Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20160627' into staging

target-arm queue:
 * arm_gicv3: add missing 'break' statements
 * cadence_uart: protect against transmit errors
 * cadence_gem: avoid infinite loops with misconfigured buffer
 * cadence_gem: set the 'last' bit when 'wrap' is set
 * reenable tmp105 test case
 * palmetto-bmc: add ASPEED system control unit model
 * m25p80: add new 512Mbit and 1Gbit devices

# gpg: Signature made Mon 27 Jun 2016 15:43:42 BST
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20160627:
  m25p80: Fix WINBOND fast read command handling
  m25p80: New flash devices.
  m25p80: Fast read commands family changes.
  m25p80: Introduce configuration registers.
  m25p80: Introduce quad and equad modes.
  m25p80: Add additional flash commands:
  m25p80: Introduce COLLECTING_VAR_LEN_DATA state.
  m25p80: Allow more than four banks.
  m25p80: Make a table for JEDEC ID.
  m25p80: Replace JEDEC ID masking with function.
  palmetto-bmc: Configure the SCU's hardware strapping register
  ast2400: Integrate the SCU model and set silicon revision
  hw/misc: Add a model for the ASPEED System Control Unit
  arm: Re-enable tmp105 test
  cadence_gem: Set the last bit when wrap is set
  cadence_gem: Avoid infinite loops with a misconfigured buffer
  cadence_uart: Protect against transmit errors
  hw/intc/arm_gicv3: Add missing break
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

hw/arm/ast2400.c

@@ -24,9 +24,12 @@
 #define AST2400_IOMEM_SIZE       0x00200000
 #define AST2400_IOMEM_BASE       0x1E600000
 #define AST2400_VIC_BASE         0x1E6C0000
+#define AST2400_SCU_BASE         0x1E6E2000
 #define AST2400_TIMER_BASE       0x1E782000
 #define AST2400_I2C_BASE         0x1E78A000
 
+#define AST2400_A0_SILICON_REV   0x02000303
+
 static const int uart_irqs[] = { 9, 32, 33, 34, 10 };
 static const int timer_irqs[] = { 16, 17, 18, 35, 36, 37, 38, 39, };
 
@@ -72,6 +75,16 @@ static void ast2400_init(Object *obj)
     object_initialize(&s->i2c, sizeof(s->i2c), TYPE_ASPEED_I2C);
     object_property_add_child(obj, "i2c", OBJECT(&s->i2c), NULL);
     qdev_set_parent_bus(DEVICE(&s->i2c), sysbus_get_default());
+
+    object_initialize(&s->scu, sizeof(s->scu), TYPE_ASPEED_SCU);
+    object_property_add_child(obj, "scu", OBJECT(&s->scu), NULL);
+    qdev_set_parent_bus(DEVICE(&s->scu), sysbus_get_default());
+    qdev_prop_set_uint32(DEVICE(&s->scu), "silicon-rev",
+                         AST2400_A0_SILICON_REV);
+    object_property_add_alias(obj, "hw-strap1", OBJECT(&s->scu),
+                              "hw-strap1", &error_abort);
+    object_property_add_alias(obj, "hw-strap2", OBJECT(&s->scu),
+                              "hw-strap2", &error_abort);
 }
 
 static void ast2400_realize(DeviceState *dev, Error **errp)
@@ -110,6 +123,14 @@ static void ast2400_realize(DeviceState *dev, Error **errp)
         sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq);
     }
 
+    /* SCU */
+    object_property_set_bool(OBJECT(&s->scu), true, "realized", &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->scu), 0, AST2400_SCU_BASE);
+
     /* UART - attach an 8250 to the IO space as our UART5 */
     if (serial_hds[0]) {
         qemu_irq uart5 = qdev_get_gpio_in(DEVICE(&s->vic), uart_irqs[4]);

hw/arm/palmetto-bmc.c

@@ -44,6 +44,8 @@ static void palmetto_bmc_init(MachineState *machine)
                                 &bmc->ram);
     object_property_add_const_link(OBJECT(&bmc->soc), "ram", OBJECT(&bmc->ram),
                                    &error_abort);
+    object_property_set_int(OBJECT(&bmc->soc), 0x120CE416, "hw-strap1",
+                            &error_abort);
     object_property_set_bool(OBJECT(&bmc->soc), true, "realized",
                              &error_abort);
 

hw/char/cadence_uart.c

@@ -288,8 +288,11 @@ static gboolean cadence_uart_xmit(GIOChannel *chan, GIOCondition cond,
     }
 
