pc-bios/s390-ccw: add virtio-scsi implementation

Add virtio-scsi.[ch] with primary implementation of virtio-scsi.
Signed-off-by: NEugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

pc-bios/s390-ccw/virtio-scsi.c

+/*
+ * Virtio-SCSI implementation for s390 machine loader for qemu
+ *
+ * Copyright 2015 IBM Corp.
+ * Author: Eugene "jno" Dvurechenski <jno@linux.vnet.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or (at
+ * your option) any later version. See the COPYING file in the top-level
+ * directory.
+ */
+
+#include "s390-ccw.h"
+#include "virtio.h"
+#include "scsi.h"
+#include "virtio-scsi.h"
+
+static ScsiDevice default_scsi_device;
+static VirtioScsiCmdReq req;
+static VirtioScsiCmdResp resp;
+
+static uint8_t scsi_inquiry_std_response[256];
+
+static inline void vs_assert(bool term, const char **msgs)
+{
+    if (!term) {
+        int i = 0;
+
+        sclp_print("\n! ");
+        while (msgs[i]) {
+            sclp_print(msgs[i++]);
+        }
+        panic(" !\n");
+    }
+}
+
+static void virtio_scsi_verify_response(VirtioScsiCmdResp *resp,
+                                        const char *title)
+{
+    const char *mr[] = {
+        title, ": response ", virtio_scsi_response_msg(resp), 0
+    };
+    const char *ms[] = {
+        title,
+        CDB_STATUS_VALID(resp->status) ? ": " : ": invalid ",
+        scsi_cdb_status_msg(resp->status),
+        resp->status == CDB_STATUS_CHECK_CONDITION ? " " : 0,
+        resp->sense_len ? scsi_cdb_asc_msg(resp->sense)
+                        : "no sense data",
+        scsi_sense_response(resp->sense)  == 0x70 ? ", sure" : "?",
+        0
+    };
+
+    vs_assert(resp->response == VIRTIO_SCSI_S_OK, mr);
+    vs_assert(resp->status == CDB_STATUS_GOOD, ms);
+}
+
+static void prepare_request(VDev *vdev, const void *cdb, int cdb_size,
+                            void *data, uint32_t data_size)
+{
+    const ScsiDevice *sdev = vdev->scsi_device;
+
+    memset(&req, 0, sizeof(req));
+    req.lun = make_lun(sdev->channel, sdev->target, sdev->lun);
+    memcpy(&req.cdb, cdb, cdb_size);
+
+    memset(&resp, 0, sizeof(resp));
+    resp.status = 0xff;     /* set invalid  */
+    resp.response = 0xff;   /*              */
+
+    if (data && data_size) {
+        memset(data, 0, data_size);
+    }
+}
+
+static inline void vs_io_assert(bool term, const char *msg)
+{
+    if (!term) {
+        virtio_scsi_verify_response(&resp, msg);
+    }
+}
+
+static void vs_run(const char *title, VirtioCmd *cmd, VDev *vdev,
+                   const void *cdb, int cdb_size,
+                   void *data, uint32_t data_size)
+{
+    prepare_request(vdev, cdb, cdb_size, data, data_size);
+    vs_io_assert(virtio_run(vdev, VR_REQUEST, cmd) == 0, title);
+}
+
+/* SCSI protocol implementation routines */
+
+static bool scsi_inquiry(VDev *vdev, void *data, uint32_t data_size)
+{
+    ScsiCdbInquiry cdb = {
+        .command = 0x12,
+        .alloc_len = data_size < 65535 ? data_size : 65535,
+    };
+    VirtioCmd inquiry[] = {
+        { &req, sizeof(req), VRING_DESC_F_NEXT },
+        { &resp, sizeof(resp), VRING_DESC_F_WRITE | VRING_DESC_F_NEXT },
