This caused QEMU segfault in the xtensa test_break unit test. Fix it by moving code_address assignment above memory_region_section_get_iotlb call. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 10 5月, 2012 7 次提交
-
-
由 Peter Maydell 提交于
The macro definition of cpu_init meant that if cpu_arm_init() returned NULL this wouldn't result in cpu_init() itself returning NULL. This had the effect that "-cpu foo" for some unknown CPU name 'foo' would cause ARM targets to segfault rather than generating a useful error message. Fix this by making cpu_init a simple inline function. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Acked-by: NAndreas Färber <afaerber@suse.de>
-
由 Matt Craighead 提交于
This patch fixes a bug affecting a variety of Neon instructions, such as VQADD. Signed-off-by: NMatt Craighead <mjcraighead@gmail.com> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Adjust the tcg_out_qemu_{ld,st}() slow paths to pass AREG0 in r3, based on patches by malc. Also adjust the registers clobbered, based on patch by Alex. Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAlexander Graf <agraf@suse.de> [AF: Do not hardcode r3 for AREG0, requested by Alex] Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
This accounts for the additional addr_reg2 register. Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Also assure i64 alignment where necessary. Alignment code optimization suggested by malc. Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
For targets where TARGET_LONG_BITS != 32, i.e. 64-bit guests, addr_reg is moved to r4. For hosts without TCG_TARGET_CALL_ALIGN_ARGS either data_reg2 or data_reg or a masked version thereof would overwrite r4. Place it in r5 instead, matching TCG_TARGET_CALL_ALIGN_ARGS hosts. This fixes immediate crashes of 64-bit guests observed on Darwin/ppc but not on Darwin/ppc64. Signed-off-by: NAndreas Färber <andreas.faerber@web.de> Acked-by: Nmalc <av1474@comtv.ru> Acked-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 09 5月, 2012 14 次提交
-
-
由 Anthony Liguori 提交于
* qmp/queue/qmp: hmp: fix bad value conversion for M type hmp: expr_unary(): check for overflow in strtoul()/strtoull() vl: drop is_suspended variable runstate: introduce suspended state qapi-schema.json: fix RunState enums alphabetical order wakeup on migration
-
由 Luiz Capitulino 提交于
The M type converts from megabytes to bytes. However, the value can be negative before the conversion, which will lead to a flawed conversion. For example, this: (qemu) balloon -1000000000000011 (qemu) Just "works", but the value passed by the balloon command will be something else. This patch fixes this problem by requering a positive value before converting. There's really no reason to accept a negative value for the M type. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Luiz Capitulino 提交于
It's not checked currently, so something like: (qemu) balloon -100000000000001111114334234 (qemu) Will just "work" (in this case the balloon command will get a random value). Fix it by checking if strtoul()/strtoull() overflowed. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Luiz Capitulino 提交于
Check for the RUN_STATE_SUSPENDED state instead. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
QEMU enters in this state when the guest suspends to ram (S3). This is important so that HMP users and QMP clients can know that the guest is suspended. QMP also has an event for this, but events are not reliable and are limited (ie. a client can connect to QEMU after the event has been emitted). Having a different state for S3 brings a new issue, though. Every device that doesn't run when the VM is stopped but wants to run when the VM is suspended has to check for RUN_STATE_SUSPENDED explicitly. This is the case for the keyboard and mouse devices, for example. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Acked-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Gerd Hoffmann 提交于
Wakeup the guest when the live part of the migation is finished. This avoids being in suspended state on migration, so we don't have to save the is_suspended bit. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Peter Maydell 提交于
h2g() will assert if passed an address that's not a valid guest address, so handle_cpu_signal() needs to check before passing "data address which caused a segfault" to it, since for a misbehaving guest that could be anything. If the address isn't a valid guest address then we can simply skip the attempt to unprotect a guest page which was made read-only to catch self-modifying code. This assertion probably fires more readily now than it used to do because of recent changes to default to reserving guest address space. Acked-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
The script is organized as a sequence of binfmt registrations, with a check whether the to be registered architecture matches the host. Add a missing fi for the SuperH section. Reported-by: NAlexander Graf <agraf@suse.de> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
State struct CPU had been renamed to CPUState, former CPUState to CPUArchState. Signed-off-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
When auto-detecting VirtFS support, virtfs="". Set it to "no" after checking whether it was explicitly requested through --enable-virtfs. Signed-off-by: NAndreas Färber <afaerber@suse.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Avoid tab-indention and fit in with the surrounding code. Signed-off-by: NAndreas Färber <afaerber@suse.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Weil 提交于
Code which is compiled with CONFIG_TCG_DEBUG (set by configure option --enable-debug-tcg) should not disable the assert macro by defining NDEBUG. With the wrong macro name CONFIG_TCG_DEBUG, all assertions in tci.c were completely useless because NDEBUG was always defined. Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Faerber 提交于
sys/param.h is needed for __FreeBSD_version. Pointed out by Juergen, thanks. Signed-off-by: NAndreas Faerber <andreas.faerber@web.de> Cc: Juergen Lock <nox@jelal.kn-bremen.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 08 5月, 2012 12 次提交
-
-
由 Anthony Liguori 提交于
