acpi, acpi_piix, vt82c686: factor out PM1_CNT logic

factor out ACPI PM1_CNT logic. This will be used by ich9 acpi.

Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Huacai Chen <zltjiangshi@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

hw/acpi.c

@@ -279,3 +279,52 @@ void acpi_pm_tmr_reset(ACPIPMTimer *tmr)
     tmr->overflow_time = 0;
     qemu_del_timer(tmr->timer);
 }
+
+/* ACPI PM1aCNT */
+void acpi_pm1_cnt_init(ACPIPM1CNT *pm1_cnt, qemu_irq cmos_s3)
+{
+    pm1_cnt->cmos_s3 = cmos_s3;
+}
+
+void acpi_pm1_cnt_write(ACPIPM1EVT *pm1a, ACPIPM1CNT *pm1_cnt, uint16_t val)
+{
+    pm1_cnt->cnt = val & ~(ACPI_BITMASK_SLEEP_ENABLE);
+
+    if (val & ACPI_BITMASK_SLEEP_ENABLE) {
+        /* change suspend type */
+        uint16_t sus_typ = (val >> 10) & 7;
+        switch(sus_typ) {
+        case 0: /* soft power off */
+            qemu_system_shutdown_request();
+            break;
+        case 1:
+            /* ACPI_BITMASK_WAKE_STATUS should be set on resume.
+               Pretend that resume was caused by power button */
+            pm1a->sts |=
+                (ACPI_BITMASK_WAKE_STATUS | ACPI_BITMASK_POWER_BUTTON_STATUS);
+            qemu_system_reset_request();
+            qemu_irq_raise(pm1_cnt->cmos_s3);
+        default:
+            break;
+        }
+    }
+}
+
+void acpi_pm1_cnt_update(ACPIPM1CNT *pm1_cnt,
+                         bool sci_enable, bool sci_disable)
+{
+    /* ACPI specs 3.0, 4.7.2.5 */
+    if (sci_enable) {
+        pm1_cnt->cnt |= ACPI_BITMASK_SCI_ENABLE;
+    } else if (sci_disable) {
+        pm1_cnt->cnt &= ~ACPI_BITMASK_SCI_ENABLE;
+    }
+}
+
+void acpi_pm1_cnt_reset(ACPIPM1CNT *pm1_cnt)
+{
+    pm1_cnt->cnt = 0;
+    if (pm1_cnt->cmos_s3) {
+        qemu_irq_lower(pm1_cnt->cmos_s3);
+    }
+}

hw/acpi.h

@@ -112,4 +112,18 @@ void acpi_pm1_evt_write_sts(ACPIPM1EVT *pm1, ACPIPMTimer *tmr, uint16_t val);
 void acpi_pm1_evt_power_down(ACPIPM1EVT *pm1, ACPIPMTimer *tmr);
 void acpi_pm1_evt_reset(ACPIPM1EVT *pm1);
 
+/* PM1a_CNT: piix and ich9 don't implement PM1b CNT. */
+struct ACPIPM1CNT {
+    uint16_t cnt;
+
+    qemu_irq cmos_s3;
+};
+typedef struct ACPIPM1CNT ACPIPM1CNT;
+
+void acpi_pm1_cnt_init(ACPIPM1CNT *pm1_cnt, qemu_irq cmos_s3);
+void acpi_pm1_cnt_write(ACPIPM1EVT *pm1a, ACPIPM1CNT *pm1_cnt, uint16_t val);
+void acpi_pm1_cnt_update(ACPIPM1CNT *pm1_cnt,
+                         bool sci_enable, bool sci_disable);
+void acpi_pm1_cnt_reset(ACPIPM1CNT *pm1_cnt);
+
 #endif /* !QEMU_HW_ACPI_H */

hw/acpi_piix4.c

@@ -55,7 +55,7 @@ typedef struct PIIX4PMState {
     PCIDevice dev;
     IORange ioport;
     ACPIPM1EVT pm1a;
-    uint16_t pmcntrl;
+    ACPIPM1CNT pm1_cnt;
 
     APMState apm;
 
@@ -65,7 +65,6 @@ typedef struct PIIX4PMState {
     uint32_t smb_io_base;
 
     qemu_irq irq;
-    qemu_irq cmos_s3;
     qemu_irq smi_irq;
     int kvm_enabled;
 
