hw/intc/arm_gicv3: Implement gicv3_cpuif_update()

Implement the gicv3_cpuif_update() function which deals with correctly
asserting IRQ and FIQ based on the current running priority of the CPU,
the priority of the highest priority pending interrupt and the CPU's
current exception level and security state.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NShannon Zhao <shannon.zhao@linaro.org>
Tested-by: NShannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-17-git-send-email-peter.maydell@linaro.org

hw/intc/arm_gicv3_cpuif.c

@@ -36,6 +36,142 @@ static bool gicv3_use_ns_bank(CPUARMState *env)
     return !arm_is_secure_below_el3(env);
 }
 
+static int icc_highest_active_prio(GICv3CPUState *cs)
+{
+    /* Calculate the current running priority based on the set bits
+     * in the Active Priority Registers.
+     */
+    int i;
+
+    for (i = 0; i < ARRAY_SIZE(cs->icc_apr[0]); i++) {
+        uint32_t apr = cs->icc_apr[GICV3_G0][i] |
+            cs->icc_apr[GICV3_G1][i] | cs->icc_apr[GICV3_G1NS][i];
+
+        if (!apr) {
+            continue;
+        }
+        return (i * 32 + ctz32(apr)) << (GIC_MIN_BPR + 1);
+    }
+    /* No current active interrupts: return idle priority */
+    return 0xff;
+}
+
+static uint32_t icc_gprio_mask(GICv3CPUState *cs, int group)
+{
+    /* Return a mask word which clears the subpriority bits from
+     * a priority value for an interrupt in the specified group.
+     * This depends on the BPR value:
+     *  a BPR of 0 means the group priority bits are [7:1];
+     *  a BPR of 1 means they are [7:2], and so on down to
+     *  a BPR of 7 meaning no group priority bits at all.
+     * Which BPR to use depends on the group of the interrupt and
+     * the current ICC_CTLR.CBPR settings.
+     */
+    if ((group == GICV3_G1 && cs->icc_ctlr_el1[GICV3_S] & ICC_CTLR_EL1_CBPR) ||
+        (group == GICV3_G1NS &&
+         cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_CBPR)) {
+        group = GICV3_G0;
+    }
+
+    return ~0U << ((cs->icc_bpr[group] & 7) + 1);
+}
+
+static bool icc_no_enabled_hppi(GICv3CPUState *cs)
+{
+    /* Return true if there is no pending interrupt, or the
+     * highest priority pending interrupt is in a group which has been
+     * disabled at the CPU interface by the ICC_IGRPEN* register enable bits.
+     */
+    return cs->hppi.prio == 0xff || (cs->icc_igrpen[cs->hppi.grp] == 0);
+}
+
+static bool icc_hppi_can_preempt(GICv3CPUState *cs)
+{
+    /* Return true if we have a pending interrupt of sufficient
+     * priority to preempt.
+     */
+    int rprio;
+    uint32_t mask;
+
+    if (icc_no_enabled_hppi(cs)) {
+        return false;
+    }
+
+    if (cs->hppi.prio >= cs->icc_pmr_el1) {
+        /* Priority mask masks this interrupt */
+        return false;
+    }
+
+    rprio = icc_highest_active_prio(cs);
+    if (rprio == 0xff) {
+        /* No currently running interrupt so we can preempt */
+        return true;
+    }
+
+    mask = icc_gprio_mask(cs, cs->hppi.grp);
+
+    /* We only preempt a running interrupt if the pending interrupt's
+     * group priority is sufficient (the subpriorities are not considered).
+     */
+    if ((cs->hppi.prio & mask) < (rprio & mask)) {
+        return true;
+    }
+
+    return false;
+}
+
+void gicv3_cpuif_update(GICv3CPUState *cs)
+{
+    /* Tell the CPU about its highest priority pending interrupt */
+    int irqlevel = 0;
+    int fiqlevel = 0;
+    ARMCPU *cpu = ARM_CPU(cs->cpu);
+    CPUARMState *env = &cpu->env;
+
+    trace_gicv3_cpuif_update(gicv3_redist_affid(cs), cs->hppi.irq,
+                             cs->hppi.grp, cs->hppi.prio);
+
+    if (cs->hppi.grp == GICV3_G1 && !arm_feature(env, ARM_FEATURE_EL3)) {
+        /* If a Security-enabled GIC sends a G1S interrupt to a
+         * Security-disabled CPU, we must treat it as if it were G0.
+         */
+        cs->hppi.grp = GICV3_G0;
+    }
+
+    if (icc_hppi_can_preempt(cs)) {
+        /* We have an interrupt: should we signal it as IRQ or FIQ?
+         * This is described in the GICv3 spec section 4.6.2.
+         */
+        bool isfiq;
+
+        switch (cs->hppi.grp) {
+        case GICV3_G0:
+            isfiq = true;
+            break;
+        case GICV3_G1:
+            isfiq = (!arm_is_secure(env) ||
+                     (arm_current_el(env) == 3 && arm_el_is_aa64(env, 3)));
+            break;
+        case GICV3_G1NS:
+            isfiq = arm_is_secure(env);
+            break;
+        default:
+            g_assert_not_reached();
+        }
+
+        if (isfiq) {
+            fiqlevel = 1;
+        } else {
+            irqlevel = 1;
+        }
+    }
+
+    trace_gicv3_cpuif_set_irqs(gicv3_redist_affid(cs), fiqlevel, irqlevel);
+
+    qemu_set_irq(cs->parent_fiq, fiqlevel);
+    qemu_set_irq(cs->parent_irq, irqlevel);
+}
+
 static uint64_t icc_pmr_read(CPUARMState *env, const ARMCPRegInfo *ri)
 {
     GICv3CPUState *cs = icc_cs_from_env(env);
@@ -617,7 +753,9 @@ static const ARMCPRegInfo gicv3_cpuif_reginfo[] = {
 
