Arm display emulation.

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1746 c046a42c-6fe2-441c-8c8c-71466251a162

Makefile.target

@@ -339,7 +339,7 @@ VL_OBJS+= slavio_timer.o slavio_serial.o slavio_misc.o fdc.o esp.o
 endif
 endif
 ifeq ($(TARGET_BASE_ARCH), arm)
-VL_OBJS+= integratorcp.o ps2.o smc91c111.o
+VL_OBJS+= integratorcp.o ps2.o smc91c111.o pl110.o
 endif
 ifdef CONFIG_GDBSTUB
 VL_OBJS+=gdbstub.o 
@@ -439,6 +439,7 @@ endif
 
 ifeq ($(TARGET_ARCH), arm)
 op.o: op.c op_template.h
+pl110.o: pl110_template.h
 endif
 
 ifeq ($(TARGET_BASE_ARCH), sparc)

hw/integratorcp.c

@@ -27,8 +27,11 @@ void irq_info(void)
 {
 }
 
+static void *lcd;
+
 void vga_update_display(void)
 {
+    pl110_update_display(lcd);
 }
 
 void vga_screen_dump(const char *filename)
@@ -37,6 +40,7 @@ void vga_screen_dump(const char *filename)
 
 void vga_invalidate_display(void)
 {
+    pl110_invalidate_display(lcd);
 }
 
 void DMA_run (void)
@@ -1204,6 +1208,7 @@ static void integratorcp_init(int ram_size, int vga_ram_size, int boot_device,
             exit (1);
         }
     }
+    lcd = pl110_init(ds, 0xc0000000, pic, 22);
 
