switch scsi bus to inplace allocation.

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

hw/esp.c

@@ -63,7 +63,7 @@ struct ESPState {
     uint8_t ti_buf[TI_BUFSZ];
     uint32_t sense;
     uint32_t dma;
-    SCSIBus *bus;
+    SCSIBus bus;
     SCSIDevice *current_dev;
     uint8_t cmdbuf[TI_BUFSZ];
     uint32_t cmdlen;
@@ -191,7 +191,7 @@ static uint32_t get_cmd(ESPState *s, uint8_t *buf)
         s->async_len = 0;
     }
 
-    if (target >= ESP_MAX_DEVS || !s->bus->devs[target]) {
+    if (target >= ESP_MAX_DEVS || !s->bus.devs[target]) {
         // No such drive
         s->rregs[ESP_RSTAT] = 0;
         s->rregs[ESP_RINTR] = INTR_DC;
@@ -199,7 +199,7 @@ static uint32_t get_cmd(ESPState *s, uint8_t *buf)
         esp_raise_irq(s);
         return 0;
     }
-    s->current_dev = s->bus->devs[target];
+    s->current_dev = s->bus.devs[target];
     return dmalen;
 }
 
@@ -672,8 +672,8 @@ static int esp_init1(SysBusDevice *dev)
 
     qdev_init_gpio_in(&dev->qdev, parent_esp_reset, 1);
 
-    s->bus = scsi_bus_new(&dev->qdev, 0, ESP_MAX_DEVS, esp_command_complete);
-    scsi_bus_legacy_handle_cmdline(s->bus);
+    scsi_bus_new(&s->bus, &dev->qdev, 0, ESP_MAX_DEVS, esp_command_complete);
+    scsi_bus_legacy_handle_cmdline(&s->bus);
     return 0;
 }
 

hw/lsi53c895a.c

@@ -193,7 +193,7 @@ typedef struct {
      * 2 if processing DMA from lsi_execute_script.
      * 3 if a DMA operation is in progress.  */
     int waiting;
-    SCSIBus *bus;
+    SCSIBus bus;
     SCSIDevice *current_dev;
     int current_lun;
     /* The tag is a combination of the device ID and the SCSI tag.  */
@@ -585,7 +585,7 @@ static void lsi_reselect(LSIState *s, uint32_t tag)
     id = (tag >> 8) & 0xf;
     s->ssid = id | 0x80;
     DPRINTF("Reselected target %d\n", id);
-    s->current_dev = s->bus->devs[id];
+    s->current_dev = s->bus.devs[id];
     s->current_tag = tag;
     s->scntl1 |= LSI_SCNTL1_CON;
     lsi_set_phase(s, PHASE_MI);
@@ -1041,7 +1041,7 @@ again:
                 }
                 s->sstat0 |= LSI_SSTAT0_WOA;
                 s->scntl1 &= ~LSI_SCNTL1_IARB;
-                if (id >= LSI_MAX_DEVS || !s->bus->devs[id]) {
+                if (id >= LSI_MAX_DEVS || !s->bus.devs[id]) {
                     DPRINTF("Selected absent target %d\n", id);
                     lsi_script_scsi_interrupt(s, 0, LSI_SIST1_STO);
                     lsi_disconnect(s);
@@ -1052,7 +1052,7 @@ again:
                 /* ??? Linux drivers compain when this is set.  Maybe
                    it only applies in low-level mode (unimplemented).
                 lsi_script_scsi_interrupt(s, LSI_SIST0_CMP, 0); */
-                s->current_dev = s->bus->devs[id];
+                s->current_dev = s->bus.devs[id];
                 s->current_tag = id << 8;
                 s->scntl1 |= LSI_SCNTL1_CON;
                 if (insn & (1 << 3)) {
@@ -2178,8 +2178,8 @@ static int lsi_scsi_init(PCIDevice *dev)
 
     lsi_soft_reset(s);
 
-    s->bus = scsi_bus_new(&dev->qdev, 1, LSI_MAX_DEVS, lsi_command_complete);
-    scsi_bus_legacy_handle_cmdline(s->bus);
+    scsi_bus_new(&s->bus, &dev->qdev, 1, LSI_MAX_DEVS, lsi_command_complete);
+    scsi_bus_legacy_handle_cmdline(&s->bus);
     register_savevm("lsiscsi", -1, 0, lsi_scsi_save, lsi_scsi_load, s);
     return 0;
 }

hw/scsi-bus.c

@@ -15,17 +15,14 @@ static struct BusInfo scsi_bus_info = {
 static int next_scsi_bus;
 
 /* Create a scsi bus, and attach devices to it.  */
-SCSIBus *scsi_bus_new(DeviceState *host, int tcq, int ndev,
-                      scsi_completionfn complete)
+void scsi_bus_new(SCSIBus *bus, DeviceState *host, int tcq, int ndev,
+                  scsi_completionfn complete)
 {
-    SCSIBus *bus;
-
-    bus = FROM_QBUS(SCSIBus, qbus_create(&scsi_bus_info, host, NULL));
+    qbus_create_inplace(&bus->qbus, &scsi_bus_info, host, NULL);
     bus->busnr = next_scsi_bus++;
     bus->tcq = tcq;
     bus->ndev = ndev;
     bus->complete = complete;
-    return bus;
 }
 
 static int scsi_qdev_init(DeviceState *qdev, DeviceInfo *base)

hw/scsi-disk.h

@@ -52,8 +52,8 @@ struct SCSIBus {
     SCSIDevice *devs[8];
 };
 
-SCSIBus *scsi_bus_new(DeviceState *host, int tcq, int ndev,
-                      scsi_completionfn complete);
+void scsi_bus_new(SCSIBus *bus, DeviceState *host, int tcq, int ndev,
+                  scsi_completionfn complete);
 void scsi_qdev_register(SCSIDeviceInfo *info);
 
 static inline SCSIBus *scsi_bus_from_device(SCSIDevice *d)

hw/usb-msd.c

@@ -45,7 +45,7 @@ typedef struct {
     uint32_t data_len;
     uint32_t residue;
     uint32_t tag;
-    SCSIBus *bus;
+    SCSIBus bus;
     DriveInfo *dinfo;
     SCSIDevice *scsi_dev;
     int result;
@@ -527,8 +527,8 @@ static int usb_msd_initfn(USBDevice *dev)
     }
 
     s->dev.speed = USB_SPEED_FULL;
-    s->bus = scsi_bus_new(&s->dev.qdev, 0, 1, usb_msd_command_complete);
-    s->scsi_dev = scsi_bus_legacy_add_drive(s->bus, s->dinfo, 0);
+    scsi_bus_new(&s->bus, &s->dev.qdev, 0, 1, usb_msd_command_complete);
+    s->scsi_dev = scsi_bus_legacy_add_drive(&s->bus, s->dinfo, 0);
     usb_msd_handle_reset(dev);
     return 0;
 }