+        { data, data_size, VRING_DESC_F_WRITE },
+    };
+
+    vs_run("inquiry", inquiry, vdev, &cdb, sizeof(cdb), data, data_size);
+
+    return virtio_scsi_response_ok(&resp);
+}
+
+static bool scsi_test_unit_ready(VDev *vdev)
+{
+    ScsiCdbTestUnitReady cdb = {
+        .command = 0x00,
+    };
+    VirtioCmd test_unit_ready[] = {
+        { &req, sizeof(req), VRING_DESC_F_NEXT },
+        { &resp, sizeof(resp), VRING_DESC_F_WRITE },
+    };
+
+    prepare_request(vdev, &cdb, sizeof(cdb), 0, 0);
+    virtio_run(vdev, VR_REQUEST, test_unit_ready); /* ignore errors here */
+
+    return virtio_scsi_response_ok(&resp);
+}
+
+static bool scsi_report_luns(VDev *vdev, void *data, uint32_t data_size)
+{
+    ScsiCdbReportLuns cdb = {
+        .command = 0xa0,
+        .select_report = 0x02, /* REPORT ALL */
+        .alloc_len = data_size,
+    };
+    VirtioCmd report_luns[] = {
+        { &req, sizeof(req), VRING_DESC_F_NEXT },
+        { &resp, sizeof(resp), VRING_DESC_F_WRITE | VRING_DESC_F_NEXT },
+        { data, data_size, VRING_DESC_F_WRITE },
+    };
+
+    vs_run("report luns", report_luns,
+           vdev, &cdb, sizeof(cdb), data, data_size);
+
+    return virtio_scsi_response_ok(&resp);
+}
+
+static bool scsi_read_10(VDev *vdev,
+                         ulong sector, int sectors, void *data)
+{
+    int f = vdev->blk_factor;
+    unsigned int data_size = sectors * virtio_get_block_size() * f;
+    ScsiCdbRead10 cdb = {
+        .command = 0x28,
+        .lba = sector * f,
+        .xfer_length = sectors * f,
+    };
+    VirtioCmd read_10[] = {
+        { &req, sizeof(req), VRING_DESC_F_NEXT },
+        { &resp, sizeof(resp), VRING_DESC_F_WRITE | VRING_DESC_F_NEXT },
+        { data, data_size * f, VRING_DESC_F_WRITE },
+    };
+
+    debug_print_int("read_10  sector", sector);
+    debug_print_int("read_10 sectors", sectors);
+
+    vs_run("read(10)", read_10, vdev, &cdb, sizeof(cdb), data, data_size);
+
+    return virtio_scsi_response_ok(&resp);
+}
+
+static bool scsi_read_capacity(VDev *vdev,
+                               void *data, uint32_t data_size)
+{
+    ScsiCdbReadCapacity16 cdb = {
+        .command = 0x9e, /* SERVICE_ACTION_IN_16 */
+        .service_action = 0x10, /* SA_READ_CAPACITY */
+        .alloc_len = data_size,
+    };
+    VirtioCmd read_capacity_16[] = {
+        { &req, sizeof(req), VRING_DESC_F_NEXT },
+        { &resp, sizeof(resp), VRING_DESC_F_WRITE | VRING_DESC_F_NEXT },
+        { data, data_size, VRING_DESC_F_WRITE },
+    };
+
+    vs_run("read capacity", read_capacity_16,
+           vdev, &cdb, sizeof(cdb), data, data_size);
+
+    return virtio_scsi_response_ok(&resp);
+}
+
+/* virtio-scsi routines */
+
+static void virtio_scsi_locate_device(VDev *vdev)
+{
+    const uint16_t channel = 0; /* again, it's what QEMU does */
+    uint16_t target;
+    static uint8_t data[16 + 8 * 63];
+    ScsiLunReport *r = (void *) data;
+    ScsiDevice *sdev = vdev->scsi_device;
+    int i, luns;
+
+    /* QEMU has hardcoded channel #0 in many places.
+     * If this hardcoded value is ever changed, we'll need to add code for
+     * vdev->config.scsi.max_channel != 0 here.
