提交 c1e703f5 编写于 作者: L Laurent Vivier

linux-user: update netlink emulation

Update enums with entries from linux 4.17

Translate entries that generate logs with iproute2 4.9.0 and
host kernel 4.15:

  # ip address show
  Unknown host QEMU_IFLA type: 43
  Unknown host QEMU_IFLA type: 43
  Unknown host QEMU_IFLA type: 43
  Unknown QEMU_IFLA_BR type 41
  Unknown QEMU_IFLA_BR type 42
  Unknown QEMU_IFLA_BR type 43
  Unknown QEMU_IFLA_BR type 44
  Unknown host QEMU_IFLA type: 43
  Unknown QEMU_IFLA_BR type 41
  Unknown QEMU_IFLA_BR type 42
  Unknown QEMU_IFLA_BR type 43
  Unknown QEMU_IFLA_BR type 44
  Unknown host QEMU_IFLA type: 43
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Message-Id: <20180516221213.11111-1-laurent@vivier.eu>
上级 75578d6f
......@@ -405,6 +405,8 @@ enum {
QEMU_IFLA_BR_PAD,
QEMU_IFLA_BR_VLAN_STATS_ENABLED,
QEMU_IFLA_BR_MCAST_STATS_ENABLED,
QEMU_IFLA_BR_MCAST_IGMP_VERSION,
QEMU_IFLA_BR_MCAST_MLD_VERSION,
QEMU___IFLA_BR_MAX,
};
......@@ -453,6 +455,12 @@ enum {
QEMU_IFLA_GSO_MAX_SIZE,
QEMU_IFLA_PAD,
QEMU_IFLA_XDP,
QEMU_IFLA_EVENT,
QEMU_IFLA_NEW_NETNSID,
QEMU_IFLA_IF_NETNSID,
QEMU_IFLA_CARRIER_UP_COUNT,
QEMU_IFLA_CARRIER_DOWN_COUNT,
QEMU_IFLA_NEW_IFINDEX,
QEMU___IFLA_MAX
};
......@@ -484,6 +492,12 @@ enum {
QEMU_IFLA_BRPORT_FLUSH,
QEMU_IFLA_BRPORT_MULTICAST_ROUTER,
QEMU_IFLA_BRPORT_PAD,
QEMU_IFLA_BRPORT_MCAST_FLOOD,
QEMU_IFLA_BRPORT_MCAST_TO_UCAST,
QEMU_IFLA_BRPORT_VLAN_TUNNEL,
QEMU_IFLA_BRPORT_BCAST_FLOOD,
QEMU_IFLA_BRPORT_GROUP_FWD_MASK,
QEMU_IFLA_BRPORT_NEIGH_SUPPRESS,
QEMU___IFLA_BRPORT_MAX
};
......@@ -516,6 +530,15 @@ enum {
QEMU___IFLA_INET6_MAX
};
enum {
QEMU_IFLA_XDP_UNSPEC,
QEMU_IFLA_XDP_FD,
QEMU_IFLA_XDP_ATTACHED,
QEMU_IFLA_XDP_FLAGS,
QEMU_IFLA_XDP_PROG_ID,
QEMU___IFLA_XDP_MAX,
};
typedef abi_long (*TargetFdDataFunc)(void *, size_t);
typedef abi_long (*TargetFdAddrFunc)(void *, abi_ulong, socklen_t);
typedef struct TargetFdTrans {
......@@ -2182,6 +2205,10 @@ static abi_long host_to_target_data_bridge_nlattr(struct nlattr *nlattr,
case QEMU_IFLA_BR_NF_CALL_IPTABLES:
case QEMU_IFLA_BR_NF_CALL_IP6TABLES:
case QEMU_IFLA_BR_NF_CALL_ARPTABLES:
case QEMU_IFLA_BR_VLAN_STATS_ENABLED:
case QEMU_IFLA_BR_MCAST_STATS_ENABLED:
case QEMU_IFLA_BR_MCAST_IGMP_VERSION:
case QEMU_IFLA_BR_MCAST_MLD_VERSION:
break;
/* uint16_t */
case QEMU_IFLA_BR_PRIORITY:
......@@ -2253,6 +2280,11 @@ static abi_long host_to_target_slave_data_bridge_nlattr(struct nlattr *nlattr,
case QEMU_IFLA_BRPORT_TOPOLOGY_CHANGE_ACK:
case QEMU_IFLA_BRPORT_CONFIG_PENDING:
case QEMU_IFLA_BRPORT_MULTICAST_ROUTER:
case QEMU_IFLA_BRPORT_MCAST_FLOOD:
case QEMU_IFLA_BRPORT_MCAST_TO_UCAST:
case QEMU_IFLA_BRPORT_VLAN_TUNNEL:
case QEMU_IFLA_BRPORT_BCAST_FLOOD:
case QEMU_IFLA_BRPORT_NEIGH_SUPPRESS:
break;
/* uint16_t */
case QEMU_IFLA_BRPORT_PRIORITY:
......@@ -2260,6 +2292,7 @@ static abi_long host_to_target_slave_data_bridge_nlattr(struct nlattr *nlattr,
case QEMU_IFLA_BRPORT_DESIGNATED_COST:
case QEMU_IFLA_BRPORT_ID:
case QEMU_IFLA_BRPORT_NO:
case QEMU_IFLA_BRPORT_GROUP_FWD_MASK:
u16 = NLA_DATA(nlattr);
*u16 = tswap16(*u16);
break;
......@@ -2434,6 +2467,27 @@ static abi_long host_to_target_data_spec_nlattr(struct nlattr *nlattr,
return 0;
}
static abi_long host_to_target_data_xdp_nlattr(struct nlattr *nlattr,
void *context)
{
uint32_t *u32;
switch (nlattr->nla_type) {
/* uint8_t */
case QEMU_IFLA_XDP_ATTACHED:
break;
/* uint32_t */
case QEMU_IFLA_XDP_PROG_ID:
u32 = NLA_DATA(nlattr);
*u32 = tswap32(*u32);
break;
default:
gemu_log("Unknown host XDP type: %d\n", nlattr->nla_type);
break;
}
return 0;
}
static abi_long host_to_target_data_link_rtattr(struct rtattr *rtattr)
{
uint32_t *u32;
......@@ -2559,6 +2613,10 @@ static abi_long host_to_target_data_link_rtattr(struct rtattr *rtattr)
return host_to_target_for_each_nlattr(RTA_DATA(rtattr), rtattr->rta_len,
NULL,
host_to_target_data_spec_nlattr);
case QEMU_IFLA_XDP:
return host_to_target_for_each_nlattr(RTA_DATA(rtattr), rtattr->rta_len,
NULL,
host_to_target_data_xdp_nlattr);
default:
gemu_log("Unknown host QEMU_IFLA type: %d\n", rtattr->rta_type);
break;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册