提交 be13cc7a 编写于 作者: A Alexander Graf

PPC: Qdev'ify e500 pci

The e500 PCI controller isn't qdev'ified yet. This leads to severe issues
when running with -drive.

To be able to use a virtio disk with an e500 VM, let's convert the PCI
controller over to qdev.
Reviewed-by: NPaul Brook <paul@codesourcery.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>
上级 5389055a
/*
* QEMU PowerPC E500 emulation shared definitions
*
* Copyright (C) 2009 Freescale Semiconductor, Inc. All rights reserved.
*
* Author: Yu Liu, <yu.liu@freescale.com>
*
* This file is derived from hw/ppc440.h
* the copyright for that material belongs to the original owners.
*
* This is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#if !defined(PPC_E500_H)
#define PPC_E500_H
PCIBus *ppce500_pci_init(qemu_irq *pic, target_phys_addr_t registers);
#endif /* !defined(PPC_E500_H) */
......@@ -29,9 +29,9 @@
#include "device_tree.h"
#include "openpic.h"
#include "ppc.h"
#include "ppce500.h"
#include "loader.h"
#include "elf.h"
#include "sysbus.h"
#define BINARY_DEVICE_TREE_FILE "mpc8544ds.dtb"
#define UIMAGE_LOAD_BASE 0
......@@ -222,7 +222,8 @@ static void mpc8544ds_init(ram_addr_t ram_size,
target_long initrd_size=0;
int i=0;
unsigned int pci_irq_nrs[4] = {1, 2, 3, 4};
qemu_irq *irqs, *mpic, *pci_irqs;
qemu_irq *irqs, *mpic;
DeviceState *dev;
struct boot_info *boot_info;
/* Setup CPU */
......@@ -270,12 +271,11 @@ static void mpc8544ds_init(ram_addr_t ram_size,
}
/* PCI */
pci_irqs = qemu_malloc(sizeof(qemu_irq) * 4);
pci_irqs[0] = mpic[pci_irq_nrs[0]];
pci_irqs[1] = mpic[pci_irq_nrs[1]];
pci_irqs[2] = mpic[pci_irq_nrs[2]];
pci_irqs[3] = mpic[pci_irq_nrs[3]];
pci_bus = ppce500_pci_init(pci_irqs, MPC8544_PCI_REGS_BASE);
dev = sysbus_create_varargs("e500-pcihost", MPC8544_PCI_REGS_BASE,
mpic[pci_irq_nrs[0]], mpic[pci_irq_nrs[1]],
mpic[pci_irq_nrs[2]], mpic[pci_irq_nrs[3]],
NULL);
pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
if (!pci_bus)
printf("couldn't create PCI controller!\n");
......
......@@ -15,7 +15,6 @@
*/
#include "hw.h"
#include "ppce500.h"
#include "pci.h"
#include "pci_host.h"
#include "bswap.h"
......@@ -29,7 +28,8 @@
#define PCIE500_CFGADDR 0x0
#define PCIE500_CFGDATA 0x4
#define PCIE500_REG_BASE 0xC00
#define PCIE500_REG_SIZE (0x1000 - PCIE500_REG_BASE)
#define PCIE500_ALL_SIZE 0x1000
#define PCIE500_REG_SIZE (PCIE500_ALL_SIZE - PCIE500_REG_BASE)
#define PPCE500_PCI_CONFIG_ADDR 0x0
#define PPCE500_PCI_CONFIG_DATA 0x4
......@@ -73,11 +73,15 @@ struct pci_inbound {
};
struct PPCE500PCIState {
PCIHostState pci_state;
struct pci_outbound pob[PPCE500_PCI_NR_POBS];
struct pci_inbound pib[PPCE500_PCI_NR_PIBS];
uint32_t gasket_time;
PCIHostState pci_state;
PCIDevice *pci_dev;
qemu_irq irq[4];
/* mmio maps */
int cfgaddr;
int cfgdata;
int reg;
};
typedef struct PPCE500PCIState PPCE500PCIState;
......@@ -250,7 +254,6 @@ static const VMStateDescription vmstate_ppce500_pci = {
.minimum_version_id = 1,
.minimum_version_id_old = 1,
.fields = (VMStateField[]) {
VMSTATE_PCI_DEVICE_POINTER(pci_dev, PPCE500PCIState),
VMSTATE_STRUCT_ARRAY(pob, PPCE500PCIState, PPCE500_PCI_NR_POBS, 1,
vmstate_pci_outbound, struct pci_outbound),
VMSTATE_STRUCT_ARRAY(pib, PPCE500PCIState, PPCE500_PCI_NR_PIBS, 1,
......@@ -260,60 +263,73 @@ static const VMStateDescription vmstate_ppce500_pci = {
}
};
PCIBus *ppce500_pci_init(qemu_irq pci_irqs[4], target_phys_addr_t registers)
