Second half of mipssim support, plus documentation improvements.

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3401 c046a42c-6fe2-441c-8c8c-71466251a162

hw/mips_mipssim.c

+/*
+ * QEMU/mipssim emulation
+ *
+ * Emulates a very simple machine model similiar to the one use by the
+ * proprietary MIPS emulator.
+ */
+#include "vl.h"
+
+#ifdef TARGET_WORDS_BIGENDIAN
+#define BIOS_FILENAME "mips_bios.bin"
+#else
+#define BIOS_FILENAME "mipsel_bios.bin"
+#endif
+
+#ifdef TARGET_MIPS64
+#define PHYS_TO_VIRT(x) ((x) | ~0x7fffffffULL)
+#else
+#define PHYS_TO_VIRT(x) ((x) | ~0x7fffffffU)
+#endif
+
+#define VIRT_TO_PHYS_ADDEND (-((int64_t)(int32_t)0x80000000))
+
+static void load_kernel (CPUState *env)
+{
+    int64_t entry, kernel_low, kernel_high;
+    long kernel_size;
+    long initrd_size;
+    ram_addr_t initrd_offset;
+
+    kernel_size = load_elf(env->kernel_filename, VIRT_TO_PHYS_ADDEND,
+                           &entry, &kernel_low, &kernel_high);
+    if (kernel_size >= 0) {
+        if ((entry & ~0x7fffffffULL) == 0x80000000)
+            entry = (int32_t)entry;
+        env->PC[env->current_tc] = entry;
+    } else {
+        fprintf(stderr, "qemu: could not load kernel '%s'\n",
+                env->kernel_filename);
+        exit(1);
+    }
+
+    /* load initrd */
+    initrd_size = 0;
+    initrd_offset = 0;
+    if (env->initrd_filename) {
+        initrd_size = get_image_size (env->initrd_filename);
+        if (initrd_size > 0) {
+            initrd_offset = (kernel_high + ~TARGET_PAGE_MASK) & TARGET_PAGE_MASK;
+            if (initrd_offset + initrd_size > env->ram_size) {
+                fprintf(stderr,
+                        "qemu: memory too small for initial ram disk '%s'\n",
+                        env->initrd_filename);
+                exit(1);
+            }
+            initrd_size = load_image(env->initrd_filename,
+                                     phys_ram_base + initrd_offset);
+        }
+        if (initrd_size == (target_ulong) -1) {
+            fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
+                    env->initrd_filename);
+            exit(1);
+        }
+    }
+}
+
+static void main_cpu_reset(void *opaque)
+{
+    CPUState *env = opaque;
+    cpu_reset(env);
+    cpu_mips_register(env, NULL);
+
+    if (env->kernel_filename)
+        load_kernel (env);
+}
+
+static void
+mips_mipssim_init (int ram_size, int vga_ram_size, int boot_device,
+                   DisplayState *ds, const char **fd_filename, int snapshot,
+                   const char *kernel_filename, const char *kernel_cmdline,
+                   const char *initrd_filename, const char *cpu_model)
+{
+    char buf[1024];
+    unsigned long bios_offset;
+    CPUState *env;
+    int ret;
+    mips_def_t *def;
+
+    /* Init CPUs. */
+    if (cpu_model == NULL) {
+#ifdef TARGET_MIPS64
+        cpu_model = "5Kf";
+#else
+        cpu_model = "24Kf";
+#endif
+    }
+    if (mips_find_by_name(cpu_model, &def) != 0)
+        def = NULL;
+    env = cpu_init();
+    cpu_mips_register(env, def);
+    register_savevm("cpu", 0, 3, cpu_save, cpu_load, env);
+    qemu_register_reset(main_cpu_reset, env);
+
+    /* Allocate RAM. */
+    cpu_register_physical_memory(0, ram_size, IO_MEM_RAM);
+
+    /* Map the BIOS / boot exception handler. */
+    bios_offset = ram_size + vga_ram_size;
+
+    /* Load a BIOS / boot exception handler image. */
+    if (bios_name == NULL)
+        bios_name = BIOS_FILENAME;
+    snprintf(buf, sizeof(buf), "%s/%s", bios_dir, bios_name);
+    ret = load_image(buf, phys_ram_base + bios_offset);
+    if ((ret < 0 || ret > BIOS_SIZE) && !kernel_filename) {
+        /* Bail out if we have neither a kernel image nor boot vector code. */
+        fprintf(stderr,
+                "qemu: Could not load MIPS bios '%s', and no -kernel argument was specified\n",
+                buf);
+        exit(1);
+    } else {
+        /* We have a boot vector start address. */
+        env->PC[env->current_tc] = (target_long)0xbfc00000;
+        cpu_register_physical_memory(0x1fc00000LL,
+                                     ret, bios_offset | IO_MEM_ROM);
+    }
+
+    if (kernel_filename) {
+        env->ram_size = ram_size;
+        env->kernel_filename = kernel_filename;
+        env->kernel_cmdline = kernel_cmdline;
+        env->initrd_filename = initrd_filename;
+        load_kernel(env);
+    }
+
+    /* Init CPU internal devices. */
+    cpu_mips_irq_init_cpu(env);
+    cpu_mips_clock_init(env);
+    cpu_mips_irqctrl_init();
+
+    /* Register 64 KB of ISA IO space at 0x1fd00000. */
+    isa_mmio_init(0x1fd00000, 0x00010000);
+
+    /* A single 16450 sits at offset 0x3f8. It is attached to
+       MIPS CPU INT2, which is interrupt 4. */
+    if (serial_hds[0])
+        serial_init(0x3f8, env->irq[4], serial_hds[0]);
+
+    if (nd_table[0].vlan) {
+        if (nd_table[0].model == NULL
+            || strcmp(nd_table[0].model, "mipsnet") == 0) {
+            /* MIPSnet uses the MIPS CPU INT0, which is interrupt 2. */
+            mipsnet_init(0x4200, env->irq[2], &nd_table[0]);
+        } else if (strcmp(nd_table[0].model, "?") == 0) {
+            fprintf(stderr, "qemu: Supported NICs: mipsnet\n");
+            exit (1);
+        } else {
+            fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd_table[0].model);
+            exit (1);
+        }
+    }
+}
+
+QEMUMachine mips_mipssim_machine = {
+    "mipssim",
+    "MIPS MIPSsim platform",
+    mips_mipssim_init,
+};