     ret = qemu_chr_fe_write(s->chr, s->tx_fifo, s->tx_count);
-    s->tx_count -= ret;
-    memmove(s->tx_fifo, s->tx_fifo + ret, s->tx_count);
+
+    if (ret >= 0) {
+        s->tx_count -= ret;
+        memmove(s->tx_fifo, s->tx_fifo + ret, s->tx_count);
+    }
 
     if (s->tx_count) {
         int r = qemu_chr_fe_add_watch(s->chr, G_IO_OUT|G_IO_HUP,

hw/intc/arm_gicv3_cpuif.c

@@ -975,6 +975,7 @@ static CPAccessResult gicv3_irqfiq_access(CPUARMState *env,
             if (!is_a64(env) && !arm_is_el3_or_mon(env)) {
                 r = CP_ACCESS_TRAP_EL3;
             }
+            break;
         default:
             g_assert_not_reached();
         }
@@ -1006,6 +1007,7 @@ static CPAccessResult gicv3_fiq_access(CPUARMState *env,
             if (!is_a64(env) && !arm_is_el3_or_mon(env)) {
                 r = CP_ACCESS_TRAP_EL3;
             }
+            break;
         default:
             g_assert_not_reached();
         }

hw/misc/Makefile.objs

@@ -52,3 +52,4 @@ obj-$(CONFIG_PVPANIC) += pvpanic.o
 obj-$(CONFIG_EDU) += edu.o
 obj-$(CONFIG_HYPERV_TESTDEV) += hyperv_testdev.o
 obj-$(CONFIG_AUX) += aux.o
+obj-$(CONFIG_ASPEED_SOC) += aspeed_scu.o