static void e500_pci_map(SysBusDevice *dev, target_phys_addr_t base)
{
PCIHostState *h = FROM_SYSBUS(PCIHostState, sysbus_from_qdev(dev));
PPCE500PCIState *s = DO_UPCAST(PPCE500PCIState, pci_state, h);
cpu_register_physical_memory(base + PCIE500_CFGADDR, 4, s->cfgaddr);
cpu_register_physical_memory(base + PCIE500_CFGDATA, 4, s->cfgdata);
cpu_register_physical_memory(base + PCIE500_REG_BASE, PCIE500_REG_SIZE,
s->reg);
}
static int e500_pcihost_initfn(SysBusDevice *dev)
{
PCIHostState *h;
PPCE500PCIState *s;
PCIBus *b;
int i;
h = FROM_SYSBUS(PCIHostState, sysbus_from_qdev(dev));
s = DO_UPCAST(PPCE500PCIState, pci_state, h);
for (i = 0; i < ARRAY_SIZE(s->irq); i++) {
sysbus_init_irq(dev, &s->irq[i]);
}
b = pci_register_bus(&s->pci_state.busdev.qdev, NULL, mpc85xx_pci_set_irq,
mpc85xx_pci_map_irq, s->irq, PCI_DEVFN(0x11, 0), 4);
s->pci_state.bus = b;
pci_create_simple(b, 0, "e500-host-bridge");
s->cfgaddr = pci_host_conf_register_mmio(&s->pci_state, DEVICE_BIG_ENDIAN);
s->cfgdata = pci_host_data_register_mmio(&s->pci_state,
DEVICE_LITTLE_ENDIAN);
s->reg = cpu_register_io_memory(e500_pci_reg_read, e500_pci_reg_write, s,
DEVICE_BIG_ENDIAN);
sysbus_init_mmio_cb(dev, PCIE500_ALL_SIZE, e500_pci_map);
return 0;
}
static int e500_host_bridge_initfn(PCIDevice *dev)
{
pci_config_set_vendor_id(dev->config, PCI_VENDOR_ID_FREESCALE);
pci_config_set_device_id(dev->config, PCI_DEVICE_ID_MPC8533E);
pci_config_set_class(dev->config, PCI_CLASS_PROCESSOR_POWERPC);
return 0;
}
static PCIDeviceInfo e500_host_bridge_info = {
.qdev.name = "e500-host-bridge",
.qdev.desc = "Host bridge",
.qdev.size = sizeof(PCIDevice),
.init = e500_host_bridge_initfn,
};
static SysBusDeviceInfo e500_pcihost_info = {
.init = e500_pcihost_initfn,
.qdev.name = "e500-pcihost",
.qdev.size = sizeof(PPCE500PCIState),
.qdev.vmsd = &vmstate_ppce500_pci,
};
static void e500_pci_register(void)
{
PPCE500PCIState *controller;
PCIDevice *d;
int index;
static int ppce500_pci_id;
controller = qemu_mallocz(sizeof(PPCE500PCIState));
controller->pci_state.bus = pci_register_bus(NULL, "pci",
mpc85xx_pci_set_irq,
mpc85xx_pci_map_irq,
pci_irqs, PCI_DEVFN(0x11, 0),
4);
d = pci_register_device(controller->pci_state.bus,
"host bridge", sizeof(PCIDevice),
0, NULL, NULL);
pci_config_set_vendor_id(d->config, PCI_VENDOR_ID_FREESCALE);
pci_config_set_device_id(d->config, PCI_DEVICE_ID_MPC8533E);
pci_config_set_class(d->config, PCI_CLASS_PROCESSOR_POWERPC);
controller->pci_dev = d;
/* CFGADDR */
index = pci_host_conf_register_mmio(&controller->pci_state,
DEVICE_BIG_ENDIAN);
if (index < 0)
goto free;
cpu_register_physical_memory(registers + PCIE500_CFGADDR, 4, index);
/* CFGDATA */
index = pci_host_data_register_mmio(&controller->pci_state,
DEVICE_BIG_ENDIAN);
if (index < 0)
goto free;
cpu_register_physical_memory(registers + PCIE500_CFGDATA, 4, index);
index = cpu_register_io_memory(e500_pci_reg_read,
e500_pci_reg_write, controller,
DEVICE_NATIVE_ENDIAN);
if (index < 0)
goto free;
cpu_register_physical_memory(registers + PCIE500_REG_BASE,
PCIE500_REG_SIZE, index);
/* XXX load/save code not tested. */
vmstate_register(&d->qdev, ppce500_pci_id++, &vmstate_ppce500_pci,
controller);
return controller->pci_state.bus;
free:
printf("%s error\n", __func__);
qemu_free(controller);
return NULL;
sysbus_register_withprop(&e500_pcihost_info);
pci_qdev_register(&e500_host_bridge_info);
}
device_init(e500_pci_register);
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册