提交 e96efcfc 编写于 作者: J j_mayer

Fix miscellaneous display warnings for PowerPC & alpha targets

and parallel CFI flash driver.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2661 c046a42c-6fe2-441c-8c8c-71466251a162
上级 ba13c432
......@@ -91,7 +91,7 @@ static uint32_t pflash_read (pflash_t *pfl, target_ulong offset, int width)
uint32_t ret;
uint8_t *p;
DPRINTF("%s: offset %08x\n", __func__, offset);
DPRINTF("%s: offset " TARGET_FMT_lx "\n", __func__, offset);
ret = -1;
offset -= pfl->base;
boff = offset & 0xFF;
......@@ -161,7 +161,7 @@ static uint32_t pflash_read (pflash_t *pfl, target_ulong offset, int width)
default:
goto flash_read;
}
DPRINTF("%s: ID %d %x\n", __func__, boff, ret);
DPRINTF("%s: ID " TARGET_FMT_ld " %x\n", __func__, boff, ret);
break;
case 0xA0:
case 0x10:
......@@ -214,7 +214,8 @@ static void pflash_write (pflash_t *pfl, target_ulong offset, uint32_t value,
offset -= pfl->base;
cmd = value;
DPRINTF("%s: offset %08x %08x %d\n", __func__, offset, value, width);
DPRINTF("%s: offset " TARGET_FMT_lx " %08x %d\n", __func__,
offset, value, width);
if (pfl->cmd != 0xA0 && cmd == 0xF0) {
DPRINTF("%s: flash reset asked (%02x %02x)\n",
__func__, pfl->cmd, cmd);
......@@ -239,7 +240,7 @@ static void pflash_write (pflash_t *pfl, target_ulong offset, uint32_t value,
return;
}
if (boff != 0x555 || cmd != 0xAA) {
DPRINTF("%s: unlock0 failed %04x %02x %04x\n",
DPRINTF("%s: unlock0 failed " TARGET_FMT_lx " %02x %04x\n",
__func__, boff, cmd, 0x555);
goto reset_flash;
}
......@@ -249,7 +250,8 @@ static void pflash_write (pflash_t *pfl, target_ulong offset, uint32_t value,
/* We started an unlock sequence */
check_unlock1:
if (boff != 0x2AA || cmd != 0x55) {
DPRINTF("%s: unlock1 failed %04x %02x\n", __func__, boff, cmd);
DPRINTF("%s: unlock1 failed " TARGET_FMT_lx " %02x\n", __func__,
boff, cmd);
goto reset_flash;
}
DPRINTF("%s: unlock sequence done\n", __func__);
......@@ -257,7 +259,8 @@ static void pflash_write (pflash_t *pfl, target_ulong offset, uint32_t value,
case 2:
/* We finished an unlock sequence */
if (!pfl->bypass && boff != 0x555) {
DPRINTF("%s: command failed %04x %02x\n", __func__, boff, cmd);
DPRINTF("%s: command failed " TARGET_FMT_lx " %02x\n", __func__,
boff, cmd);
goto reset_flash;
}
switch (cmd) {
......@@ -281,7 +284,7 @@ static void pflash_write (pflash_t *pfl, target_ulong offset, uint32_t value,
/* We need another unlock sequence */
goto check_unlock0;
case 0xA0:
DPRINTF("%s: write data offset %08x %08x %d\n",
DPRINTF("%s: write data offset " TARGET_FMT_lx " %08x %d\n",
__func__, offset, value, width);
p = pfl->storage;
switch (width) {
......@@ -352,7 +355,7 @@ static void pflash_write (pflash_t *pfl, target_ulong offset, uint32_t value,
switch (cmd) {
case 0x10:
if (boff != 0x555) {
DPRINTF("%s: chip erase: invalid address %04x\n",
DPRINTF("%s: chip erase: invalid address " TARGET_FMT_lx "\n",
__func__, offset);
goto reset_flash;
}
......@@ -369,7 +372,8 @@ static void pflash_write (pflash_t *pfl, target_ulong offset, uint32_t value,
/* Sector erase */
p = pfl->storage;
offset &= ~(pfl->sector_len - 1);
DPRINTF("%s: start sector erase at %08x\n", __func__, offset);
DPRINTF("%s: start sector erase at " TARGET_FMT_lx "\n", __func__,
offset);
memset(p + offset, 0xFF, pfl->sector_len);
pflash_update(pfl, offset, pfl->sector_len);
pfl->status = 0x00;
......