hw/misc/aspeed_scu.c

+/*
+ * ASPEED System Control Unit
+ *
+ * Andrew Jeffery <andrew@aj.id.au>
+ *
+ * Copyright 2016 IBM Corp.
+ *
+ * This code is licensed under the GPL version 2 or later.  See
+ * the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/misc/aspeed_scu.h"
+#include "hw/qdev-properties.h"
+#include "qapi/error.h"
+#include "qapi/visitor.h"
+#include "qemu/bitops.h"
+#include "trace.h"
+
+#define TO_REG(offset) ((offset) >> 2)
+
+#define PROT_KEY             TO_REG(0x00)
+#define SYS_RST_CTRL         TO_REG(0x04)
+#define CLK_SEL              TO_REG(0x08)
+#define CLK_STOP_CTRL        TO_REG(0x0C)
+#define FREQ_CNTR_CTRL       TO_REG(0x10)
+#define FREQ_CNTR_EVAL       TO_REG(0x14)
+#define IRQ_CTRL             TO_REG(0x18)
+#define D2PLL_PARAM          TO_REG(0x1C)
+#define MPLL_PARAM           TO_REG(0x20)
+#define HPLL_PARAM           TO_REG(0x24)
+#define FREQ_CNTR_RANGE      TO_REG(0x28)
+#define MISC_CTRL1           TO_REG(0x2C)
+#define PCI_CTRL1            TO_REG(0x30)
+#define PCI_CTRL2            TO_REG(0x34)
+#define PCI_CTRL3            TO_REG(0x38)
+#define SYS_RST_STATUS       TO_REG(0x3C)
+#define SOC_SCRATCH1         TO_REG(0x40)
+#define SOC_SCRATCH2         TO_REG(0x44)
+#define MAC_CLK_DELAY        TO_REG(0x48)
+#define MISC_CTRL2           TO_REG(0x4C)
+#define VGA_SCRATCH1         TO_REG(0x50)
+#define VGA_SCRATCH2         TO_REG(0x54)
+#define VGA_SCRATCH3         TO_REG(0x58)
+#define VGA_SCRATCH4         TO_REG(0x5C)
+#define VGA_SCRATCH5         TO_REG(0x60)
+#define VGA_SCRATCH6         TO_REG(0x64)
+#define VGA_SCRATCH7         TO_REG(0x68)
+#define VGA_SCRATCH8         TO_REG(0x6C)
+#define HW_STRAP1            TO_REG(0x70)
+#define RNG_CTRL             TO_REG(0x74)
+#define RNG_DATA             TO_REG(0x78)
+#define SILICON_REV          TO_REG(0x7C)
+#define PINMUX_CTRL1         TO_REG(0x80)
+#define PINMUX_CTRL2         TO_REG(0x84)
+#define PINMUX_CTRL3         TO_REG(0x88)
+#define PINMUX_CTRL4         TO_REG(0x8C)
+#define PINMUX_CTRL5         TO_REG(0x90)
+#define PINMUX_CTRL6         TO_REG(0x94)
+#define WDT_RST_CTRL         TO_REG(0x9C)
+#define PINMUX_CTRL7         TO_REG(0xA0)
+#define PINMUX_CTRL8         TO_REG(0xA4)
+#define PINMUX_CTRL9         TO_REG(0xA8)
+#define WAKEUP_EN            TO_REG(0xC0)
+#define WAKEUP_CTRL          TO_REG(0xC4)
+#define HW_STRAP2            TO_REG(0xD0)
+#define FREE_CNTR4           TO_REG(0xE0)
+#define FREE_CNTR4_EXT       TO_REG(0xE4)
+#define CPU2_CTRL            TO_REG(0x100)
+#define CPU2_BASE_SEG1       TO_REG(0x104)
+#define CPU2_BASE_SEG2       TO_REG(0x108)
+#define CPU2_BASE_SEG3       TO_REG(0x10C)
+#define CPU2_BASE_SEG4       TO_REG(0x110)
+#define CPU2_BASE_SEG5       TO_REG(0x114)
+#define CPU2_CACHE_CTRL      TO_REG(0x118)
+#define UART_HPLL_CLK        TO_REG(0x160)
+#define PCIE_CTRL            TO_REG(0x180)
+#define BMC_MMIO_CTRL        TO_REG(0x184)
+#define RELOC_DECODE_BASE1   TO_REG(0x188)
+#define RELOC_DECODE_BASE2   TO_REG(0x18C)
+#define MAILBOX_DECODE_BASE  TO_REG(0x190)
+#define SRAM_DECODE_BASE1    TO_REG(0x194)
+#define SRAM_DECODE_BASE2    TO_REG(0x198)
+#define BMC_REV              TO_REG(0x19C)
+#define BMC_DEV_ID           TO_REG(0x1A4)
+
+#define PROT_KEY_UNLOCK 0x1688A8A8
+#define SCU_IO_REGION_SIZE 0x20000
+
+#define AST2400_A0_SILICON_REV     0x02000303U
+
+static const uint32_t ast2400_a0_resets[ASPEED_SCU_NR_REGS] = {
+     [SYS_RST_CTRL]    = 0xFFCFFEDCU,
+     [CLK_SEL]         = 0xF3F40000U,
+     [CLK_STOP_CTRL]   = 0x19FC3E8BU,
+     [D2PLL_PARAM]     = 0x00026108U,
+     [MPLL_PARAM]      = 0x00030291U,
+     [HPLL_PARAM]      = 0x00000291U,
+     [MISC_CTRL1]      = 0x00000010U,
+     [PCI_CTRL1]       = 0x20001A03U,
+     [PCI_CTRL2]       = 0x20001A03U,
+     [PCI_CTRL3]       = 0x04000030U,
+     [SYS_RST_STATUS]  = 0x00000001U,
+     [SOC_SCRATCH1]    = 0x000000C0U, /* SoC completed DRAM init */
+     [MISC_CTRL2]      = 0x00000023U,
+     [RNG_CTRL]        = 0x0000000EU,
+     [PINMUX_CTRL2]    = 0x0000F000U,
+     [PINMUX_CTRL3]    = 0x01000000U,
+     [PINMUX_CTRL4]    = 0x000000FFU,
+     [PINMUX_CTRL5]    = 0x0000A000U,
+     [WDT_RST_CTRL]    = 0x003FFFF3U,
+     [PINMUX_CTRL8]    = 0xFFFF0000U,
+     [PINMUX_CTRL9]    = 0x000FFFFFU,
+     [FREE_CNTR4]      = 0x000000FFU,
+     [FREE_CNTR4_EXT]  = 0x000000FFU,
+     [CPU2_BASE_SEG1]  = 0x80000000U,