+     */
+    debug_print_int("config.scsi.max_channel", vdev->config.scsi.max_channel);
+    debug_print_int("config.scsi.max_target ", vdev->config.scsi.max_target);
+    debug_print_int("config.scsi.max_lun    ", vdev->config.scsi.max_lun);
+
+    for (target = 0; target <= vdev->config.scsi.max_target; target++) {
+        sdev->channel = channel;
+        sdev->target = target; /* sdev->lun will be 0 here */
+        if (!scsi_report_luns(vdev, data, sizeof(data))) {
+            if (resp.response == VIRTIO_SCSI_S_BAD_TARGET) {
+                continue;
+            }
+            print_int("target", target);
+            virtio_scsi_verify_response(&resp, "SCSI cannot report LUNs");
+        }
+        if (r->lun_list_len == 0) {
+            print_int("no LUNs for target", target);
+            continue;
+        }
+        luns = r->lun_list_len / 8;
+        debug_print_int("LUNs reported", luns);
+        if (luns == 1) {
+            /* There is no ",lun=#" arg for -device or ",lun=0" given.
+             * Hence, the only LUN reported.
+             * Usually, it's 0.
+             */
+            sdev->lun = r->lun[0].v16[0]; /* it's returned this way */
+            debug_print_int("Have to use LUN", sdev->lun);
+            return; /* we have to use this device */
+        }
+        for (i = 0; i < luns; i++) {
+            if (r->lun[i].v64) {
+                /* Look for non-zero LUN - we have where to choose from */
+                sdev->lun = r->lun[i].v16[0];
+                debug_print_int("Will use LUN", sdev->lun);
+                return; /* we have found a device */
+            }
+        }
+    }
+    panic("\n! Cannot locate virtio-scsi device !\n");
+}
+
+int virtio_scsi_read_many(VDev *vdev,
+                          ulong sector, void *load_addr, int sec_num)
+{
+    if (!scsi_read_10(vdev, sector, sec_num, load_addr)) {
+        virtio_scsi_verify_response(&resp, "virtio-scsi:read_many");
+    }
+
+    return 0;
+}
+
+static bool virtio_scsi_inquiry_response_is_cdrom(void *data)
+{
+    const ScsiInquiryStd *response = data;
+    const int resp_data_fmt = response->b3 & 0x0f;
+    int i;
+
+    IPL_check(resp_data_fmt == 2, "Wrong INQUIRY response format");
+    if (resp_data_fmt != 2) {
+        return false; /* cannot decode */
+    }
+
+    if ((response->peripheral_qdt & 0x1f) == SCSI_INQ_RDT_CDROM) {
+        return true;
+    }
+
+    for (i = 0; i < sizeof(response->prod_id); i++) {
+        if (response->prod_id[i] != QEMU_CDROM_SIGNATURE[i]) {
+            return false;
+        }
+    }
+    return true;
+}
+
+static void scsi_parse_capacity_report(void *data,
+                                       uint64_t *last_lba, uint32_t *lb_len)
+{
+    ScsiReadCapacity16Data *p = data;
+
+    if (last_lba) {
+        *last_lba = p->ret_lba;
+    }
+
+    if (lb_len) {
+        *lb_len = p->lb_len;
+    }
+}
+
+void virtio_scsi_setup(VDev *vdev)
+{
+    int retry_test_unit_ready = 3;
+    uint8_t data[256];
+    uint32_t data_size = sizeof(data);
+
+    vdev->scsi_device = &default_scsi_device;
+    virtio_scsi_locate_device(vdev);
+
+    /* We have to "ping" the device before it becomes readable */
+    while (!scsi_test_unit_ready(vdev)) {
+
+        if (!virtio_scsi_response_ok(&resp)) {
+            uint8_t code = resp.sense[0] & SCSI_SENSE_CODE_MASK;
+            uint8_t sense_key = resp.sense[2] & SCSI_SENSE_KEY_MASK;
+
+            IPL_assert(resp.sense_len != 0, "virtio-scsi:setup: no SENSE data");
+
+            IPL_assert(retry_test_unit_ready && code == 0x70 &&
+                       sense_key == SCSI_SENSE_KEY_UNIT_ATTENTION,
+                       "virtio-scsi:setup: cannot retry");
+
+            /* retry on CHECK_CONDITION/UNIT_ATTENTION as it
+             * may not designate a real error, but it may be
+             * a result of device reset, etc.