     /* Load the kernel.  */
     if (!kernel_filename) {

hw/pl110.c

+/* 
+ * Arm PrimeCell PL110 Color LCD Controller
+ *
+ * Copyright (c) 2005 CodeSourcery, LLC.
+ * Written by Paul Brook
+ *
+ * This code is licenced under the GNU LGPL
+ */
+
+#include "vl.h"
+
+#define PL110_CR_EN   0x001
+#define PL110_CR_BEBO 0x200
+#define PL110_CR_BEPO 0x400
+#define PL110_CR_PWR  0x800
+
+enum pl110_bppmode
+{
+    BPP_1,
+    BPP_2,
+    BPP_4,
+    BPP_8,
+    BPP_16,
+    BPP_32
+};
+
+typedef struct {
+    uint32_t base;
+    DisplayState *ds;
+    void *pic;
+    uint32_t timing[4];
+    uint32_t cr;
+    uint32_t upbase;
+    uint32_t lpbase;
+    uint32_t int_status;
+    uint32_t int_mask;
+    int cols;
+    int rows;
+    enum pl110_bppmode bpp;
+    int invalidate;
+    uint32_t pallette[256];
+    uint32_t raw_pallette[128];
+    int irq;
+} pl110_state;
+
+static const unsigned char pl110_id[] =
+{ 0x10, 0x11, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 };
+
+static inline uint32_t rgb_to_pixel8(unsigned int r, unsigned int g, unsigned b)
+{
+    return ((r >> 5) << 5) | ((g >> 5) << 2) | (b >> 6);
+}
+
+static inline uint32_t rgb_to_pixel15(unsigned int r, unsigned int g, unsigned b)
+{
+    return ((r >> 3) << 10) | ((g >> 3) << 5) | (b >> 3);
+}
+
+static inline uint32_t rgb_to_pixel16(unsigned int r, unsigned int g, unsigned b)
+{
+    return ((r >> 3) << 11) | ((g >> 2) << 5) | (b >> 3);
+}
+
+static inline uint32_t rgb_to_pixel24(unsigned int r, unsigned int g, unsigned b)
+{
+    return (r << 16) | (g << 8) | b;
+}
+
+static inline uint32_t rgb_to_pixel32(unsigned int r, unsigned int g, unsigned b)
+{
+    return (r << 16) | (g << 8) | b;
+}
+
+typedef void (*drawfn)(uint32_t *, uint8_t *, const uint8_t *, int);
+
+#define BITS 8
+#include "pl110_template.h"
+#define BITS 15
+#include "pl110_template.h"
+#define BITS 16
+#include "pl110_template.h"
+#define BITS 24
+#include "pl110_template.h"
+#define BITS 32
+#include "pl110_template.h"
+
+static int pl110_enabled(pl110_state *s)
+{
+  return (s->cr & PL110_CR_EN) && (s->cr & PL110_CR_PWR);
+}
+
+void pl110_update_display(void *opaque)
+{
+    pl110_state *s = (pl110_state *)opaque;
+    drawfn* fntable;
+    drawfn fn;
+    uint32_t *pallette;
+    uint32_t addr;
+    uint32_t base;
+    int dest_width;
+    int src_width;
+    uint8_t *dest;
+    uint8_t *src;
+    int first, last;
+    int dirty, new_dirty;
+    int i;
+
+    if (!pl110_enabled(s))
+        return;
+    
+    switch (s->ds->depth) {
+    case 8:
+        fntable = pl110_draw_fn_8;
+        dest_width = 1;
+        break;
+    case 15:
+        fntable = pl110_draw_fn_15;
+        dest_width = 2;
+        break;
+    case 16:
+        fntable = pl110_draw_fn_16;
+        dest_width = 2;
+        break;
+    case 24:
+        fntable = pl110_draw_fn_24;
+        dest_width = 3;
+        break;
+    case 32:
+        fntable = pl110_draw_fn_32;
+        dest_width = 4;
+        break;
+    default:
+        fprintf(stderr, "qemu: Bad color depth\n");
+        exit(1);
+    }
+    if (s->cr & PL110_CR_BEBO)
+      fn = fntable[s->bpp + 6];
+    else if (s->cr & PL110_CR_BEPO)
+      fn = fntable[s->bpp + 12];
+    else
+      fn = fntable[s->bpp];
+    
+    src_width = s->cols;
+    switch (s->bpp) {
+    case BPP_1:
+        src_width >>= 3;
+        break;
+    case BPP_2:
+        src_width >>= 2;
+        break;
+    case BPP_4:
+        src_width >>= 1;
+        break;
+    case BPP_8:
+        break;
+    case BPP_16:
+        src_width <<= 1;
+        break;
+    case BPP_32:
+        src_width <<= 2;
+        break;
+    }
+    dest_width *= s->cols;
+    pallette = s->pallette;
+    base = s->upbase;
+    /* HACK: Arm aliases physical memory at 0x80000000.  */
+    if (base > 0x80000000)
+        base -= 0x80000000;
+    src = phys_ram_base + base;
+    dest = s->ds->data;
+    first = -1;
+    addr = base;
+
+    dirty = cpu_physical_memory_get_dirty(addr, VGA_DIRTY_FLAG);
+    for (i = 0; i < s->rows; i++) {
+        new_dirty = 0;
+        if ((addr & TARGET_PAGE_MASK) + src_width >= TARGET_PAGE_SIZE) {
+            uint32_t tmp;
+            for (tmp = 0; tmp < src_width; tmp += TARGET_PAGE_SIZE) {
+                new_dirty |= cpu_physical_memory_get_dirty(addr + tmp,
+                                                           VGA_DIRTY_FLAG);
+            }
+        }
+
+        if (dirty || new_dirty || s->invalidate) {
+            fn(pallette, dest, src, s->cols);
+            if (first == -1)
+                first = i;
+            last = i;
+        }
+        dirty = new_dirty;
+        addr += src_width;
+        dest += dest_width;
+        src += src_width;
+    }
+    if (first < 0)
+      return;
+
+    s->invalidate = 0;
+    cpu_physical_memory_reset_dirty(base + first * src_width,
+                                    base + (last + 1) * src_width,
+                                    VGA_DIRTY_FLAG);
+    dpy_update(s->ds, 0, first, s->cols, last - first + 1);
+}
+
+void pl110_invalidate_display(void * opaque)
+{
+    pl110_state *s = (pl110_state *)opaque;
+    s->invalidate = 1;
+}
+
+static void pl110_update_pallette(pl110_state *s, int n)
+{
+    int i;
+    uint32_t raw;
+    unsigned int r, g, b;
+
+    raw = s->raw_pallette[n];
+    n <<= 1;
+    for (i = 0; i < 2; i++) {
+        r = (raw & 0x1f) << 3;
+        raw >>= 5;
+        g = (raw & 0x1f) << 3;
+        raw >>= 5;
+        b = (raw & 0x1f) << 3;
+        /* The I bit is ignored.  */
+        raw >>= 6;
+        switch (s->ds->depth) {
+        case 8:
+            s->pallette[n] = rgb_to_pixel8(r, g, b);
+            break;
+        case 15:
+            s->pallette[n] = rgb_to_pixel15(r, g, b);
+            break;
+        case 16:
+            s->pallette[n] = rgb_to_pixel16(r, g, b);
+            break;
+        case 24:
+        case 32:
+            s->pallette[n] = rgb_to_pixel32(r, g, b);
+            break;
+        }
+        n++;
+    }
+}
+
+static void pl110_resize(pl110_state *s, int width, int height)
+{
+    if (width != s->cols || height != s->rows) {
+        if (pl110_enabled(s)) {
+            dpy_resize(s->ds, s->cols, s->rows);
+        }
+    }
+    s->cols = width;
+    s->rows = height;
+}
+
+/* Update interrupts.  */
+static void pl110_update(pl110_state *s)
+{
+  /* TODO: Implement interrupts.  */
+}
+
+static uint32_t pl110_read(void *opaque, target_phys_addr_t offset)
+{
+    pl110_state *s = (pl110_state *)opaque;
+
+    offset -= s->base;
+    if (offset >= 0xfe0 && offset < 0x1000) {
+        return pl110_id[(offset - 0xfe0) >> 2];
+    }