......@@ -464,8 +464,8 @@ static void cpu_4xx_fit_cb (void *opaque)
if ((env->spr[SPR_40x_TCR] >> 23) & 0x1)
ppc_set_irq(env, PPC_INTERRUPT_FIT, 1);
if (loglevel) {
fprintf(logfile, "%s: ir %d TCR %08x TSR %08x\n", __func__,
(env->spr[SPR_40x_TCR] >> 23) & 0x1,
fprintf(logfile, "%s: ir %d TCR " ADDRX " TSR " ADDRX "\n", __func__,
(int)((env->spr[SPR_40x_TCR] >> 23) & 0x1),
env->spr[SPR_40x_TCR], env->spr[SPR_40x_TSR]);
}
}
......@@ -495,9 +495,10 @@ static void cpu_4xx_pit_cb (void *opaque)
if ((env->spr[SPR_40x_TCR] >> 26) & 0x1)
ppc_set_irq(env, PPC_INTERRUPT_PIT, 1);
if (loglevel) {
fprintf(logfile, "%s: ar %d ir %d TCR %08x TSR %08x %08lx\n", __func__,
(env->spr[SPR_40x_TCR] >> 22) & 0x1,
(env->spr[SPR_40x_TCR] >> 26) & 0x1,
fprintf(logfile, "%s: ar %d ir %d TCR " ADDRX " TSR " ADDRX " "
"%016" PRIx64 "\n", __func__,
(int)((env->spr[SPR_40x_TCR] >> 22) & 0x1),
(int)((env->spr[SPR_40x_TCR] >> 26) & 0x1),
env->spr[SPR_40x_TCR], env->spr[SPR_40x_TSR],
ppcemb_timer->pit_reload);
}
......@@ -536,7 +537,7 @@ static void cpu_4xx_wdt_cb (void *opaque)
if (next == now)
next++;
if (loglevel) {
fprintf(logfile, "%s: TCR %08x TSR %08x\n", __func__,
fprintf(logfile, "%s: TCR " ADDRX " TSR " ADDRX "\n", __func__,
env->spr[SPR_40x_TCR], env->spr[SPR_40x_TSR]);
}
switch ((env->spr[SPR_40x_TSR] >> 30) & 0x3) {
......@@ -587,7 +588,7 @@ void store_40x_pit (CPUState *env, target_ulong val)
qemu_del_timer(tb_env->decr_timer);
} else {
if (loglevel)
fprintf(logfile, "%s: start PIT 0x%08x\n", __func__, val);
fprintf(logfile, "%s: start PIT 0x" ADDRX "\n", __func__, val);
now = qemu_get_clock(vm_clock);
next = now + muldiv64(val, ticks_per_sec, tb_env->tb_freq);
if (next == now)
......
......@@ -48,7 +48,7 @@ static int macio_nvram_mem_index = -1;
static void dbdma_writeb (void *opaque, target_phys_addr_t addr, uint32_t value)
{
printf("%s: 0x%08x <= 0x%08x\n", __func__, addr, value);
printf("%s: 0x" PADDRX " <= 0x%08x\n", __func__, addr, value);
}
static void dbdma_writew (void *opaque, target_phys_addr_t addr, uint32_t value)
......@@ -61,7 +61,7 @@ static void dbdma_writel (void *opaque, target_phys_addr_t addr, uint32_t value)
static uint32_t dbdma_readb (void *opaque, target_phys_addr_t addr)
{
printf("%s: 0x%08x => 0x00000000\n", __func__, addr);
printf("%s: 0x" PADDRX " => 0x00000000\n", __func__, addr);
return 0;
}
......@@ -261,7 +261,7 @@ static int vga_osi_call(CPUState *env)
/* R6 = x, R7 = y, R8 = visible, R9 = data */
break;
default:
fprintf(stderr, "unsupported OSI call R5=%08x\n", env->gpr[5]);
fprintf(stderr, "unsupported OSI call R5=" REGX "\n", env->gpr[5]);
break;
}
return 1; /* osi_call handled */
......
......@@ -755,10 +755,10 @@ void cpu_loop(CPUPPCState *env)
info._sifields._sigfault._addr = env->nip - 4;
queue_signal(info.si_signo, &info);
case EXCP_DSI:
fprintf(stderr, "Invalid data memory access: 0x%08x\n",
fprintf(stderr, "Invalid data memory access: 0x" ADDRX "\n",
env->spr[SPR_DAR]);
if (loglevel) {
fprintf(logfile, "Invalid data memory access: 0x%08x\n",
fprintf(logfile, "Invalid data memory access: 0x" ADDRX "\n",
env->spr[SPR_DAR]);
}
switch (env->error_code & 0xFF000000) {
......@@ -1549,7 +1549,7 @@ void cpu_loop(CPUM68KState *env)
#ifdef TARGET_ALPHA
void cpu_loop (CPUState *env)
{
int trapnr, ret;
int trapnr;
target_siginfo_t info;
while (1) {
......