hw/mipsnet.c

+#include "vl.h"
+
+#define DEBUG_MIPSNET_SEND
+#define DEBUG_MIPSNET_RECEIVE
+//#define DEBUG_MIPSNET_DATA
+#define DEBUG_MIPSNET_IRQ
+
+/* MIPSnet register offsets */
+
+#define MIPSNET_DEV_ID		0x00
+# define MIPSNET_DEV_ID_STRING	"MIPSNET0"
+#define MIPSNET_BUSY		0x08
+#define MIPSNET_RX_DATA_COUNT	0x0c
+#define MIPSNET_TX_DATA_COUNT	0x10
+#define MIPSNET_INT_CTL		0x14
+# define MIPSNET_INTCTL_TXDONE		0x00000001
+# define MIPSNET_INTCTL_RXDONE		0x00000002
+# define MIPSNET_INTCTL_TESTBIT		0x80000000
+#define MIPSNET_INTERRUPT_INFO	0x18
+#define MIPSNET_RX_DATA_BUFFER	0x1c
+#define MIPSNET_TX_DATA_BUFFER	0x20
+
+#define MAX_ETH_FRAME_SIZE	1514
+
+typedef struct MIPSnetState {
+    uint32_t busy;
+    uint32_t rx_count;
+    uint32_t rx_read;
+    uint32_t tx_count;
+    uint32_t tx_written;
+    uint32_t intctl;
+    uint8_t rx_buffer[MAX_ETH_FRAME_SIZE];
+    uint8_t tx_buffer[MAX_ETH_FRAME_SIZE];
+    qemu_irq irq;
+    VLANClientState *vc;
+    NICInfo *nd;
+} MIPSnetState;
+
+static void mipsnet_reset(MIPSnetState *s)
+{
+    s->busy = 1;
+    s->rx_count = 0;
+    s->rx_read = 0;
+    s->tx_count = 0;
+    s->tx_written = 0;
+    s->intctl = 0;
+    memset(s->rx_buffer, 0, MAX_ETH_FRAME_SIZE);
+    memset(s->tx_buffer, 0, MAX_ETH_FRAME_SIZE);
+}
+
+static void mipsnet_update_irq(MIPSnetState *s)
+{
+    int isr = !!s->intctl;
+#ifdef DEBUG_MIPSNET_IRQ
+    printf("mipsnet: Set IRQ to %d (%02x)\n", isr, s->intctl);
+#endif
+    qemu_set_irq(s->irq, isr);
+}
+
+static int mipsnet_buffer_full(MIPSnetState *s)
+{
+    if (s->rx_count >= MAX_ETH_FRAME_SIZE)
+        return 1;
+    return 0;
+}
+
+static int mipsnet_can_receive(void *opaque)
+{
+    MIPSnetState *s = opaque;
+
+    if (s->busy)
+        return 0;
+    return !mipsnet_buffer_full(s);
+}
+
+static void mipsnet_receive(void *opaque, const uint8_t *buf, int size)
+{
+    MIPSnetState *s = opaque;
+
+#ifdef DEBUG_MIPSNET_RECEIVE
+    printf("mipsnet: receiving len=%d\n", size);
+#endif
+    if (!mipsnet_can_receive(opaque))
+        return;
+
+    s->busy = 1;
+
+    /* Just accept everything. */
+
+    /* Write packet data. */
+    memcpy(s->rx_buffer, buf, size);
+
+    s->rx_count = size;
+    s->rx_read = 0;
+
+    /* Now we can signal we have received something. */
+    s->intctl |= MIPSNET_INTCTL_RXDONE;
+    mipsnet_update_irq(s);
+}
+
+static uint32_t mipsnet_ioport_read(void *opaque, uint32_t addr)
+{
+    MIPSnetState *s = opaque;
+    int ret = 0;
+    const char *devid = MIPSNET_DEV_ID_STRING;
+
+    addr &= 0x3f;
+    switch (addr) {
+    case MIPSNET_DEV_ID:
+	ret = *((uint32_t *)&devid);
+        break;