+    if (offset >= 0x200 && offset < 0x400) {
+        return s->raw_pallette[(offset - 0x200) >> 2];
+    }
+    switch (offset >> 2) {
+    case 0: /* LCDTiming0 */
+        return s->timing[0];
+    case 1: /* LCDTiming1 */
+        return s->timing[1];
+    case 2: /* LCDTiming2 */
+        return s->timing[2];
+    case 3: /* LCDTiming3 */
+        return s->timing[3];
+    case 4: /* LCDUPBASE */
+        return s->upbase;
+    case 5: /* LCDLPBASE */
+        return s->lpbase;
+    case 6: /* LCDIMSC */
+        return s->int_mask;
+    case 7: /* LCDControl */
+        return s->cr;
+    case 8: /* LCDRIS */
+        return s->int_status;
+    case 9: /* LCDMIS */
+        return s->int_status & s->int_mask;
+    case 11: /* LCDUPCURR */
+        /* TODO: Implement vertical refresh.  */
+        return s->upbase;
+    case 12: /* LCDLPCURR */
+        return s->lpbase;
+    default:
+        cpu_abort (cpu_single_env, "pl110_read: Bad offset %x\n", offset);
+        return 0;
+    }
+}
+
+static void pl110_write(void *opaque, target_phys_addr_t offset,
+                        uint32_t val)
+{
+    pl110_state *s = (pl110_state *)opaque;
+    int n;
+
+    /* For simplicity invalidate the display whenever a control register
+       is writen to.  */
+    s->invalidate = 1;
+    offset -= s->base;
+    if (offset >= 0x200 && offset < 0x400) {
+        /* Pallette.  */
+        n = (offset - 0x200) >> 2;
+        s->raw_pallette[(offset - 0x200) >> 2] = val;
+        pl110_update_pallette(s, n);
+    }
+    switch (offset >> 2) {
+    case 0: /* LCDTiming0 */
+        s->timing[0] = val;
+        n = ((val & 0xfc) + 4) * 4;
+        pl110_resize(s, n, s->rows);
+        break;
+    case 1: /* LCDTiming1 */
+        s->timing[1] = val;
+        n = (val & 0x3ff) + 1;
+        pl110_resize(s, s->cols, n);
+        break;
+    case 2: /* LCDTiming2 */
+        s->timing[2] = val;
+        break;
+    case 3: /* LCDTiming3 */
+        s->timing[3] = val;
+        break;
+    case 4: /* LCDUPBASE */
+        s->upbase = val;
+        break;
+    case 5: /* LCDLPBASE */
+        s->lpbase = val;
+        break;
+    case 6: /* LCDIMSC */
+        s->int_mask = val;
+        pl110_update(s);
+        break;
+    case 7: /* LCDControl */
+        s->cr = val;
+        s->bpp = (val >> 1) & 7;
+        if (pl110_enabled(s)) {
+            dpy_resize(s->ds, s->cols, s->rows);
+        }
+        break;
+    case 10: /* LCDICR */
+        s->int_status &= ~val;
+        pl110_update(s);
+        break;
+    default:
+        cpu_abort (cpu_single_env, "pl110_write: Bad offset %x\n", offset);
+    }
+}
+
+static CPUReadMemoryFunc *pl110_readfn[] = {
+   pl110_read,
+   pl110_read,
+   pl110_read
+};
+
+static CPUWriteMemoryFunc *pl110_writefn[] = {
+   pl110_write,
+   pl110_write,
+   pl110_write
+};
+
+void *pl110_init(DisplayState *ds, uint32_t base, void *pic, int irq)
+{
+    pl110_state *s;
+    int iomemtype;
+
+    s = (pl110_state *)qemu_mallocz(sizeof(pl110_state));
+    iomemtype = cpu_register_io_memory(0, pl110_readfn,
+                                       pl110_writefn, s);
+    cpu_register_physical_memory(base, 0x007fffff, iomemtype);
+    s->base = base;
+    s->ds = ds;
+    s->pic = pic;
+    s->irq = irq;
+    /* ??? Save/restore.  */
+    return s;
+}

