提交 c9baa30f 编写于 作者: R Richard Henderson

tcg-s390: Use qemu_getauxval in query_facilities

No need to set up a SIGILL signal handler for detection anymore.

Remove a ton of sanity checks that must be true, given that we're
requiring a 64-bit build (the note about 31-bit KVM is satisfied
by configuring with TCI).
Signed-off-by: NRichard Henderson <rth@twiddle.net>
上级 41d9ea80
......@@ -479,6 +479,20 @@ typedef struct {
#define HWCAP_SPARC_V9 16
#define HWCAP_SPARC_ULTRA3 32
/* Bits present in AT_HWCAP for s390. */
#define HWCAP_S390_ESAN3 1
#define HWCAP_S390_ZARCH 2
#define HWCAP_S390_STFLE 4
#define HWCAP_S390_MSA 8
#define HWCAP_S390_LDISP 16
#define HWCAP_S390_EIMM 32
#define HWCAP_S390_DFP 64
#define HWCAP_S390_HPAGE 128
#define HWCAP_S390_ETF3EH 256
#define HWCAP_S390_HIGH_GPRS 512
#define HWCAP_S390_TE 1024
/*
* 68k ELF relocation types
*/
......
......@@ -31,6 +31,8 @@
#error "unsupported code generation mode"
#endif
#include "elf.h"
/* ??? The translation blocks produced by TCG are generally small enough to
be entirely reachable with a 16-bit displacement. Leaving the option for
a 32-bit displacement here Just In Case. */
......@@ -2233,91 +2235,18 @@ static void sigill_handler(int sig)
static void query_facilities(void)
{
struct sigaction sa_old, sa_new;
register int r0 __asm__("0");
register void *r1 __asm__("1");
int fail;
memset(&sa_new, 0, sizeof(sa_new));
sa_new.sa_handler = sigill_handler;
sigaction(SIGILL, &sa_new, &sa_old);
/* First, try STORE FACILITY LIST EXTENDED. If this is present, then
we need not do any more probing. Unfortunately, this itself is an
extension and the original STORE FACILITY LIST instruction is
kernel-only, storing its results at absolute address 200. */
/* stfle 0(%r1) */
r1 = &facilities;
asm volatile(".word 0xb2b0,0x1000"
: "=r"(r0) : "0"(0), "r"(r1) : "memory", "cc");
if (got_sigill) {
/* STORE FACILITY EXTENDED is not available. Probe for one of each
kind of instruction that we're interested in. */
/* ??? Possibly some of these are in practice never present unless
the store-facility-extended facility is also present. But since
that isn't documented it's just better to probe for each. */
/* Test for z/Architecture. Required even in 31-bit mode. */
got_sigill = 0;
/* agr %r0,%r0 */
asm volatile(".word 0xb908,0x0000" : "=r"(r0) : : "cc");
if (!got_sigill) {
facilities |= FACILITY_ZARCH_ACTIVE;
}
/* Test for long displacement. */
got_sigill = 0;
/* ly %r0,0(%r1) */
r1 = &facilities;
asm volatile(".word 0xe300,0x1000,0x0058"
: "=r"(r0) : "r"(r1) : "cc");
if (!got_sigill) {
facilities |= FACILITY_LONG_DISP;
}
/* Test for extended immediates. */
got_sigill = 0;
/* afi %r0,0 */
asm volatile(".word 0xc209,0x0000,0x0000" : : : "cc");
if (!got_sigill) {
facilities |= FACILITY_EXT_IMM;
}
/* Test for general-instructions-extension. */
got_sigill = 0;
/* msfi %r0,1 */
asm volatile(".word 0xc201,0x0000,0x0001");
if (!got_sigill) {
facilities |= FACILITY_GEN_INST_EXT;
}
}
sigaction(SIGILL, &sa_old, NULL);
unsigned long hwcap = qemu_getauxval(AT_HWCAP);
/* The translator currently uses these extensions unconditionally.
Pruning this back to the base ESA/390 architecture doesn't seem
worthwhile, since even the KVM target requires z/Arch. */
fail = 0;
if ((facilities & FACILITY_ZARCH_ACTIVE) == 0) {
fprintf(stderr, "TCG: z/Arch facility is required.\n");
fprintf(stderr, "TCG: Boot with a 64-bit enabled kernel.\n");
fail = 1;
}
if ((facilities & FACILITY_LONG_DISP) == 0) {
fprintf(stderr, "TCG: long-displacement facility is required.\n");
fail = 1;
}
/* Is STORE FACILITY LIST EXTENDED available? Honestly, I believe this
is present on all 64-bit systems, but let's check for it anyway. */
if (hwcap & HWCAP_S390_STFLE) {
register int r0 __asm__("0");
register void *r1 __asm__("1");
/* So far there's just enough support for 31-bit mode to let the
compile succeed. This is good enough to run QEMU with KVM. */
if (sizeof(void *) != 8) {
fprintf(stderr, "TCG: 31-bit mode is not supported.\n");
fail = 1;
}
if (fail) {
exit(-1);
/* stfle 0(%r1) */
r1 = &facilities;
asm volatile(".word 0xb2b0,0x1000"
: "=r"(r0) : "0"(0), "r"(r1) : "memory", "cc");
}
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册