+    case MIPSNET_DEV_ID + 4:
+	ret = *((uint32_t *)(&devid + 4));
+        break;
+    case MIPSNET_BUSY:
+	ret = s->busy;
+        break;
+    case MIPSNET_RX_DATA_COUNT:
+	ret = s->rx_count;
+        break;
+    case MIPSNET_TX_DATA_COUNT:
+	ret = s->tx_count;
+        break;
+    case MIPSNET_INT_CTL:
+	ret = s->intctl;
+        s->intctl &= ~MIPSNET_INTCTL_TESTBIT;
+        break;
+    case MIPSNET_INTERRUPT_INFO:
+        /* XXX: This seems to be a per-VPE interrupt number. */
+	ret = 0;
+        break;
+    case MIPSNET_RX_DATA_BUFFER:
+        if (s->rx_count) {
+            s->rx_count--;
+            ret = s->rx_buffer[s->rx_read++];
+        }
+        break;
+    /* Reads as zero. */
+    case MIPSNET_TX_DATA_BUFFER:
+    default:
+        break;
+    }
+#ifdef DEBUG_MIPSNET_DATA
+    printf("mipsnet: read addr=0x%02x val=0x%02x\n", addr, ret);
+#endif
+    return ret;
+}
+
+static void mipsnet_ioport_write(void *opaque, uint32_t addr, uint32_t val)
+{
+    MIPSnetState *s = opaque;
+
+    addr &= 0x3f;
+#ifdef DEBUG_MIPSNET_DATA
+    printf("mipsnet: write addr=0x%02x val=0x%02x\n", addr, val);
+#endif
+    switch (addr) {
+    case MIPSNET_TX_DATA_COUNT:
+	s->tx_count = (val <= MAX_ETH_FRAME_SIZE) ? val : 0;
+        s->tx_written = 0;
+        break;
+    case MIPSNET_INT_CTL:
+        if (val & MIPSNET_INTCTL_TXDONE) {
+            s->intctl &= ~MIPSNET_INTCTL_TXDONE;
+        } else if (val & MIPSNET_INTCTL_RXDONE) {
+            s->intctl &= ~MIPSNET_INTCTL_RXDONE;
+        } else if (val & MIPSNET_INTCTL_TESTBIT) {
+            mipsnet_reset(s);
+            s->intctl |= MIPSNET_INTCTL_TESTBIT;
+        } else if (!val) {
+            /* ACK testbit interrupt, flag was cleared on read. */
+        }
+        s->busy = !!s->intctl;
+        mipsnet_update_irq(s);
+        break;
+    case MIPSNET_TX_DATA_BUFFER:
+        s->tx_buffer[s->tx_written++] = val;
+        if (s->tx_written == s->tx_count) {
+            /* Send buffer. */
+#ifdef DEBUG_MIPSNET_SEND
+            printf("mipsnet: sending len=%d\n", s->tx_count);
+#endif
+            qemu_send_packet(s->vc, s->tx_buffer, s->tx_count);
+            s->tx_count = s->tx_written = 0;
+            s->intctl |= MIPSNET_INTCTL_TXDONE;
+            s->busy = 1;
+            mipsnet_update_irq(s);
+        }
+        break;
+    /* Read-only registers */
+    case MIPSNET_DEV_ID:
+    case MIPSNET_BUSY:
+    case MIPSNET_RX_DATA_COUNT:
+    case MIPSNET_INTERRUPT_INFO:
+    case MIPSNET_RX_DATA_BUFFER:
+    default:
+        break;
+    }
+}
+
+static void mipsnet_save(QEMUFile *f, void *opaque)
+{
+    MIPSnetState *s = opaque;