hw/pl110_template.h

+/* 
+ * Arm PrimeCell PL110 Color LCD Controller
+ *
+ * Copyright (c) 2005 CodeSourcery, LLC.
+ * Written by Paul Brook
+ *
+ * This code is licenced under the GNU LGPL
+ *
+ * Framebuffer format conversion routines.
+ */
+
+#ifndef ORDER
+
+#if BITS == 8
+#define COPY_PIXEL(to, from) *(to++) = from
+#elif BITS == 15 || BITS == 16
+#define COPY_PIXEL(to, from) *(uint16_t *)to = from; to += 2;
+#elif BITS == 24 
+#define COPY_PIXEL(to, from) \
+  *(to++) = from; *(to++) = (from) >> 8; *(to++) = (from) >> 16
+#elif BITS == 32
+#define COPY_PIXEL(to, from) *(uint32_t *)to = from; to += 4;
+#else
+#error unknown bit depth
+#endif
+
+#define ORDER 0
+#include "pl110_template.h"
+#define ORDER 1
+#include "pl110_template.h"
+#define ORDER 2
+#include "pl110_template.h"
+
+static drawfn glue(pl110_draw_fn_,BITS)[18] =
+{
+    glue(pl110_draw_line1_lblp,BITS),
+    glue(pl110_draw_line2_lblp,BITS),
+    glue(pl110_draw_line4_lblp,BITS),
+    glue(pl110_draw_line8_lblp,BITS),
+    glue(pl110_draw_line16_lblp,BITS),
+    glue(pl110_draw_line32_lblp,BITS),
+
+    glue(pl110_draw_line1_bbbp,BITS),
+    glue(pl110_draw_line2_bbbp,BITS),
+    glue(pl110_draw_line4_bbbp,BITS),
+    glue(pl110_draw_line8_bbbp,BITS),
+    glue(pl110_draw_line16_bbbp,BITS),
+    glue(pl110_draw_line32_bbbp,BITS),
+
+    glue(pl110_draw_line1_lbbp,BITS),
+    glue(pl110_draw_line2_lbbp,BITS),
+    glue(pl110_draw_line4_lbbp,BITS),
+    glue(pl110_draw_line8_lbbp,BITS),
+    glue(pl110_draw_line16_lbbp,BITS),
+    glue(pl110_draw_line32_lbbp,BITS)
+};
+
+#undef BITS
+#undef COPY_PIXEL
+
+#else
+
+#if ORDER == 0
+#define NAME glue(lblp, BITS)
+#ifdef WORDS_BIGENDIAN
+#define SWAP_WORDS 1
+#endif
+#elif ORDER == 1
+#define NAME glue(bbbp, BITS)
+#ifndef WORDS_BIGENDIAN
+#define SWAP_WORDS 1
+#endif
+#else
+#define SWAP_PIXELS 1
+#define NAME glue(lbbp, BITS)
+#ifdef WORDS_BIGENDIAN
+#define SWAP_WORDS 1
+#endif
+#endif
+
+#define FN_2(x, y) FN(x, y) FN(x+1, y)
+#define FN_4(x, y) FN_2(x, y) FN_2(x+1, y)
+#define FN_8(y) FN_4(0, y) FN_4(4, y)
+
+static void glue(pl110_draw_line1_,NAME)(uint32_t *pallette, uint8_t *d, const uint8_t *src, int width)
+{
+    uint32_t data;
+    while (width > 0) {
+        data = *(uint32_t *)src;
+#ifdef SWAP_PIXELS
+#define FN(x, y) COPY_PIXEL(d, pallette[(data >> (y + 7 - (x))) & 1]);
+#else
+#define FN(x, y) COPY_PIXEL(d, pallette[(data >> ((x) + y)) & 1]);
+#endif
+#ifdef SWAP_BYTES
+        FN_8(24)
+        FN_8(16)
+        FN_8(8)
+        FN_8(0)
+#else
+        FN_8(0)
+        FN_8(8)
+        FN_8(16)
+        FN_8(24)
+#endif
+#undef FN
+        width -= 32;
+        src += 4;
+    }
+}
+
+static void glue(pl110_draw_line2_,NAME)(uint32_t *pallette, uint8_t *d, const uint8_t *src, int width)
+{
+    uint32_t data;
+    while (width > 0) {
+        data = *(uint32_t *)src;
+#ifdef SWAP_PIXELS
+#define FN(x, y) COPY_PIXEL(d, pallette[(data >> (y + 6 - (x)*2)) & 3]);
+#else
+#define FN(x, y) COPY_PIXEL(d, pallette[(data >> ((x)*2 + y)) & 3]);
+#endif
+#ifdef SWAP_BYTES
+        FN_4(0, 24)
+        FN_4(0, 16)
+        FN_4(0, 8)
+        FN_4(0, 0)
+#else
+        FN_4(0, 0)