+             */
+            retry_test_unit_ready--;
+            sleep(1);
+            continue;
+        }
+
+        virtio_scsi_verify_response(&resp, "virtio-scsi:setup");
+    }
+
+    /* read and cache SCSI INQUIRY response */
+    if (!scsi_inquiry(vdev, scsi_inquiry_std_response,
+                      sizeof(scsi_inquiry_std_response))) {
+        virtio_scsi_verify_response(&resp, "virtio-scsi:setup:inquiry");
+    }
+
+    if (virtio_scsi_inquiry_response_is_cdrom(scsi_inquiry_std_response)) {
+        sclp_print("SCSI CD-ROM detected.\n");
+        vdev->is_cdrom = true;
+        vdev->scsi_block_size = VIRTIO_ISO_BLOCK_SIZE;
+    }
+
+    if (!scsi_read_capacity(vdev, data, data_size)) {
+        virtio_scsi_verify_response(&resp, "virtio-scsi:setup:read_capacity");
+    }
+    scsi_parse_capacity_report(data, &vdev->scsi_last_block,
+                               (uint32_t *) &vdev->scsi_block_size);
+}

pc-bios/s390-ccw/virtio-scsi.h

+/*
+ * Virtio-SCSI definitions for s390 machine loader for qemu
+ *
+ * Copyright 2015 IBM Corp.
+ * Author: Eugene "jno" Dvurechenski <jno@linux.vnet.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or (at
+ * your option) any later version. See the COPYING file in the top-level
+ * directory.
+ */
+
+#ifndef VIRTIO_SCSI_H
+#define VIRTIO_SCSI_H
+
+#include "s390-ccw.h"
+#include "virtio.h"
+#include "scsi.h"
+
+#define VIRTIO_SCSI_CDB_SIZE   SCSI_DEFAULT_CDB_SIZE
+#define VIRTIO_SCSI_SENSE_SIZE SCSI_DEFAULT_SENSE_SIZE
+
+/* command-specific response values */
+#define VIRTIO_SCSI_S_OK                     0x00
+#define VIRTIO_SCSI_S_BAD_TARGET             0x03
+
+#define QEMU_CDROM_SIGNATURE "QEMU CD-ROM     "
+
+enum virtio_scsi_vq_id {
+    VR_CONTROL  = 0,
+    VR_EVENT    = 1,
+    VR_REQUEST  = 2,
+};
+
+struct VirtioScsiCmdReq {
+    ScsiLun lun;
+    uint64_t id;
+    uint8_t task_attr;   /* = 0 = VIRTIO_SCSI_S_SIMPLE */
+    uint8_t prio;
+    uint8_t crn;         /* = 0 */
+    uint8_t cdb[VIRTIO_SCSI_CDB_SIZE];
+} __attribute__((packed));
+typedef struct VirtioScsiCmdReq VirtioScsiCmdReq;
+
+struct VirtioScsiCmdResp {
+        uint32_t sense_len;
+        uint32_t residual;
+        uint16_t status_qualifier;
+        uint8_t status;      /* first check for .response    */
+        uint8_t response;    /* then for .status             */
+        uint8_t sense[VIRTIO_SCSI_SENSE_SIZE];
+} __attribute__((packed));
+typedef struct VirtioScsiCmdResp VirtioScsiCmdResp;
+
+static inline const char *virtio_scsi_response_msg(const VirtioScsiCmdResp *r)
+{
+    static char err_msg[] = "VS RESP=XX";
+    uint8_t v = r->response;
+
+    fill_hex_val(err_msg + 8, &v, 1);
+    return err_msg;
+}
+
+static inline bool virtio_scsi_response_ok(const VirtioScsiCmdResp *r)
+{
+        return r->response == VIRTIO_SCSI_S_OK && r->status == CDB_STATUS_GOOD;
+}
+
+void virtio_scsi_setup(VDev *vdev);
+int virtio_scsi_read_many(VDev *vdev,
+                          ulong sector, void *load_addr, int sec_num);
+
+#endif /* VIRTIO_SCSI_H */