hw/net/can: interrupt cleanup

Define two functions to update the interrupt state, and call them
on loadvm.  This removes the need to migrate the state as part of
vmstate_kvaser_pci.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

hw/net/can/can_kvaser_pci.c

@@ -264,10 +264,10 @@ static const VMStateDescription vmstate_kvaser_pci = {
     .minimum_version_id_old = 1,
     .fields = (VMStateField[]) {
         VMSTATE_PCI_DEVICE(dev, KvaserPCIState),
+        /* Load this before sja_state.  */
+        VMSTATE_UINT32(s5920_intcsr, KvaserPCIState),
         VMSTATE_STRUCT(sja_state, KvaserPCIState, 0, vmstate_can_sja,
                        CanSJA1000State),
-        VMSTATE_UINT32(s5920_intcsr, KvaserPCIState),
-        VMSTATE_UINT32(s5920_irqstate, KvaserPCIState),
         VMSTATE_END_OF_LIST()
     }
 };

hw/net/can/can_sja1000.c

@@ -378,6 +378,24 @@ static int frame2buff_bas(const qemu_can_frame *frame, uint8_t *buff)
     return frame->can_dlc + 2;
 }
 
+static void can_sja_update_pel_irq(CanSJA1000State *s)
+{
+    if (s->interrupt_en & s->interrupt_pel) {
+        qemu_irq_raise(s->irq);
+    } else {
+        qemu_irq_lower(s->irq);
+    }
+}
+
+static void can_sja_update_bas_irq(CanSJA1000State *s)
+{
+    if ((s->control >> 1) & s->interrupt_bas) {
+        qemu_irq_raise(s->irq);
+    } else {
+        qemu_irq_lower(s->irq);
+    }
+}
+
 void can_sja_mem_write(CanSJA1000State *s, hwaddr addr, uint64_t val,
                        unsigned size)
 {
@@ -457,9 +475,7 @@ void can_sja_mem_write(CanSJA1000State *s, hwaddr addr, uint64_t val,
                 /* Clear transmit status. */
                 s->status_pel &= ~(1 << 5);
                 s->interrupt_pel |= 0x02;
-                if (s->interrupt_en & 0x02) {
-                    qemu_irq_raise(s->irq);
-                }
+                can_sja_update_pel_irq(s);
             }
             if (0x04 & val) { /* Release Receive Buffer */
                 if (s->rxmsg_cnt <= 0) {
@@ -488,19 +504,13 @@ void can_sja_mem_write(CanSJA1000State *s, hwaddr addr, uint64_t val,
                 if (s->rxmsg_cnt == 0) {
                     s->status_pel &= ~(1 << 0);
                     s->interrupt_pel &= ~(1 << 0);
-                }
-                if ((s->interrupt_en & 0x01) && (s->interrupt_pel == 0)) {
-                    /* no other interrupts. */
-                    qemu_irq_lower(s->irq);
+                    can_sja_update_pel_irq(s);
                 }
             }
             if (0x08 & val) { /* Clear data overrun */
                 s->status_pel &= ~(1 << 1);
                 s->interrupt_pel &= ~(1 << 3);
-                if ((s->interrupt_en & 0x80) && (s->interrupt_pel == 0)) {
-                    /* no other interrupts. */
-                    qemu_irq_lower(s->irq);
-                }
+                can_sja_update_pel_irq(s);
             }
             break;
         case SJA_SR: /* Status register */
@@ -568,9 +578,7 @@ void can_sja_mem_write(CanSJA1000State *s, hwaddr addr, uint64_t val,
                 /* Clear transmit status. */
                 s->status_bas &= ~(1 << 5);
                 s->interrupt_bas |= 0x02;
-                if (s->control & 0x04) {
-                    qemu_irq_raise(s->irq);
-                }
+                can_sja_update_bas_irq(s);
             }
             if (0x04 & val) { /* Release Receive Buffer */
                 if (s->rxmsg_cnt <= 0) {
@@ -593,19 +601,13 @@ void can_sja_mem_write(CanSJA1000State *s, hwaddr addr, uint64_t val,
                 if (s->rxmsg_cnt == 0) {
                     s->status_bas &= ~(1 << 0);
                     s->interrupt_bas &= ~(1 << 0);
-                }
-                if ((s->control & 0x02) && (s->interrupt_bas == 0)) {
-                    /* no other interrupts. */
-                    qemu_irq_lower(s->irq);
+                    can_sja_update_bas_irq(s);
                 }
             }
             if (0x08 & val) { /* Clear data overrun */
                 s->status_bas &= ~(1 << 1);
                 s->interrupt_bas &= ~(1 << 3);
-                if ((s->control & 0x10) && (s->interrupt_bas == 0)) {
-                    /* no other interrupts. */
-                    qemu_irq_lower(s->irq);
-                }
+                can_sja_update_bas_irq(s);
             }
             break;
         case 4:
@@ -654,9 +656,8 @@ uint64_t can_sja_mem_read(CanSJA1000State *s, hwaddr addr, unsigned size)
             s->interrupt_pel = 0;
             if (s->rxmsg_cnt) {
                 s->interrupt_pel |= (1 << 0); /* Receive interrupt. */
-                break;
             }
-            qemu_irq_lower(s->irq);
+            can_sja_update_pel_irq(s);
             break;
         case SJA_IER: /* Interrupt enable register, addr 4 */
             temp = s->interrupt_en;
@@ -704,9 +705,8 @@ uint64_t can_sja_mem_read(CanSJA1000State *s, hwaddr addr, unsigned size)
             s->interrupt_bas = 0;
             if (s->rxmsg_cnt) {
                 s->interrupt_bas |= (1 << 0); /* Receive interrupt. */
-                break;
             }
-            qemu_irq_lower(s->irq);
+            can_sja_update_bas_irq(s);
             break;
         case 4:
             temp = s->code;
@@ -789,13 +789,11 @@ ssize_t can_sja_receive(CanBusClientState *client, const qemu_can_frame *frames,
         if (s->rx_cnt + ret > SJA_RCV_BUF_LEN) { /* Data overrun. */
             s->status_pel |= (1 << 1); /* Overrun status */
             s->interrupt_pel |= (1 << 3);
-            if (s->interrupt_en & (1 << 3)) { /* Overrun interrupt enable */
-                qemu_irq_raise(s->irq);
-            }
             s->status_pel &= ~(1 << 4);
             if (DEBUG_FILTER) {
                 qemu_log("[cansja]: receive FIFO overrun\n");
             }
+            can_sja_update_pel_irq(s);
             return ret;
         }
         s->rx_cnt += ret;
@@ -813,9 +811,7 @@ ssize_t can_sja_receive(CanBusClientState *client, const qemu_can_frame *frames,
         s->interrupt_pel |= 0x01;
         s->status_pel &= ~(1 << 4);
         s->status_pel |= (1 << 0);
-        if (s->interrupt_en & 0x01) { /* Receive Interrupt enable. */
-            qemu_irq_raise(s->irq);
-        }
+        can_sja_update_pel_irq(s);
     } else { /* BasicCAN mode */
 
