提交 ed2997cd 编写于 作者: M Marc-André Lureau 提交者: malc

hw/ac97: remove USE_MIXER code

That code doesn't compile. The interesting bits for volume control are
going to be rewritten in the following patch.
Signed-off-by: NMarc-Andr? Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Nmalc <av1474@comtv.ru>
上级 c01b2456
......@@ -437,99 +437,6 @@ static void reset_voices (AC97LinkState *s, uint8_t active[LAST_INDEX])
AUD_set_active_in (s->voice_mc, active[MC_INDEX]);
}
#ifdef USE_MIXER
static void set_volume (AC97LinkState *s, int index,
audmixerctl_t mt, uint32_t val)
{
int mute = (val >> MUTE_SHIFT) & 1;
uint8_t rvol = VOL_MASK - (val & VOL_MASK);
uint8_t lvol = VOL_MASK - ((val >> 8) & VOL_MASK);
rvol = 255 * rvol / VOL_MASK;
lvol = 255 * lvol / VOL_MASK;
#ifdef SOFT_VOLUME
if (index == AC97_Master_Volume_Mute) {
AUD_set_volume_out (s->voice_po, mute, lvol, rvol);
}
else {
AUD_set_volume (mt, &mute, &lvol, &rvol);
}
#else
AUD_set_volume (mt, &mute, &lvol, &rvol);
#endif
rvol = VOL_MASK - ((VOL_MASK * rvol) / 255);
lvol = VOL_MASK - ((VOL_MASK * lvol) / 255);
mixer_store (s, index, val);
}
static audrecsource_t ac97_to_aud_record_source (uint8_t i)
{
switch (i) {
case REC_MIC:
return AUD_REC_MIC;
case REC_CD:
return AUD_REC_CD;
case REC_VIDEO:
return AUD_REC_VIDEO;
case REC_AUX:
return AUD_REC_AUX;
case REC_LINE_IN:
return AUD_REC_LINE_IN;
case REC_PHONE:
return AUD_REC_PHONE;
default:
dolog ("Unknown record source %d, using MIC\n", i);
return AUD_REC_MIC;
}
}
static uint8_t aud_to_ac97_record_source (audrecsource_t rs)
{
switch (rs) {
case AUD_REC_MIC:
return REC_MIC;
case AUD_REC_CD:
return REC_CD;
case AUD_REC_VIDEO:
return REC_VIDEO;
case AUD_REC_AUX:
return REC_AUX;
case AUD_REC_LINE_IN:
return REC_LINE_IN;
case AUD_REC_PHONE:
return REC_PHONE;
default:
dolog ("Unknown audio recording source %d using MIC\n", rs);
return REC_MIC;
}
}
static void record_select (AC97LinkState *s, uint32_t val)
{
uint8_t rs = val & REC_MASK;
uint8_t ls = (val >> 8) & REC_MASK;
audrecsource_t ars = ac97_to_aud_record_source (rs);
audrecsource_t als = ac97_to_aud_record_source (ls);
AUD_set_record_source (&als, &ars);
rs = aud_to_ac97_record_source (ars);
ls = aud_to_ac97_record_source (als);
mixer_store (s, AC97_Record_Select, rs | (ls << 8));
}
#endif
static void mixer_reset (AC97LinkState *s)
{
uint8_t active[LAST_INDEX];
......@@ -564,12 +471,6 @@ static void mixer_reset (AC97LinkState *s)
mixer_store (s, AC97_PCM_LR_ADC_Rate , 0xbb80);
mixer_store (s, AC97_MIC_ADC_Rate , 0xbb80);
#ifdef USE_MIXER
record_select (s, 0);
set_volume (s, AC97_Master_Volume_Mute, AUD_MIXER_VOLUME , 0x8000);
set_volume (s, AC97_PCM_Out_Volume_Mute, AUD_MIXER_PCM , 0x8808);
set_volume (s, AC97_Line_In_Volume_Mute, AUD_MIXER_LINE_IN, 0x8808);
#endif
reset_voices (s, active);
}
......@@ -628,20 +529,6 @@ static void nam_writew (void *opaque, uint32_t addr, uint32_t val)
val |= mixer_load (s, index) & 0xf;
mixer_store (s, index, val);
break;
#ifdef USE_MIXER
case AC97_Master_Volume_Mute:
set_volume (s, index, AUD_MIXER_VOLUME, val);
break;
case AC97_PCM_Out_Volume_Mute:
set_volume (s, index, AUD_MIXER_PCM, val);
break;
case AC97_Line_In_Volume_Mute:
set_volume (s, index, AUD_MIXER_LINE_IN, val);
break;
case AC97_Record_Select:
record_select (s, val);
break;
#endif
case AC97_Vendor_ID1:
case AC97_Vendor_ID2:
dolog ("Attempt to write vendor ID to %#x\n", val);
......@@ -1194,14 +1081,6 @@ static int ac97_post_load (void *opaque, int version_id)
uint8_t active[LAST_INDEX];
AC97LinkState *s = opaque;
#ifdef USE_MIXER
record_select (s, mixer_load (s, AC97_Record_Select));
#define V_(a, b) set_volume (s, a, b, mixer_load (s, a))
V_ (AC97_Master_Volume_Mute, AUD_MIXER_VOLUME);
V_ (AC97_PCM_Out_Volume_Mute, AUD_MIXER_PCM);
V_ (AC97_Line_In_Volume_Mute, AUD_MIXER_LINE_IN);
#undef V_
#endif
active[PI_INDEX] = !!(s->bm_regs[PI_INDEX].cr & CR_RPBM);
active[PO_INDEX] = !!(s->bm_regs[PO_INDEX].cr & CR_RPBM);
active[MC_INDEX] = !!(s->bm_regs[MC_INDEX].cr & CR_RPBM);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册