提交 c7d344af 编写于 作者: B bellard

- remove the ugly "stop" pseudo-opcode.

- fix fsqrt instruction (there's no fsqrt.).
- floating point load and store are not integer instructions.
- wrong opcode for dcba instructions.
(Jocelyn Mayer)


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1378 c046a42c-6fe2-441c-8c8c-71466251a162
上级 e1a2849c
......@@ -325,12 +325,6 @@ GEN_HANDLER(invalid, 0x00, 0x00, 0x00, 0xFFFFFFFF, PPC_NONE)
RET_INVAL(ctx);
}
/* Special opcode to stop emulation */
GEN_HANDLER(stop, 0x06, 0x00, 0xFF, 0x03FFFFC1, PPC_COMMON)
{
RET_EXCP(ctx, EXCP_HLT, 0);
}
static opc_handler_t invalid_handler = {
.inval = 0xFFFFFFFF,
.type = PPC_NONE,
......@@ -867,7 +861,19 @@ _GEN_FLOAT_ACB(sel, sel, 0x3F, 0x17, 0);
GEN_FLOAT_AB(sub, 0x14, 0x000007C0);
/* Optional: */
/* fsqrt */
GEN_FLOAT_BS(sqrt, 0x3F, 0x16);
GEN_HANDLER(fsqrt, 0x3F, 0x16, 0xFF, 0x001F07C0, PPC_FLOAT_OPT)
{
if (!ctx->fpu_enabled) {
RET_EXCP(ctx, EXCP_NO_FP, 0);
return;
}
gen_op_reset_scrfx();
gen_op_load_fpr_FT0(rB(ctx->opcode));
gen_op_fsqrt();
gen_op_store_FT0_fpr(rD(ctx->opcode));
if (Rc(ctx->opcode))
gen_op_set_Rc1();
}
GEN_HANDLER(fsqrts, 0x3B, 0x16, 0xFF, 0x001F07C0, PPC_FLOAT_OPT)
{
......@@ -1434,7 +1440,7 @@ GEN_HANDLER(sync, 0x1F, 0x16, 0x12, 0x03FF0801, PPC_MEM)
/*** Floating-point load ***/
#define GEN_LDF(width, opc) \
GEN_HANDLER(l##width, opc, 0xFF, 0xFF, 0x00000000, PPC_INTEGER) \
GEN_HANDLER(l##width, opc, 0xFF, 0xFF, 0x00000000, PPC_FLOAT) \
{ \
uint32_t simm = SIMM(ctx->opcode); \
if (!ctx->fpu_enabled) { \
......@@ -1453,7 +1459,7 @@ GEN_HANDLER(l##width, opc, 0xFF, 0xFF, 0x00000000, PPC_INTEGER) \
}
#define GEN_LDUF(width, opc) \
GEN_HANDLER(l##width##u, opc, 0xFF, 0xFF, 0x00000000, PPC_INTEGER) \
GEN_HANDLER(l##width##u, opc, 0xFF, 0xFF, 0x00000000, PPC_FLOAT) \
{ \
uint32_t simm = SIMM(ctx->opcode); \
if (!ctx->fpu_enabled) { \
......@@ -1474,7 +1480,7 @@ GEN_HANDLER(l##width##u, opc, 0xFF, 0xFF, 0x00000000, PPC_INTEGER) \
}
#define GEN_LDUXF(width, opc) \
GEN_HANDLER(l##width##ux, 0x1F, 0x17, opc, 0x00000001, PPC_INTEGER) \
GEN_HANDLER(l##width##ux, 0x1F, 0x17, opc, 0x00000001, PPC_FLOAT) \
{ \
if (!ctx->fpu_enabled) { \
RET_EXCP(ctx, EXCP_NO_FP, 0); \
......@@ -1494,7 +1500,7 @@ GEN_HANDLER(l##width##ux, 0x1F, 0x17, opc, 0x00000001, PPC_INTEGER) \
}
#define GEN_LDXF(width, opc2, opc3) \
GEN_HANDLER(l##width##x, 0x1F, opc2, opc3, 0x00000001, PPC_INTEGER) \
GEN_HANDLER(l##width##x, 0x1F, opc2, opc3, 0x00000001, PPC_FLOAT) \
{ \
if (!ctx->fpu_enabled) { \
RET_EXCP(ctx, EXCP_NO_FP, 0); \
......@@ -1525,7 +1531,7 @@ GEN_LDFS(fs, 0x10);
/*** Floating-point store ***/
#define GEN_STF(width, opc) \
GEN_HANDLER(st##width, opc, 0xFF, 0xFF, 0x00000000, PPC_INTEGER) \
GEN_HANDLER(st##width, opc, 0xFF, 0xFF, 0x00000000, PPC_FLOAT) \
{ \
uint32_t simm = SIMM(ctx->opcode); \
if (!ctx->fpu_enabled) { \
......@@ -1544,7 +1550,7 @@ GEN_HANDLER(st##width, opc, 0xFF, 0xFF, 0x00000000, PPC_INTEGER) \
}
#define GEN_STUF(width, opc) \
GEN_HANDLER(st##width##u, opc, 0xFF, 0xFF, 0x00000000, PPC_INTEGER) \
GEN_HANDLER(st##width##u, opc, 0xFF, 0xFF, 0x00000000, PPC_FLOAT) \
{ \
uint32_t simm = SIMM(ctx->opcode); \
if (!ctx->fpu_enabled) { \
......@@ -1564,7 +1570,7 @@ GEN_HANDLER(st##width##u, opc, 0xFF, 0xFF, 0x00000000, PPC_INTEGER) \
}
#define GEN_STUXF(width, opc) \
GEN_HANDLER(st##width##ux, 0x1F, 0x17, opc, 0x00000001, PPC_INTEGER) \
GEN_HANDLER(st##width##ux, 0x1F, 0x17, opc, 0x00000001, PPC_FLOAT) \
{ \
if (!ctx->fpu_enabled) { \
RET_EXCP(ctx, EXCP_NO_FP, 0); \
......@@ -1583,7 +1589,7 @@ GEN_HANDLER(st##width##ux, 0x1F, 0x17, opc, 0x00000001, PPC_INTEGER) \
}
#define GEN_STXF(width, opc2, opc3) \
GEN_HANDLER(st##width##x, 0x1F, opc2, opc3, 0x00000001, PPC_INTEGER) \
GEN_HANDLER(st##width##x, 0x1F, opc2, opc3, 0x00000001, PPC_FLOAT) \
{ \
if (!ctx->fpu_enabled) { \
RET_EXCP(ctx, EXCP_NO_FP, 0); \
......@@ -2370,7 +2376,7 @@ GEN_HANDLER(icbi, 0x1F, 0x16, 0x1E, 0x03E00001, PPC_CACHE)
/* Optional: */
/* dcba */
GEN_HANDLER(dcba, 0x1F, 0x16, 0x07, 0x03E00001, PPC_CACHE_OPT)
GEN_HANDLER(dcba, 0x1F, 0x16, 0x17, 0x03E00001, PPC_CACHE_OPT)
{
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册