+     [CPU2_BASE_SEG4]  = 0x1E600000U,
+     [CPU2_BASE_SEG5]  = 0xC0000000U,
+     [UART_HPLL_CLK]   = 0x00001903U,
+     [PCIE_CTRL]       = 0x0000007BU,
+     [BMC_DEV_ID]      = 0x00002402U
+};
+
+static uint64_t aspeed_scu_read(void *opaque, hwaddr offset, unsigned size)
+{
+    AspeedSCUState *s = ASPEED_SCU(opaque);
+    int reg = TO_REG(offset);
+
+    if (reg >= ARRAY_SIZE(s->regs)) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+        return 0;
+    }
+
+    switch (reg) {
+    case WAKEUP_EN:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Read of write-only offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+        break;
+    }
+
+    return s->regs[reg];
+}
+
+static void aspeed_scu_write(void *opaque, hwaddr offset, uint64_t data,
+                             unsigned size)
+{
+    AspeedSCUState *s = ASPEED_SCU(opaque);
+    int reg = TO_REG(offset);
+
+    if (reg >= ARRAY_SIZE(s->regs)) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+        return;
+    }
+
+    if (reg > PROT_KEY && reg < CPU2_BASE_SEG1 &&
+            s->regs[PROT_KEY] != PROT_KEY_UNLOCK) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__);
+        return;
+    }
+
+    trace_aspeed_scu_write(offset, size, data);
+
+    switch (reg) {
+    case FREQ_CNTR_EVAL:
+    case VGA_SCRATCH1 ... VGA_SCRATCH8:
+    case RNG_DATA:
+    case SILICON_REV:
+    case FREE_CNTR4:
+    case FREE_CNTR4_EXT:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Write to read-only offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+        return;
+    }
+
+    s->regs[reg] = data;
+}
+
+static const MemoryRegionOps aspeed_scu_ops = {
+    .read = aspeed_scu_read,
+    .write = aspeed_scu_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid.min_access_size = 4,
+    .valid.max_access_size = 4,
+    .valid.unaligned = false,
+};
+
+static void aspeed_scu_reset(DeviceState *dev)
+{
+    AspeedSCUState *s = ASPEED_SCU(dev);
+    const uint32_t *reset;
+
+    switch (s->silicon_rev) {
+    case AST2400_A0_SILICON_REV:
+        reset = ast2400_a0_resets;
+        break;
+    default:
+        g_assert_not_reached();
+    }
+
+    memcpy(s->regs, reset, sizeof(s->regs));
+    s->regs[SILICON_REV] = s->silicon_rev;
+    s->regs[HW_STRAP1] = s->hw_strap1;
+    s->regs[HW_STRAP2] = s->hw_strap2;
+}
+
+static uint32_t aspeed_silicon_revs[] = { AST2400_A0_SILICON_REV, };
+
+static bool is_supported_silicon_rev(uint32_t silicon_rev)
+{
+    int i;
+
+    for (i = 0; i < ARRAY_SIZE(aspeed_silicon_revs); i++) {
+        if (silicon_rev == aspeed_silicon_revs[i]) {
+            return true;
+        }
+    }
+
+    return false;
+}
+
+static void aspeed_scu_realize(DeviceState *dev, Error **errp)
+{
+    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+    AspeedSCUState *s = ASPEED_SCU(dev);
+
+    if (!is_supported_silicon_rev(s->silicon_rev)) {
+        error_setg(errp, "Unknown silicon revision: 0x%" PRIx32,
+                s->silicon_rev);
+        return;
+    }
+
+    memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_scu_ops, s,
+                          TYPE_ASPEED_SCU, SCU_IO_REGION_SIZE);
+
+    sysbus_init_mmio(sbd, &s->iomem);
+}
+
+static const VMStateDescription vmstate_aspeed_scu = {
+    .name = "aspeed.scu",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32_ARRAY(regs, AspeedSCUState, ASPEED_SCU_NR_REGS),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static Property aspeed_scu_properties[] = {
+    DEFINE_PROP_UINT32("silicon-rev", AspeedSCUState, silicon_rev, 0),
+    DEFINE_PROP_UINT32("hw-strap1", AspeedSCUState, hw_strap1, 0),
+    DEFINE_PROP_UINT32("hw-strap2", AspeedSCUState, hw_strap1, 0),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void aspeed_scu_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    dc->realize = aspeed_scu_realize;
+    dc->reset = aspeed_scu_reset;
+    dc->desc = "ASPEED System Control Unit";
+    dc->vmsd = &vmstate_aspeed_scu;
+    dc->props = aspeed_scu_properties;
+}
+
+static const TypeInfo aspeed_scu_info = {
+    .name = TYPE_ASPEED_SCU,
+    .parent = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(AspeedSCUState),
+    .class_init = aspeed_scu_class_init,
+};
+
+static void aspeed_scu_register_types(void)
+{
+    type_register_static(&aspeed_scu_info);
+}
+
+type_init(aspeed_scu_register_types);