+        FN_4(0, 8)
+        FN_4(0, 16)
+        FN_4(0, 24)
+#endif
+#undef FN
+        width -= 16;
+        src += 4;
+    }
+}
+
+static void glue(pl110_draw_line4_,NAME)(uint32_t *pallette, uint8_t *d, const uint8_t *src, int width)
+{
+    uint32_t data;
+    while (width > 0) {
+        data = *(uint32_t *)src;
+#ifdef SWAP_PIXELS
+#define FN(x, y) COPY_PIXEL(d, pallette[(data >> (y + 4 - (x)*4)) & 0xf]);
+#else
+#define FN(x, y) COPY_PIXEL(d, pallette[(data >> ((x)*4 + y)) & 0xf]);
+#endif
+#ifdef SWAP_BYTES
+        FN_2(0, 24)
+        FN_2(0, 16)
+        FN_2(0, 8)
+        FN_2(0, 0)
+#else
+        FN_2(0, 0)
+        FN_2(0, 8)
+        FN_2(0, 16)
+        FN_2(0, 24)
+#endif
+#undef FN
+        width -= 8;
+        src += 4;
+    }
+}
+
+static void glue(pl110_draw_line8_,NAME)(uint32_t *pallette, uint8_t *d, const uint8_t *src, int width)
+{
+    uint32_t data;
+    while (width > 0) {
+        data = *(uint32_t *)src;
+#define FN(x) COPY_PIXEL(d, pallette[(data >> (x)) & 0xff]);
+#ifdef SWAP_BYTES
+        FN(24)
+        FN(16)
+        FN(8)
+        FN(0)
+#else
+        FN(0)
+        FN(8)
+        FN(16)
+        FN(24)
+#endif
+#undef FN
+        width -= 4;
+        src += 4;
+    }
+}
+
+static void glue(pl110_draw_line16_,NAME)(uint32_t *pallette, uint8_t *d, const uint8_t *src, int width)
+{
+    uint32_t data;
+    unsigned int r, g, b;
+    while (width > 0) {
+        data = *(uint32_t *)src;
+#ifdef SWAP_BYTES
+        data = bswap32(data);
+#endif
+#if 0
+        r = data & 0x1f;
+        data >>= 5;
+        g = data & 0x3f;
+        data >>= 6;
+        b = data & 0x1f;
+        data >>= 5;
+#else
+        r = (data & 0x1f) << 3;
+        data >>= 5;
+        g = (data & 0x3f) << 2;
+        data >>= 6;
+        b = (data & 0x1f) << 3;
+        data >>= 5;
+#endif
+        COPY_PIXEL(d, glue(rgb_to_pixel,BITS)(r, g, b));
+        r = (data & 0x1f) << 3;
+        data >>= 5;
+        g = (data & 0x3f) << 2;
+        data >>= 6;
+        b = (data & 0x1f) << 3;
+        data >>= 5;
+        COPY_PIXEL(d, glue(rgb_to_pixel,BITS)(r, g, b));
+        width -= 2;
+        src += 4;
+    }
+}
+
+static void glue(pl110_draw_line32_,NAME)(uint32_t *pallette, uint8_t *d, const uint8_t *src, int width)
+{
+    uint32_t data;
+    unsigned int r, g, b;
+    while (width > 0) {
+        data = *(uint32_t *)src;
+#ifdef SWAP_BYTES
+        r = data & 0xff;
+        g = (data >> 8) & 0xff;
+        b = (data >> 16) & 0xff;
+#else
+        r = (data >> 24) & 0xff;
+        g = (data >> 16) & 0xff;
+        b = (data >> 8) & 0xff;
+#endif
+        COPY_PIXEL(d, glue(rgb_to_pixel,BITS)(r, g, b));
+        width--;
+        src += 4;
+    }
+}
+
+#undef SWAP_PIXELS
+#undef NAME
+#undef SWAP_WORDS
+#undef ORDER
+
+#endif

vl.h

@@ -973,6 +973,11 @@ void ps2_queue(void *, int b);
 /* smc91c111.c */
 void smc91c111_init(NICInfo *, uint32_t, void *, int);
 
+/* pl110.c */
+void *pl110_init(DisplayState *ds, uint32_t base, void *pic, int irq);
+void pl110_update_display(void *opaque);
+void pl110_invalidate_display(void *opaque);
+
 #endif /* defined(QEMU_TOOL) */
 
 /* monitor.c */