提交 b19159e8 编写于 作者: A Anthony Liguori

Revert "PPC: Qdev'ify e500 pci"

This reverts commit 13b7fdef.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
上级 031c0c55
......@@ -73,11 +73,11 @@ struct pci_inbound {
};
struct PPCE500PCIState {
PCIHostState pci_state;
struct pci_outbound pob[PPCE500_PCI_NR_POBS];
struct pci_inbound pib[PPCE500_PCI_NR_PIBS];
uint32_t gasket_time;
uint64_t base_addr;
PCIHostState pci_state;
PCIDevice *pci_dev;
};
typedef struct PPCE500PCIState PPCE500PCIState;
......@@ -221,7 +221,7 @@ static void ppce500_pci_save(QEMUFile *f, void *opaque)
PPCE500PCIState *controller = opaque;
int i;
/* pci_device_save(controller->pci_dev, f); */
pci_device_save(controller->pci_dev, f);
for (i = 0; i < PPCE500_PCI_NR_POBS; i++) {
qemu_put_be32s(f, &controller->pob[i].potar);
......@@ -247,7 +247,7 @@ static int ppce500_pci_load(QEMUFile *f, void *opaque, int version_id)
if (version_id != 1)
return -EINVAL;
/* pci_device_load(controller->pci_dev, f); */
pci_device_load(controller->pci_dev, f);
for (i = 0; i < PPCE500_PCI_NR_POBS; i++) {
qemu_get_be32s(f, &controller->pob[i].potar);
......@@ -269,95 +269,55 @@ static int ppce500_pci_load(QEMUFile *f, void *opaque, int version_id)
PCIBus *ppce500_pci_init(qemu_irq pci_irqs[4], target_phys_addr_t registers)
{
DeviceState *dev;
PCIBus *b;
PCIHostState *h;
PPCE500PCIState *s;
PPCE500PCIState *controller;
PCIDevice *d;
int index;
static int ppce500_pci_id;
dev = qdev_create(NULL, "e500-pcihost");
h = FROM_SYSBUS(PCIHostState, sysbus_from_qdev(dev));
s = DO_UPCAST(PPCE500PCIState, pci_state, h);
qdev_prop_set_uint64(dev, "base_addr", registers);
b = pci_register_bus(&s->pci_state.busdev.qdev, NULL, mpc85xx_pci_set_irq,
mpc85xx_pci_map_irq, pci_irqs, PCI_DEVFN(0x11, 0), 4);
s->pci_state.bus = b;
qdev_init_nofail(dev);
d = pci_create_simple(b, 0, "e500-host-bridge");
/* XXX load/save code not tested. */
register_savevm(&d->qdev, "ppce500_pci", ppce500_pci_id++,
1, ppce500_pci_save, ppce500_pci_load, s);
controller = qemu_mallocz(sizeof(PPCE500PCIState));
return b;
}
controller->pci_state.bus = pci_register_bus(NULL, "pci",
mpc85xx_pci_set_irq,
mpc85xx_pci_map_irq,
pci_irqs, PCI_DEVFN(0x11, 0),
4);
d = pci_register_device(controller->pci_state.bus,
"host bridge", sizeof(PCIDevice),
0, NULL, NULL);
static int e500_pcihost_initfn(SysBusDevice *dev)
{
PCIHostState *h;
PPCE500PCIState *s;
target_phys_addr_t registers;
int index;
pci_config_set_vendor_id(d->config, PCI_VENDOR_ID_FREESCALE);
pci_config_set_device_id(d->config, PCI_DEVICE_ID_MPC8533E);
pci_config_set_class(d->config, PCI_CLASS_PROCESSOR_POWERPC);
h = FROM_SYSBUS(PCIHostState, sysbus_from_qdev(dev));
s = DO_UPCAST(PPCE500PCIState, pci_state, h);
registers = (target_phys_addr_t)s->base_addr;
controller->pci_dev = d;
/* CFGADDR */
index = pci_host_conf_register_mmio(&s->pci_state, 0);
index = pci_host_conf_register_mmio(&controller->pci_state, 0);
if (index < 0)
return -1;
goto free;
cpu_register_physical_memory(registers + PCIE500_CFGADDR, 4, index);
/* CFGDATA */
index = pci_host_data_register_mmio(&s->pci_state, 0);
index = pci_host_data_register_mmio(&controller->pci_state, 0);
if (index < 0)
return -1;
goto free;
cpu_register_physical_memory(registers + PCIE500_CFGDATA, 4, index);
index = cpu_register_io_memory(e500_pci_reg_read,
e500_pci_reg_write, s);
e500_pci_reg_write, controller);
if (index < 0)
return -1;
goto free;
cpu_register_physical_memory(registers + PCIE500_REG_BASE,
PCIE500_REG_SIZE, index);
return 0;
}
static int e500_host_bridge_initfn(PCIDevice *dev)
{
pci_config_set_vendor_id(dev->config, PCI_VENDOR_ID_FREESCALE);
pci_config_set_device_id(dev->config, PCI_DEVICE_ID_MPC8533E);
pci_config_set_class(dev->config, PCI_CLASS_PROCESSOR_POWERPC);
return 0;
}
static PCIDeviceInfo e500_host_bridge_info = {
.qdev.name = "e500-host-bridge",
.qdev.desc = "Host bridge",
.qdev.size = sizeof(PCIDevice),
.qdev.no_user = 1,
.init = e500_host_bridge_initfn,
};
/* XXX load/save code not tested. */
register_savevm(&d->qdev, "ppce500_pci", ppce500_pci_id++,
1, ppce500_pci_save, ppce500_pci_load, controller);
static SysBusDeviceInfo e500_pcihost_info = {
.init = e500_pcihost_initfn,
.qdev.name = "e500-pcihost",
.qdev.size = sizeof(PPCE500PCIState),
.qdev.no_user = 1,
.qdev.props = (Property[]) {
DEFINE_PROP_UINT64("base_addr", PPCE500PCIState, base_addr, 0),
DEFINE_PROP_END_OF_LIST(),
}
};
return controller->pci_state.bus;
static void e500_pci_register(void)
{
sysbus_register_withprop(&e500_pcihost_info);
pci_qdev_register(&e500_host_bridge_info);
free:
printf("%s error\n", __func__);
qemu_free(controller);
return NULL;
}
device_init(e500_pci_register);
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册