hw/misc/trace-events

@@ -50,3 +50,6 @@ milkymist_pfpu_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
 milkymist_pfpu_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
 milkymist_pfpu_vectout(uint32_t a, uint32_t b, uint32_t dma_ptr) "a %08x b %08x dma_ptr %08x"
 milkymist_pfpu_pulse_irq(void) "Pulse IRQ"
+
+# hw/misc/aspeed_scu.c
+aspeed_scu_write(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32

hw/net/cadence_gem.c

@@ -274,6 +274,11 @@ static inline unsigned tx_desc_get_last(unsigned *desc)
     return (desc[1] & DESC_1_TX_LAST) ? 1 : 0;
 }
 
+static inline void tx_desc_set_last(unsigned *desc)
+{
+    desc[1] |= DESC_1_TX_LAST;
+}
+
 static inline unsigned tx_desc_get_length(unsigned *desc)
 {
     return desc[1] & DESC_1_LENGTH;
@@ -664,6 +669,13 @@ static ssize_t gem_receive(NetClientState *nc, const uint8_t *buf, size_t size)
                  GEM_DMACFG_RBUFSZ_S) * GEM_DMACFG_RBUFSZ_MUL;
     bytes_to_copy = size;
 
+    /* Hardware allows a zero value here but warns against it. To avoid QEMU
+     * indefinite loops we enforce a minimum value here
+     */
+    if (rxbufsize < GEM_DMACFG_RBUFSZ_MUL) {
+        rxbufsize = GEM_DMACFG_RBUFSZ_MUL;
+    }
+
     /* Pad to minimum length. Assume FCS field is stripped, logic
      * below will increment it to the real minimum of 64 when
      * not FCS stripping
@@ -932,6 +944,7 @@ static void gem_transmit(CadenceGEMState *s)
 
         /* read next descriptor */
         if (tx_desc_get_wrap(desc)) {
+            tx_desc_set_last(desc);
             packet_desc_addr = s->regs[GEM_TXQBASE];
         } else {
             packet_desc_addr += 8;

include/hw/arm/ast2400.h

@@ -14,6 +14,7 @@
 
 #include "hw/arm/arm.h"
 #include "hw/intc/aspeed_vic.h"
+#include "hw/misc/aspeed_scu.h"
 #include "hw/timer/aspeed_timer.h"
 #include "hw/i2c/aspeed_i2c.h"
 
@@ -27,6 +28,7 @@ typedef struct AST2400State {
     AspeedVICState vic;
     AspeedTimerCtrlState timerctrl;
     AspeedI2CState i2c;
+    AspeedSCUState scu;
 } AST2400State;
 
 #define TYPE_AST2400 "ast2400"

include/hw/misc/aspeed_scu.h

+/*
+ * ASPEED System Control Unit
+ *
+ * Andrew Jeffery <andrew@aj.id.au>
+ *
+ * Copyright 2016 IBM Corp.
+ *
+ * This code is licensed under the GPL version 2 or later.  See
+ * the COPYING file in the top-level directory.
+ */
+#ifndef ASPEED_SCU_H
+#define ASPEED_SCU_H
+
+#include "hw/sysbus.h"
+
+#define TYPE_ASPEED_SCU "aspeed.scu"
+#define ASPEED_SCU(obj) OBJECT_CHECK(AspeedSCUState, (obj), TYPE_ASPEED_SCU)
+
+#define ASPEED_SCU_NR_REGS (0x1A8 >> 2)
+
+typedef struct AspeedSCUState {
+    /*< private >*/
+    SysBusDevice parent_obj;
+
+    /*< public >*/
+    MemoryRegion iomem;
+
+    uint32_t regs[ASPEED_SCU_NR_REGS];
+    uint32_t silicon_rev;
+    uint32_t hw_strap1;
+    uint32_t hw_strap2;
+} AspeedSCUState;
+
+#endif /* ASPEED_SCU_H */

tests/Makefile.include

@@ -251,7 +251,7 @@ check-qtest-sparc64-y = tests/endianness-test$(EXESUF)
 gcov-files-sparc-y += hw/timer/m48t59.c
 gcov-files-sparc64-y += hw/timer/m48t59.c
 check-qtest-arm-y = tests/tmp105-test$(EXESUF)
-check-qtest-arm-y = tests/ds1338-test$(EXESUF)
+check-qtest-arm-y += tests/ds1338-test$(EXESUF)
 gcov-files-arm-y += hw/misc/tmp105.c
 check-qtest-arm-y += tests/virtio-blk-test$(EXESUF)
 gcov-files-arm-y += arm-softmmu/hw/block/virtio-blk.c