         /* the CAN controller is receiving a message */
@@ -834,9 +830,7 @@ ssize_t can_sja_receive(CanBusClientState *client, const qemu_can_frame *frames,
             s->status_bas |= (1 << 1); /* Overrun status */
             s->status_bas &= ~(1 << 4);
             s->interrupt_bas |= (1 << 3);
-            if (s->control & (1 << 4)) { /* Overrun interrupt enable */
-                qemu_irq_raise(s->irq);
-            }
+            can_sja_update_bas_irq(s);
             if (DEBUG_FILTER) {
                 qemu_log("[cansja]: receive FIFO overrun\n");
             }
@@ -856,10 +850,8 @@ ssize_t can_sja_receive(CanBusClientState *client, const qemu_can_frame *frames,
 
         s->status_bas |= 0x01; /* Set the Receive Buffer Status. DS-p15 */
         s->status_bas &= ~(1 << 4);
-        s->interrupt_bas |= 0x01;
-        if (s->control & 0x02) { /* Receive Interrupt enable. */
-            qemu_irq_raise(s->irq);
-        }
+        s->interrupt_bas |= (1 << 0);
+        can_sja_update_bas_irq(s);
     }
     return 1;
 }
@@ -909,12 +901,24 @@ const VMStateDescription vmstate_qemu_can_filter = {
     }
 };
 
+static int can_sja_post_load(void *opaque, int version_id)
+{
+    CanSJA1000State *s = opaque;
+    if (s->clock & 0x80) { /* PeliCAN Mode */
+        can_sja_update_pel_irq(s);
+    } else {
+        can_sja_update_bas_irq(s);
+    }
+    return 0;
+}
+
 /* VMState is needed for live migration of QEMU images */
 const VMStateDescription vmstate_can_sja = {
     .name = "can_sja",
     .version_id = 1,
     .minimum_version_id = 1,
     .minimum_version_id_old = 1,
+    .post_load = can_sja_post_load,
     .fields = (VMStateField[]) {
         VMSTATE_UINT8(mode, CanSJA1000State),