......@@ -382,6 +382,13 @@ enum {
IR_ZERO = 31,
};
CPUAlphaState * cpu_alpha_init (void);
int cpu_alpha_exec(CPUAlphaState *s);
/* you can call this signal handler from your SIGBUS and SIGSEGV
signal handlers to inform the virtual CPU of exceptions. non zero
is returned if the signal was handled by the virtual CPU. */
int cpu_alpha_signal_handler(int host_signum, void *pinfo,
void *puc);
int cpu_alpha_mfpr (CPUState *env, int iprn, uint64_t *valp);
int cpu_alpha_mtpr (CPUState *env, int iprn, uint64_t val, uint64_t *oldvalp);
void cpu_loop_exit (void);
......
......@@ -2004,7 +2004,8 @@ int gen_intermediate_code_internal (CPUState *env, TranslationBlock *tb,
#if defined ALPHA_DEBUG_DISAS
insn_count++;
if (logfile != NULL) {
fprintf(logfile, "pc %016lx mem_idx\n", ctx.pc, ctx.mem_idx);
fprintf(logfile, "pc " TARGET_FMT_lx " mem_idx %d\n",
ctx.pc, ctx.mem_idx);
}
#endif
insn = ldl_code(ctx.pc);
......
......@@ -35,24 +35,26 @@ typedef uint64_t ppc_gpr_t;
#define TARGET_LONG_BITS 64
#define TARGET_GPR_BITS 64
#define REGX "%016" PRIx64
#define ADDRX "%016" PRIx64
#elif defined(TARGET_PPCSPE)
/* e500v2 have 36 bits physical address space */
#define TARGET_PHYS_ADDR_BITS 64
/* GPR are 64 bits: used by vector extension */
typedef uint64_t ppc_gpr_t;
#define TARGET_LONG_BITS 32
#define TARGET_GPR_BITS 64
#define REGX "%016" PRIx64
#define ADDRX "%08" PRIx32
#else
typedef uint32_t ppc_gpr_t;
#define TARGET_LONG_BITS 32
#define TARGET_GPR_BITS 32
#define REGX "%08" PRIx32
#define ADDRX "%08" PRIx32
#endif
#include "cpu-defs.h"
#define ADDRX TARGET_FMT_lx
#define PADDRX TARGET_FMT_plx
#include <setjmp.h>
#include "softfloat.h"
......
......@@ -38,7 +38,7 @@
/* PowerPC MMU emulation */
#if defined(CONFIG_USER_ONLY)
int cpu_ppc_handle_mmu_fault (CPUState *env, uint32_t address, int rw,
int cpu_ppc_handle_mmu_fault (CPUState *env, target_ulong address, int rw,
int is_user, int is_softmmu)
{
int exception, error_code;
......@@ -631,7 +631,7 @@ static int get_segment (CPUState *env, mmu_ctx_t *ctx,
}
int mmu4xx_get_physical_address (CPUState *env, mmu_ctx_t *ctx,
uint32_t address, int rw, int access_type)
target_ulong address, int rw, int access_type)
{
ppcemb_tlb_t *tlb;
target_phys_addr_t raddr;
......@@ -649,8 +649,8 @@ int mmu4xx_get_physical_address (CPUState *env, mmu_ctx_t *ctx,
}
mask = ~(tlb->size - 1);
if (loglevel) {
fprintf(logfile, "%s: TLB %d address %08x PID %04x <=> "
"%08x %08x %04x\n",
fprintf(logfile, "%s: TLB %d address " ADDRX " PID " ADDRX " <=> "
ADDRX " " ADDRX " " ADDRX "\n",
__func__, i, address, env->spr[SPR_40x_PID],
tlb->EPN, mask, tlb->PID);
}
......@@ -832,7 +832,7 @@ target_phys_addr_t cpu_get_phys_page_debug (CPUState *env, target_ulong addr)
}
/* Perform address translation */
int cpu_ppc_handle_mmu_fault (CPUState *env, uint32_t address, int rw,
int cpu_ppc_handle_mmu_fault (CPUState *env, target_ulong address, int rw,
int is_user, int is_softmmu)
{
mmu_ctx_t ctx;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册