* mst/tags/for_anthony: rtl8139: fix regression in TxStatus/TxAddr read
-
由 Anthony Liguori 提交于
* kwolf/for-anthony: fdc: simplify media change handling qcow2: lock on prealloc block: make bdrv_create adopt coroutine qcow2: Limit COW to where it's needed sheepdog: switch to writethrough mode if cluster doesn't support flush
-
由 Anthony Liguori 提交于
* bonzini/scsi-next: scsi: Add assertion for use-after-free errors scsi: remove useless debug messages scsi: set VALID bit to 0 in fixed format sense data scsi: do not require a minimum allocation length for REQUEST SENSE scsi: do not require a minimum allocation length for INQUIRY scsi: parse 16-byte tape CDBs scsi: do not report bogus overruns for commands in the 0x00-0x1F range scsi-disk: add dpofua property scsi: change "removable" field to host many features scsi: Specify the xfer direction for UNMAP and ATA_PASSTHROUGH commands scsi: fix WRITE SAME transfer length and direction scsi: fix refcounting for reads scsi: prevent data transfer overflow ISCSI: Add support for thin-provisioning via discard/UNMAP and bigger LUNs
-
由 Anthony Liguori 提交于
* riku/linux-user-for-upstream: linux-user: fix emulation of /proc/self/maps linux-user: Clean up interim solution for exit syscall
-
由 Anthony Liguori 提交于
* spice/spice.v54: qxl: don't assert on guest create_guest_primary qxl: ioport_write: remove guest trigerrable abort qxl: qxl_add_memslot: remove guest trigerrable panics qxl: interface_notify_update: remove guest trigerrable abort qxl: cleanup s/__FUNCTION__/__func__/ qxl: don't abort on guest trigerrable ring indices mismatch qxl: fix > 80 chars line qxl: replace panic with guest bug in qxl_track_command qxl: check for NULL return from qxl_phys2virt hw/qxl.c: qxl_phys2virt: replace panics with guest_bug spice_info: add mouse_mode spice: require spice-protocol >= 0.8.1
-
由 Anthony Liguori 提交于
* sweil/fixes: qemu-timer: Fix limits for w32 mmtimer qom: Fix memory leak in function container_get hw/pc_sysfw: Fix memory leak qdev: Fix memory leak in function set_pci_devfn arm-semi: Rename SYS_XXX macros to TARGET_SYS_XXX (fixes compiler warning) target-mips: Remove unused inline function
-
由 Avi Kivity 提交于
Commit afe0a595 added byte reads for TxStatus/TxAddr, but broke 32-bit reads; the mask generation (1 << (8 * size)) - 1 is unspecified in C for size >= sizeof(int), and in fact returns 0 on x86. Fix by using a larger type. Fixes (at least) Fedora 9 i386 with -machine kernel_irqchip=on. I didn't see it with the qemu APIC implementation; may be due to timing or (more likely) a tester error. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Hervé Poussineau 提交于
This also (partly) fixes IBM OS/2 Warp 4.0 floppy installation, where not all floppies have the same format (2x80x18 for the first ones, 2x80x23 for the next ones). Signed-off-by: NHervé Poussineau <hpoussin@reactos.org> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Zhi Yong Wu 提交于
preallocate() will be locked. This is required because qcow2_alloc_cluster_link_l2() assumes that it runs under a lock that it can drop while COW is being performed. Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Zhi Yong Wu 提交于
The current qemu.git introduces failure with preallocation and some sizes: qemu-img create -f qcow2 new.img 976563K -o preallocation=metadata qemu-img: qemu-coroutine-lock.c:111: qemu_co_mutex_unlock: Assertion `mutex->locked == 1' failed. And lock needs to work in coroutine context. So to fix this issue, we need to make bdrv_create adopt coroutine at first. Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
This fixes a regression introduced in commit 250196f1. The bug leads to data corruption, found during an Autotest run with a Fedora 8 guest. Consider a write request whose first part is covered by an already allocated cluster, but additional clusters need to be newly allocated. When counting the number of clusters to allocate, the qcow2 code would decide to do COW for all remaining clusters of the write request, even if some of them are already allocated. If during this COW operation another write request is issued that touches the same cluster, it will still refer to the old cluster. When the COW completes, the first request will update the L2 table and the second write request will be lost. Note that the requests need not overlap, it's enough for them to touch the same cluster. This patch ensures that only clusters that really require COW are considered for allocation. In this case any other request writing to the same cluster will be an allocating write and gets serialised. Reported-by: NMarcelo Tosatti <mtosatti@redhat.com> Tested-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 MORITA Kazutaka 提交于
This is necessary for qemu to work with the older version of Sheepdog which doesn't support SD_OP_FLUSH_VDI. Signed-off-by: NMORITA Kazutaka <morita.kazutaka@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 07 5月, 2012 3 次提交
-
-
由 Hans de Goede 提交于
The Linux AC97 driver tests this bit to decide wether or not to show an External amplifier toggle control. This patch was also tested with a Windows XP guest without any issues. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 Hans de Goede 提交于
The Linux ac97 drivers does a number of register read/write tests to see how much resolution a volume control actually has. This patch takes this into account by masking out any bits written to a volume control reg which should not be there according to the spec. After this the Linux ac97 driver correctly uses a range of 0 - 0x1f for the PCM out volume, as stated in the spec, and we can fix the FIXME in update_combined_volume_out(). This patch was also tested with a Windows XP guest without any issues. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 Hans de Goede 提交于
After commit 19677a38: "hw/ac97: add support for volume control" We are (correctly) using AC97_Record_Gain_Mute and not AC97_Line_In_Volume_Mute for recording volume, but various places in hw/ac97 were still assumimg that we are using AC97_Line_In_Volume_Mute for record volume control, this patch fixes this. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: Nmalc <av1474@comtv.ru>
-