target/arm: change arch timer registers access permission

Some generic arch timer registers are Config-RW in the EL0,
which means the EL0 exception level can have write permission
if it is appropriately configured.

When VM access registers, QEMU firstly checks whether they have RW
permission, then check whether it is appropriately configured.
If they are defined to read only in EL0, even though they have been
appropriately configured, they still do not have write permission.
So need to add the write permission according to ARMV8 spec when
define it.
Signed-off-by: NDongjiu Geng <gengdongjiu@huawei.com>
Message-id: 1552395177-12608-1-git-send-email-gengdongjiu@huawei.com
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target/arm/helper.c

@@ -2665,7 +2665,7 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
     /* per-timer control */
     { .name = "CNTP_CTL", .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 1,
       .secure = ARM_CP_SECSTATE_NS,
-      .type = ARM_CP_IO | ARM_CP_ALIAS, .access = PL1_RW | PL0_R,
+      .type = ARM_CP_IO | ARM_CP_ALIAS, .access = PL0_RW,
       .accessfn = gt_ptimer_access,
       .fieldoffset = offsetoflow32(CPUARMState,
                                    cp15.c14_timer[GTIMER_PHYS].ctl),
@@ -2674,7 +2674,7 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
     { .name = "CNTP_CTL_S",
       .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 1,
       .secure = ARM_CP_SECSTATE_S,
-      .type = ARM_CP_IO | ARM_CP_ALIAS, .access = PL1_RW | PL0_R,
+      .type = ARM_CP_IO | ARM_CP_ALIAS, .access = PL0_RW,
       .accessfn = gt_ptimer_access,
       .fieldoffset = offsetoflow32(CPUARMState,
                                    cp15.c14_timer[GTIMER_SEC].ctl),
@@ -2682,14 +2682,14 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
     },
     { .name = "CNTP_CTL_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 2, .opc2 = 1,
-      .type = ARM_CP_IO, .access = PL1_RW | PL0_R,
+      .type = ARM_CP_IO, .access = PL0_RW,
       .accessfn = gt_ptimer_access,
       .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].ctl),
       .resetvalue = 0,
       .writefn = gt_phys_ctl_write, .raw_writefn = raw_write,
     },
     { .name = "CNTV_CTL", .cp = 15, .crn = 14, .crm = 3, .opc1 = 0, .opc2 = 1,
-      .type = ARM_CP_IO | ARM_CP_ALIAS, .access = PL1_RW | PL0_R,
+      .type = ARM_CP_IO | ARM_CP_ALIAS, .access = PL0_RW,
       .accessfn = gt_vtimer_access,
       .fieldoffset = offsetoflow32(CPUARMState,
                                    cp15.c14_timer[GTIMER_VIRT].ctl),
@@ -2697,7 +2697,7 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
     },
     { .name = "CNTV_CTL_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 3, .opc2 = 1,
-      .type = ARM_CP_IO, .access = PL1_RW | PL0_R,
+      .type = ARM_CP_IO, .access = PL0_RW,
       .accessfn = gt_vtimer_access,
       .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].ctl),
       .resetvalue = 0,
@@ -2706,31 +2706,31 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
     /* TimerValue views: a 32 bit downcounting view of the underlying state */
     { .name = "CNTP_TVAL", .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 0,
       .secure = ARM_CP_SECSTATE_NS,
-      .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL1_RW | PL0_R,
+      .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW,
       .accessfn = gt_ptimer_access,
       .readfn = gt_phys_tval_read, .writefn = gt_phys_tval_write,
     },
     { .name = "CNTP_TVAL_S",
       .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 0,
       .secure = ARM_CP_SECSTATE_S,
-      .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL1_RW | PL0_R,
+      .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW,
       .accessfn = gt_ptimer_access,
       .readfn = gt_sec_tval_read, .writefn = gt_sec_tval_write,
     },
     { .name = "CNTP_TVAL_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 2, .opc2 = 0,
-      .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL1_RW | PL0_R,
+      .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW,
       .accessfn = gt_ptimer_access, .resetfn = gt_phys_timer_reset,
       .readfn = gt_phys_tval_read, .writefn = gt_phys_tval_write,
     },
     { .name = "CNTV_TVAL", .cp = 15, .crn = 14, .crm = 3, .opc1 = 0, .opc2 = 0,
-      .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL1_RW | PL0_R,
+      .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW,
       .accessfn = gt_vtimer_access,
       .readfn = gt_virt_tval_read, .writefn = gt_virt_tval_write,
     },
     { .name = "CNTV_TVAL_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 3, .opc2 = 0,
-      .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL1_RW | PL0_R,
+      .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW,
       .accessfn = gt_vtimer_access, .resetfn = gt_virt_timer_reset,
       .readfn = gt_virt_tval_read, .writefn = gt_virt_tval_write,
     },
@@ -2758,7 +2758,7 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
     /* Comparison value, indicating when the timer goes off */
     { .name = "CNTP_CVAL", .cp = 15, .crm = 14, .opc1 = 2,
       .secure = ARM_CP_SECSTATE_NS,
-      .access = PL1_RW | PL0_R,
+      .access = PL0_RW,
       .type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_ALIAS,
       .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].cval),
       .accessfn = gt_ptimer_access,
@@ -2766,7 +2766,7 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
     },
     { .name = "CNTP_CVAL_S", .cp = 15, .crm = 14, .opc1 = 2,
       .secure = ARM_CP_SECSTATE_S,
-      .access = PL1_RW | PL0_R,
+      .access = PL0_RW,
       .type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_ALIAS,
       .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_SEC].cval),
       .accessfn = gt_ptimer_access,
@@ -2774,14 +2774,14 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
     },
     { .name = "CNTP_CVAL_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 2, .opc2 = 2,
-      .access = PL1_RW | PL0_R,
+      .access = PL0_RW,
       .type = ARM_CP_IO,
       .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].cval),
       .resetvalue = 0, .accessfn = gt_ptimer_access,
       .writefn = gt_phys_cval_write, .raw_writefn = raw_write,
     },
     { .name = "CNTV_CVAL", .cp = 15, .crm = 14, .opc1 = 3,
-      .access = PL1_RW | PL0_R,
+      .access = PL0_RW,
       .type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_ALIAS,
       .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].cval),
       .accessfn = gt_vtimer_access,
@@ -2789,7 +2789,7 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
     },
     { .name = "CNTV_CVAL_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 3, .opc2 = 2,
-      .access = PL1_RW | PL0_R,
+      .access = PL0_RW,
       .type = ARM_CP_IO,
       .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].cval),
       .resetvalue = 0, .accessfn = gt_vtimer_access,