target-arm: A64: Implement DC ZVA

Implement the DC ZVA instruction, which clears a block of memory.
The fast path obtains a pointer to the underlying RAM via the TCG TLB
data structure so we can do a direct memset(), with fallback to a
simple byte-store loop in the slow path.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Acked-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>

include/exec/softmmu_exec.h

@@ -162,3 +162,55 @@
 #define stw(p, v) stw_data(p, v)
 #define stl(p, v) stl_data(p, v)
 #define stq(p, v) stq_data(p, v)
+
+/**
+ * tlb_vaddr_to_host:
+ * @env: CPUArchState
+ * @addr: guest virtual address to look up
+ * @access_type: 0 for read, 1 for write, 2 for execute
+ * @mmu_idx: MMU index to use for lookup
+ *
+ * Look up the specified guest virtual index in the TCG softmmu TLB.
+ * If the TLB contains a host virtual address suitable for direct RAM
+ * access, then return it. Otherwise (TLB miss, TLB entry is for an
+ * I/O access, etc) return NULL.
+ *
+ * This is the equivalent of the initial fast-path code used by
+ * TCG backends for guest load and store accesses.
+ */
+static inline void *tlb_vaddr_to_host(CPUArchState *env, target_ulong addr,
+                                      int access_type, int mmu_idx)
+{
+    int index = (addr >> TARGET_PAGE_BITS) & (CPU_TLB_SIZE - 1);
+    CPUTLBEntry *tlbentry = &env->tlb_table[mmu_idx][index];
+    target_ulong tlb_addr;
+    uintptr_t haddr;
+
+    switch (access_type) {
+    case 0:
+        tlb_addr = tlbentry->addr_read;
+        break;
+    case 1:
+        tlb_addr = tlbentry->addr_write;
+        break;
+    case 2:
+        tlb_addr = tlbentry->addr_code;
+        break;
+    default:
+        g_assert_not_reached();
+    }
+
+    if ((addr & TARGET_PAGE_MASK)
+        != (tlb_addr & (TARGET_PAGE_MASK | TLB_INVALID_MASK))) {
+        /* TLB entry is for a different page */
+        return NULL;
+    }
+
+    if (tlb_addr & ~TARGET_PAGE_MASK) {
+        /* IO access */
+        return NULL;
+    }
+
+    haddr = addr + env->tlb_table[mmu_idx][index].addend;
+    return (void *)haddr;
+}

target-arm/cpu-qom.h

@@ -150,6 +150,8 @@ typedef struct ARMCPU {
     uint32_t reset_cbar;
     uint32_t reset_auxcr;
     bool reset_hivecs;
+    /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */
+    uint32_t dcz_blocksize;
 } ARMCPU;
 
 #define TYPE_AARCH64_CPU "aarch64-cpu"

target-arm/cpu.h

@@ -758,7 +758,8 @@ static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid)
 #define ARM_CP_WFI (ARM_CP_SPECIAL | (2 << 8))
 #define ARM_CP_NZCV (ARM_CP_SPECIAL | (3 << 8))
 #define ARM_CP_CURRENTEL (ARM_CP_SPECIAL | (4 << 8))
-#define ARM_LAST_SPECIAL ARM_CP_CURRENTEL
+#define ARM_CP_DC_ZVA (ARM_CP_SPECIAL | (5 << 8))
+#define ARM_LAST_SPECIAL ARM_CP_DC_ZVA
 /* Used only as a terminator for ARMCPRegInfo lists */
 #define ARM_CP_SENTINEL 0xffff
 /* Mask of only the flag bits in a type field */

target-arm/cpu64.c

@@ -46,6 +46,7 @@ static void aarch64_any_initfn(Object *obj)
     set_feature(&cpu->env, ARM_FEATURE_V7MP);
     set_feature(&cpu->env, ARM_FEATURE_AARCH64);
     cpu->ctr = 0x80030003; /* 32 byte I and D cacheline size, VIPT icache */
+    cpu->dcz_blocksize = 7; /*  512 bytes */
 }
 #endif
 

