target-arm: Add HCR_EL2

Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1411718914-6608-2-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-arm/cpu.h

@@ -184,6 +184,7 @@ typedef struct CPUARMState {
                         MPU write buffer control.  */
         uint32_t pmsav5_data_ap; /* PMSAv5 MPU data access permissions */
         uint32_t pmsav5_insn_ap; /* PMSAv5 MPU insn access permissions */
+        uint64_t hcr_el2; /* Hypervisor configuration register */
         uint32_t ifsr_el2; /* Fault status registers.  */
         uint64_t esr_el[4];
         uint32_t c6_region[8]; /* MPU base/size registers.  */
@@ -566,6 +567,41 @@ static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask)
     }
 }
 
+#define HCR_VM        (1ULL << 0)
+#define HCR_SWIO      (1ULL << 1)
+#define HCR_PTW       (1ULL << 2)
+#define HCR_FMO       (1ULL << 3)
+#define HCR_IMO       (1ULL << 4)
+#define HCR_AMO       (1ULL << 5)
+#define HCR_VF        (1ULL << 6)
+#define HCR_VI        (1ULL << 7)
+#define HCR_VSE       (1ULL << 8)
+#define HCR_FB        (1ULL << 9)
+#define HCR_BSU_MASK  (3ULL << 10)
+#define HCR_DC        (1ULL << 12)
+#define HCR_TWI       (1ULL << 13)
+#define HCR_TWE       (1ULL << 14)
+#define HCR_TID0      (1ULL << 15)
+#define HCR_TID1      (1ULL << 16)
+#define HCR_TID2      (1ULL << 17)
+#define HCR_TID3      (1ULL << 18)
+#define HCR_TSC       (1ULL << 19)
+#define HCR_TIDCP     (1ULL << 20)
+#define HCR_TACR      (1ULL << 21)
+#define HCR_TSW       (1ULL << 22)
+#define HCR_TPC       (1ULL << 23)
+#define HCR_TPU       (1ULL << 24)
+#define HCR_TTLB      (1ULL << 25)
+#define HCR_TVM       (1ULL << 26)
+#define HCR_TGE       (1ULL << 27)
+#define HCR_TDZ       (1ULL << 28)
+#define HCR_HCD       (1ULL << 29)
+#define HCR_TRVM      (1ULL << 30)
+#define HCR_RW        (1ULL << 31)
+#define HCR_CD        (1ULL << 32)
+#define HCR_ID        (1ULL << 33)
+#define HCR_MASK      ((1ULL << 34) - 1)
+
 /* Return the current FPSCR value.  */
 uint32_t vfp_get_fpscr(CPUARMState *env);
 void vfp_set_fpscr(CPUARMState *env, uint32_t val);

target-arm/helper.c

@@ -2225,10 +2225,44 @@ static const ARMCPRegInfo v8_el3_no_el2_cp_reginfo[] = {
       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 0,
       .access = PL2_RW,
       .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore },
+    { .name = "HCR_EL2", .state = ARM_CP_STATE_AA64,
+      .type = ARM_CP_NO_MIGRATE,
+      .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0,
+      .access = PL2_RW,
+      .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore },
     REGINFO_SENTINEL
 };
 
+static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
+{
+    ARMCPU *cpu = arm_env_get_cpu(env);
+    uint64_t valid_mask = HCR_MASK;
+
+    if (arm_feature(env, ARM_FEATURE_EL3)) {
+        valid_mask &= ~HCR_HCD;
+    } else {
+        valid_mask &= ~HCR_TSC;
+    }
+
+    /* Clear RES0 bits.  */
+    value &= valid_mask;
+
+    /* These bits change the MMU setup:
+     * HCR_VM enables stage 2 translation
+     * HCR_PTW forbids certain page-table setups
+     * HCR_DC Disables stage1 and enables stage2 translation
+     */
+    if ((raw_read(env, ri) ^ value) & (HCR_VM | HCR_PTW | HCR_DC)) {
+        tlb_flush(CPU(cpu), 1);
+    }
+    raw_write(env, ri, value);
+}
+
 static const ARMCPRegInfo v8_el2_cp_reginfo[] = {
+    { .name = "HCR_EL2", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0,
+      .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.hcr_el2),
+      .writefn = hcr_write },
     { .name = "ELR_EL2", .state = ARM_CP_STATE_AA64,
       .type = ARM_CP_NO_MIGRATE,
       .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 0, .opc2 = 1,