 static void gicv3_cpuif_el_change_hook(ARMCPU *cpu, void *opaque)
 {
-    /* Do nothing for now. */
+    GICv3CPUState *cs = opaque;
+
+    gicv3_cpuif_update(cs);
 }
 
 void gicv3_init_cpuif(GICv3State *s)

hw/intc/gicv3_internal.h

@@ -222,10 +222,7 @@ void gicv3_init_cpuif(GICv3State *s);
  * current running priority or the CPU's current exception level or
  * security state.
  */
-static inline void gicv3_cpuif_update(GICv3CPUState *cs)
-{
-    /* This will be implemented in a later commit. */
-}
+void gicv3_cpuif_update(GICv3CPUState *cs);
 
 static inline uint32_t gicv3_iidr(void)
 {

trace-events

@@ -2181,6 +2181,8 @@ gicv3_icc_ctlr_read(uint32_t cpu, uint64_t val) "GICv3 ICC_CTLR read cpu %x valu
 gicv3_icc_ctlr_write(uint32_t cpu, uint64_t val) "GICv3 ICC_CTLR write cpu %x value 0x%" PRIx64
 gicv3_icc_ctlr_el3_read(uint32_t cpu, uint64_t val) "GICv3 ICC_CTLR_EL3 read cpu %x value 0x%" PRIx64
 gicv3_icc_ctlr_el3_write(uint32_t cpu, uint64_t val) "GICv3 ICC_CTLR_EL3 write cpu %x value 0x%" PRIx64
+gicv3_cpuif_update(uint32_t cpuid, int irq, int grp, int prio) "GICv3 CPU i/f %x HPPI update: irq %d group %d prio %d"
+gicv3_cpuif_set_irqs(uint32_t cpuid, int fiqlevel, int irqlevel) "GICv3 CPU i/f %x HPPI update: setting FIQ %d IRQ %d"
 
 # hw/intc/arm_gicv3_dist.c
 gicv3_dist_read(uint64_t offset, uint64_t data, unsigned size, bool secure) "GICv3 distributor read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u secure %d"