target-arm/helper.c

@@ -10,6 +10,8 @@
 #include <zlib.h> /* For crc32 */
 
 #ifndef CONFIG_USER_ONLY
+#include "exec/softmmu_exec.h"
+
 static inline int get_phys_addr(CPUARMState *env, target_ulong address,
                                 int access_type, int is_user,
                                 hwaddr *phys_ptr, int *prot,
@@ -1745,6 +1747,29 @@ static void tlbi_aa64_asid_write(CPUARMState *env, const ARMCPRegInfo *ri,
     tlb_flush(CPU(cpu), asid == 0);
 }
 
+static CPAccessResult aa64_zva_access(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+    /* We don't implement EL2, so the only control on DC ZVA is the
+     * bit in the SCTLR which can prohibit access for EL0.
+     */
+    if (arm_current_pl(env) == 0 && !(env->cp15.c1_sys & SCTLR_DZE)) {
+        return CP_ACCESS_TRAP;
+    }
+    return CP_ACCESS_OK;
+}
+
+static uint64_t aa64_dczid_read(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+    ARMCPU *cpu = arm_env_get_cpu(env);
+    int dzp_bit = 1 << 4;
+
+    /* DZP indicates whether DC ZVA access is allowed */
+    if (aa64_zva_access(env, NULL) != CP_ACCESS_OK) {
+        dzp_bit = 0;
+    }
+    return cpu->dcz_blocksize | dzp_bit;
+}
+
 static const ARMCPRegInfo v8_cp_reginfo[] = {
     /* Minimal set of EL0-visible registers. This will need to be expanded
      * significantly for system emulation of AArch64 CPUs.
@@ -1764,13 +1789,18 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
     { .name = "FPSR", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .opc2 = 1, .crn = 4, .crm = 4,
       .access = PL0_RW, .readfn = aa64_fpsr_read, .writefn = aa64_fpsr_write },
-    /* Prohibit use of DC ZVA. OPTME: implement DC ZVA and allow its use.
-     * For system mode the DZP bit here will need to be computed, not constant.
-     */
     { .name = "DCZID_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .opc2 = 7, .crn = 0, .crm = 0,
-      .access = PL0_R, .type = ARM_CP_CONST,
-      .resetvalue = 0x10 },
+      .access = PL0_R, .type = ARM_CP_NO_MIGRATE,
+      .readfn = aa64_dczid_read },
+    { .name = "DC_ZVA", .state = ARM_CP_STATE_AA64,
+      .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 4, .opc2 = 1,
+      .access = PL0_W, .type = ARM_CP_DC_ZVA,
+#ifndef CONFIG_USER_ONLY
+      /* Avoid overhead of an access check that always passes in user-mode */
+      .accessfn = aa64_zva_access,
+#endif
+    },
     { .name = "CURRENTEL", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 0, .opc2 = 2, .crn = 4, .crm = 2,
       .access = PL1_R, .type = ARM_CP_CURRENTEL },
@@ -3930,6 +3960,88 @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t reg, uint32_t val)
 
