提交 91d848eb 编写于 作者: B bellard

disable PCI device for PMAC


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@966 c046a42c-6fe2-441c-8c8c-71466251a162
上级 e2733d20
......@@ -164,6 +164,7 @@ typedef struct IRQ_dst_t {
struct openpic_t {
PCIDevice pci_dev;
int mem_index;
/* Global registers */
uint32_t frep; /* Feature reporting register */
uint32_t glbc; /* Global configuration register */
......@@ -937,7 +938,6 @@ static void openpic_map(PCIDevice *pci_dev, int region_num,
uint32_t addr, uint32_t size, int type)
{
openpic_t *opp;
int opp_io_memory;
DPRINTF("Map OpenPIC\n");
opp = (openpic_t *)pci_dev;
......@@ -953,9 +953,7 @@ static void openpic_map(PCIDevice *pci_dev, int region_num,
/* Per CPU registers */
DPRINTF("Register OPENPIC dst %08x => %08x\n",
addr + 0x20000, addr + 0x20000 + 0x1000 * MAX_CPU);
opp_io_memory = cpu_register_io_memory(0, openpic_read,
openpic_write, opp);
cpu_register_physical_memory(addr, 0x40000, opp_io_memory);
cpu_register_physical_memory(addr, 0x40000, opp->mem_index);
#if 0 // Don't implement ISU for now
opp_io_memory = cpu_register_io_memory(0, openpic_src_read,
openpic_src_write);
......@@ -964,8 +962,7 @@ static void openpic_map(PCIDevice *pci_dev, int region_num,
#endif
}
openpic_t *openpic_init (PCIBus *bus,
uint32_t isu_base, uint32_t idu_base, int nb_cpus)
openpic_t *openpic_init (PCIBus *bus, int *pmem_index, int nb_cpus)
{
openpic_t *opp;
uint8_t *pci_conf;
......@@ -974,25 +971,32 @@ openpic_t *openpic_init (PCIBus *bus,
/* XXX: for now, only one CPU is supported */
if (nb_cpus != 1)
return NULL;
opp = (openpic_t *)pci_register_device(bus, "OpenPIC", sizeof(openpic_t),
-1, NULL, NULL);
if (opp == NULL)
return NULL;
pci_conf = opp->pci_dev.config;
pci_conf[0x00] = 0x14; // IBM MPIC2
pci_conf[0x01] = 0x10;
pci_conf[0x02] = 0xFF;
pci_conf[0x03] = 0xFF;
pci_conf[0x0a] = 0x80; // PIC
pci_conf[0x0b] = 0x08;
pci_conf[0x0e] = 0x00; // header_type
pci_conf[0x3d] = 0x00; // no interrupt pin
/* Register I/O spaces */
pci_register_io_region((PCIDevice *)opp, 0, 0x40000,
PCI_ADDRESS_SPACE_MEM, &openpic_map);
isu_base &= 0xFFFC0000;
if (bus) {
opp = (openpic_t *)pci_register_device(bus, "OpenPIC", sizeof(openpic_t),
-1, NULL, NULL);
if (opp == NULL)
return NULL;
pci_conf = opp->pci_dev.config;
pci_conf[0x00] = 0x14; // IBM MPIC2
pci_conf[0x01] = 0x10;
pci_conf[0x02] = 0xFF;
pci_conf[0x03] = 0xFF;
pci_conf[0x0a] = 0x80; // PIC
pci_conf[0x0b] = 0x08;
pci_conf[0x0e] = 0x00; // header_type
pci_conf[0x3d] = 0x00; // no interrupt pin
/* Register I/O spaces */
pci_register_io_region((PCIDevice *)opp, 0, 0x40000,
PCI_ADDRESS_SPACE_MEM, &openpic_map);
} else {
opp = qemu_mallocz(sizeof(openpic_t));
}
opp->mem_index = cpu_register_io_memory(0, openpic_read,
openpic_write, opp);
// isu_base &= 0xFFFC0000;
opp->nb_cpus = nb_cpus;
/* Set IRQ types */
for (i = 0; i < EXT_IRQ; i++) {
......@@ -1013,6 +1017,7 @@ openpic_t *openpic_init (PCIBus *bus,
opp->src[i].type = IRQ_INTERNAL;
}
openpic_reset(opp);
if (pmem_index)
*pmem_index = opp->mem_index;
return opp;
}
......@@ -36,6 +36,7 @@ static int dbdma_mem_index;
static int cuda_mem_index;
static int ide0_mem_index;
static int ide1_mem_index;
static int openpic_mem_index;
/* DBDMA: currently no op - should suffice right now */
......@@ -87,6 +88,7 @@ static void macio_map(PCIDevice *pci_dev, int region_num,
cpu_register_physical_memory(addr + 0x16000, 0x2000, cuda_mem_index);
cpu_register_physical_memory(addr + 0x1f000, 0x1000, ide0_mem_index);
cpu_register_physical_memory(addr + 0x20000, 0x1000, ide1_mem_index);
cpu_register_physical_memory(addr + 0x40000, 0x40000, openpic_mem_index);
}
static void macio_init(PCIBus *bus)
......@@ -191,7 +193,7 @@ void ppc_chrp_init(int ram_size, int vga_ram_size, int boot_device,
/* init basic PC hardware */
vga_initialize(pci_bus, ds, phys_ram_base + ram_size, ram_size,
vga_ram_size);
openpic = openpic_init(pci_bus, 0x00000000, 0xF0000000, 1);
openpic = openpic_init(NULL, &openpic_mem_index, 1);
pci_pmac_set_openpic(pci_bus, openpic);
/* XXX: suppress that */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册