@@ -124,30 +123,7 @@ static void pm_ioport_write(IORange *ioport, uint64_t addr, unsigned width,
         pm_update_sci(s);
         break;
     case 0x04:
-        {
-            int sus_typ;
-            s->pmcntrl = val & ~(ACPI_BITMASK_SLEEP_ENABLE);
-            if (val & ACPI_BITMASK_SLEEP_ENABLE) {
-                /* change suspend type */
-                sus_typ = (val >> 10) & 7;
-                switch(sus_typ) {
-                case 0: /* soft power off */
-                    qemu_system_shutdown_request();
-                    break;
-                case 1:
-                    /* ACPI_BITMASK_WAKE_STATUS should be set on resume.
-                       Pretend that resume was caused by power button */
-                    s->pm1a.sts |= (ACPI_BITMASK_WAKE_STATUS |
-                                    ACPI_BITMASK_POWER_BUTTON_STATUS);
-                    qemu_system_reset_request();
-                    if (s->cmos_s3) {
-                        qemu_irq_raise(s->cmos_s3);
-                    }
-                default:
-                    break;
-                }
-            }
-        }
+        acpi_pm1_cnt_write(&s->pm1a, &s->pm1_cnt, val);
         break;
     default:
         break;
@@ -170,7 +146,7 @@ static void pm_ioport_read(IORange *ioport, uint64_t addr, unsigned width,
         val = s->pm1a.en;
         break;
     case 0x04:
-        val = s->pmcntrl;
+        val = s->pm1_cnt.cnt;
         break;
     case 0x08:
         val = acpi_pm_tmr_get(&s->tmr);
@@ -193,11 +169,7 @@ static void apm_ctrl_changed(uint32_t val, void *arg)
     PIIX4PMState *s = arg;
 
     /* ACPI specs 3.0, 4.7.2.5 */
-    if (val == ACPI_ENABLE) {
-        s->pmcntrl |= ACPI_BITMASK_SCI_ENABLE;
-    } else if (val == ACPI_DISABLE) {
-        s->pmcntrl &= ~ACPI_BITMASK_SCI_ENABLE;
-    }
+    acpi_pm1_cnt_update(&s->pm1_cnt, val == ACPI_ENABLE, val == ACPI_DISABLE);
 
     if (s->dev.config[0x5b] & (1 << 1)) {
         if (s->smi_irq) {
@@ -276,7 +248,7 @@ static const VMStateDescription vmstate_acpi = {
         VMSTATE_PCI_DEVICE(dev, PIIX4PMState),
         VMSTATE_UINT16(pm1a.sts, PIIX4PMState),
         VMSTATE_UINT16(pm1a.en, PIIX4PMState),
-        VMSTATE_UINT16(pmcntrl, PIIX4PMState),
+        VMSTATE_UINT16(pm1_cnt.cnt, PIIX4PMState),
         VMSTATE_STRUCT(apm, PIIX4PMState, 0, vmstate_apm, APMState),
         VMSTATE_TIMER(tmr.timer, PIIX4PMState),
         VMSTATE_INT64(tmr.overflow_time, PIIX4PMState),
@@ -396,7 +368,7 @@ i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
 
     s = DO_UPCAST(PIIX4PMState, dev, dev);
     s->irq = sci_irq;
-    s->cmos_s3 = cmos_s3;
+    acpi_pm1_cnt_init(&s->pm1_cnt, cmos_s3);
     s->smi_irq = smi_irq;
     s->kvm_enabled = kvm_enabled;
 

hw/vt82c686.c

@@ -157,7 +157,7 @@ static void vt82c686b_write_config(PCIDevice * d, uint32_t address,
 typedef struct VT686PMState {
     PCIDevice dev;
     ACPIPM1EVT pm1a;
-    uint16_t pmcntrl;
+    ACPIPM1CNT pm1_cnt;
     APMState apm;
     ACPIPMTimer tmr;
     PMSMBus smb;
@@ -209,21 +209,7 @@ static void pm_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
         pm_update_sci(s);
         break;
     case 0x04:
-        {
-            int sus_typ;
-            s->pmcntrl = val & ~(SUS_EN);
-            if (val & SUS_EN) {
-                /* change suspend type */
-                sus_typ = (val >> 10) & 3;
-                switch (sus_typ) {
-                case 0: /* soft power off */
-                    qemu_system_shutdown_request();
-                    break;
-                default:
-                    break;
-                }
-            }
-        }
+        acpi_pm1_cnt_write(&s->pm1a, &s->pm1_cnt, val);
         break;
     default:
         break;
@@ -245,7 +231,7 @@ static uint32_t pm_ioport_readw(void *opaque, uint32_t addr)
         val = s->pm1a.en;
         break;
     case 0x04:
-        val = s->pmcntrl;
+        val = s->pm1_cnt.cnt;
         break;
     default:
         val = 0;
@@ -322,7 +308,7 @@ static const VMStateDescription vmstate_acpi = {
         VMSTATE_PCI_DEVICE(dev, VT686PMState),
         VMSTATE_UINT16(pm1a.sts, VT686PMState),
         VMSTATE_UINT16(pm1a.en, VT686PMState),
-        VMSTATE_UINT16(pmcntrl, VT686PMState),
+        VMSTATE_UINT16(pm1_cnt.cnt, VT686PMState),
         VMSTATE_STRUCT(apm, VT686PMState, 0, vmstate_apm, APMState),
         VMSTATE_TIMER(tmr.timer, VT686PMState),
         VMSTATE_INT64(tmr.overflow_time, VT686PMState),
@@ -446,6 +432,7 @@ static int vt82c686b_pm_initfn(PCIDevice *dev)
     apm_init(&s->apm, NULL, s);
 
     acpi_pm_tmr_init(&s->tmr, pm_tmr_timer);
+    acpi_pm1_cnt_init(&s->pm1_cnt, NULL);
 
     pm_smbus_init(&s->dev.qdev, &s->smb);