 #endif
 
+void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in)
+{
+    /* Implement DC ZVA, which zeroes a fixed-length block of memory.
+     * Note that we do not implement the (architecturally mandated)
+     * alignment fault for attempts to use this on Device memory
+     * (which matches the usual QEMU behaviour of not implementing either
+     * alignment faults or any memory attribute handling).
+     */
+
+    ARMCPU *cpu = arm_env_get_cpu(env);
+    uint64_t blocklen = 4 << cpu->dcz_blocksize;
+    uint64_t vaddr = vaddr_in & ~(blocklen - 1);
+
+#ifndef CONFIG_USER_ONLY
+    {
+        /* Slightly awkwardly, QEMU's TARGET_PAGE_SIZE may be less than
+         * the block size so we might have to do more than one TLB lookup.
+         * We know that in fact for any v8 CPU the page size is at least 4K
+         * and the block size must be 2K or less, but TARGET_PAGE_SIZE is only
+         * 1K as an artefact of legacy v5 subpage support being present in the
+         * same QEMU executable.
+         */
+        int maxidx = DIV_ROUND_UP(blocklen, TARGET_PAGE_SIZE);
+        void *hostaddr[maxidx];
+        int try, i;
+
+        for (try = 0; try < 2; try++) {
+
+            for (i = 0; i < maxidx; i++) {
+                hostaddr[i] = tlb_vaddr_to_host(env,
+                                                vaddr + TARGET_PAGE_SIZE * i,
+                                                1, cpu_mmu_index(env));
+                if (!hostaddr[i]) {
+                    break;
+                }
+            }
+            if (i == maxidx) {
+                /* If it's all in the TLB it's fair game for just writing to;
+                 * we know we don't need to update dirty status, etc.
+                 */
+                for (i = 0; i < maxidx - 1; i++) {
+                    memset(hostaddr[i], 0, TARGET_PAGE_SIZE);
+                }
+                memset(hostaddr[i], 0, blocklen - (i * TARGET_PAGE_SIZE));
+                return;
+            }
+            /* OK, try a store and see if we can populate the tlb. This
+             * might cause an exception if the memory isn't writable,
+             * in which case we will longjmp out of here. We must for
+             * this purpose use the actual register value passed to us
+             * so that we get the fault address right.
+             */
+            helper_ret_stb_mmu(env, vaddr_in, 0, cpu_mmu_index(env), GETRA());
+            /* Now we can populate the other TLB entries, if any */
+            for (i = 0; i < maxidx; i++) {
+                uint64_t va = vaddr + TARGET_PAGE_SIZE * i;
+                if (va != (vaddr_in & TARGET_PAGE_MASK)) {
+                    helper_ret_stb_mmu(env, va, 0, cpu_mmu_index(env), GETRA());
+                }
+            }
+        }
+
+        /* Slow path (probably attempt to do this to an I/O device or
+         * similar, or clearing of a block of code we have translations
+         * cached for). Just do a series of byte writes as the architecture
+         * demands. It's not worth trying to use a cpu_physical_memory_map(),
+         * memset(), unmap() sequence here because:
+         *  + we'd need to account for the blocksize being larger than a page
+         *  + the direct-RAM access case is almost always going to be dealt
+         *    with in the fastpath code above, so there's no speed benefit
+         *  + we would have to deal with the map returning NULL because the
+         *    bounce buffer was in use
+         */
+        for (i = 0; i < blocklen; i++) {
+            helper_ret_stb_mmu(env, vaddr + i, 0, cpu_mmu_index(env), GETRA());
+        }
+    }
+#else
+    memset(g2h(vaddr), 0, blocklen);
+#endif
+}
+
 /* Note that signed overflow is undefined in C.  The following routines are
    careful to use unsigned types where modulo arithmetic is required.
    Failure to do so _will_ break on newer gcc.  */

target-arm/helper.h

@@ -515,6 +515,7 @@ DEF_HELPER_4(crypto_aesmc, void, env, i32, i32, i32)
 
 DEF_HELPER_FLAGS_3(crc32, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32)
 DEF_HELPER_FLAGS_3(crc32c, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32)
+DEF_HELPER_2(dc_zva, void, env, i64)
 
 #ifdef TARGET_AARCH64
 #include "helper-a64.h"

target-arm/translate-a64.c

@@ -1335,6 +1335,11 @@ static void handle_sys(DisasContext *s, uint32_t insn, bool isread,
         tcg_rt = cpu_reg(s, rt);
         tcg_gen_movi_i64(tcg_rt, s->current_pl << 2);
         return;
+    case ARM_CP_DC_ZVA:
+        /* Writes clear the aligned block of memory which rt points into. */
+        tcg_rt = cpu_reg(s, rt);
+        gen_helper_dc_zva(cpu_env, tcg_rt);
+        return;
     default:
         break;
     }