+
+    qemu_put_be32s(f, &s->busy);
+    qemu_put_be32s(f, &s->rx_count);
+    qemu_put_be32s(f, &s->rx_read);
+    qemu_put_be32s(f, &s->tx_count);
+    qemu_put_be32s(f, &s->tx_written);
+    qemu_put_be32s(f, &s->intctl);
+    qemu_put_buffer(f, s->rx_buffer, MAX_ETH_FRAME_SIZE);
+    qemu_put_buffer(f, s->tx_buffer, MAX_ETH_FRAME_SIZE);
+}
+
+static int mipsnet_load(QEMUFile *f, void *opaque, int version_id)
+{
+    MIPSnetState *s = opaque;
+
+    if (version_id > 0)
+        return -EINVAL;
+
+    qemu_get_be32s(f, &s->busy);
+    qemu_get_be32s(f, &s->rx_count);
+    qemu_get_be32s(f, &s->rx_read);
+    qemu_get_be32s(f, &s->tx_count);
+    qemu_get_be32s(f, &s->tx_written);
+    qemu_get_be32s(f, &s->intctl);
+    qemu_get_buffer(f, s->rx_buffer, MAX_ETH_FRAME_SIZE);
+    qemu_get_buffer(f, s->tx_buffer, MAX_ETH_FRAME_SIZE);
+
+    return 0;
+}
+
+void mipsnet_init (int base, qemu_irq irq, NICInfo *nd)
+{
+    MIPSnetState *s;
+
+    s = qemu_mallocz(sizeof(MIPSnetState));
+    if (!s)
+        return;
+
+    register_ioport_write(base, 36, 1, mipsnet_ioport_write, s);
+    register_ioport_read(base, 36, 1, mipsnet_ioport_read, s);
+    register_ioport_write(base, 36, 2, mipsnet_ioport_write, s);
+    register_ioport_read(base, 36, 2, mipsnet_ioport_read, s);
+    register_ioport_write(base, 36, 4, mipsnet_ioport_write, s);
+    register_ioport_read(base, 36, 4, mipsnet_ioport_read, s);
+
+    s->irq = irq;
+    s->nd = nd;
+    if (nd && nd->vlan) {
+        s->vc = qemu_new_vlan_client(nd->vlan, mipsnet_receive,
+                                     mipsnet_can_receive, s);
+    } else {
+        s->vc = NULL;
+    }
+
+    snprintf(s->vc->info_str, sizeof(s->vc->info_str),
+             "mipsnet macaddr=%02x:%02x:%02x:%02x:%02x:%02x",
+              s->nd->macaddr[0],
+              s->nd->macaddr[1],
+              s->nd->macaddr[2],
+              s->nd->macaddr[3],
+              s->nd->macaddr[4],
+              s->nd->macaddr[5]);
+
+    mipsnet_reset(s);
+    register_savevm("mipsnet", 0, 0, mipsnet_save, mipsnet_load, s);
+}

qemu-doc.texi

@@ -2037,7 +2037,7 @@ The MIPS Malta prototype board "malta"
 @item
 An ACER Pica "pica61"
 @item
-MIPS MIPSsim emulator pseudo board "mipssim"
+MIPS emulator pseudo board "mipssim"
 @end itemize
 
 The generic emulation is supported by Debian 'Etch' and is able to
@@ -2085,7 +2085,9 @@ PC Keyboard
 IDE controller
 @end itemize
 
-The MIPSsim emulation supports:
+The mipssim pseudo board emulation provides an environment similiar
+to what the proprietary MIPS emulator uses for running Linux.
+It supports:
 
 @itemize @minus
 @item