The PINT/DAV pin is active low in the chip spec, not inverted on the board.

Make changes on known GPIO lines be verbose, initialise GPIO levels.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3511 c046a42c-6fe2-441c-8c8c-71466251a162

hw/palm.c

@@ -78,11 +78,10 @@ static CPUWriteMemoryFunc *static_writefn[] = {
 
 static void palmte_microwire_setup(struct omap_mpu_state_s *cpu)
 {
-    qemu_irq p_int = omap_gpio_in_get(cpu->gpio)[PALMTE_PINTDAV_GPIO];
-
     omap_uwire_attach(
                     cpu->microwire,
-                    tsc2102_init(qemu_irq_invert(p_int)),
+                    tsc2102_init(
+			    omap_gpio_in_get(cpu->gpio)[PALMTE_PINTDAV_GPIO]),
                     0);
 }
 
@@ -115,6 +114,62 @@ static void palmte_button_event(void *opaque, int keycode)
                         !(keycode & 0x80));
 }
 
+static void palmte_onoff_gpios(void *opaque, int line, int level)
+{
+    switch (line) {
+    case 0:
+        printf("%s: current to MMC/SD card %sabled.\n",
+                        __FUNCTION__, level ? "dis" : "en");
+        break;
+    case 1:
+        printf("%s: internal speaker amplifier %s.\n",
+                        __FUNCTION__, level ? "down" : "on");
+        break;
+
+    /* These LCD & Audio output signals have not been identified yet.  */
+    case 2:
+    case 3:
+    case 4:
+        printf("%s: LCD GPIO%i %s.\n",
+                        __FUNCTION__, line - 1, level ? "high" : "low");
+        break;
+    case 5:
+    case 6:
+        printf("%s: Audio GPIO%i %s.\n",
+                        __FUNCTION__, line - 4, level ? "high" : "low");
+        break;
+    }
+}
+
+static void palmte_gpio_setup(struct omap_mpu_state_s *cpu)
+{
+    qemu_irq *misc_gpio;
+
+    omap_mmc_handlers(cpu->mmc,
+                    omap_gpio_in_get(cpu->gpio)[PALMTE_MMC_WP_GPIO],
+                    qemu_irq_invert(omap_mpuio_in_get(cpu->mpuio)
+                            [PALMTE_MMC_SWITCH_GPIO]));
+
+    misc_gpio = qemu_allocate_irqs(palmte_onoff_gpios, cpu, 7);
+    omap_gpio_out_set(cpu->gpio, PALMTE_MMC_POWER_GPIO,	misc_gpio[0]);
+    omap_gpio_out_set(cpu->gpio, PALMTE_SPEAKER_GPIO,	misc_gpio[1]);
+    omap_gpio_out_set(cpu->gpio, 11,			misc_gpio[2]);
+    omap_gpio_out_set(cpu->gpio, 12,			misc_gpio[3]);
+    omap_gpio_out_set(cpu->gpio, 13,			misc_gpio[4]);
+    omap_mpuio_out_set(cpu->mpuio, 1,			misc_gpio[5]);
+    omap_mpuio_out_set(cpu->mpuio, 3,			misc_gpio[6]);
+
+    /* Reset some inputs to initial state.  */
+    qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[PALMTE_USBDETECT_GPIO]);
+    qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[PALMTE_USB_OR_DC_GPIO]);
+    qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[4]);
+    qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[PALMTE_HEADPHONES_GPIO]);
+    qemu_irq_lower(omap_mpuio_in_get(cpu->mpuio)[PALMTE_DC_GPIO]);
+    qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[6]);
+    qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[7]);
+    qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[11]);
+}
+
 static void palmte_init(int ram_size, int vga_ram_size,
                 const char *boot_device, DisplayState *ds,
                 const char **fd_filename, int snapshot,
@@ -158,10 +213,7 @@ static void palmte_init(int ram_size, int vga_ram_size,
 
     qemu_add_kbd_event_handler(palmte_button_event, cpu);
 
-    omap_mmc_handlers(cpu->mmc,
-                    omap_gpio_in_get(cpu->gpio)[PALMTE_MMC_WP_GPIO],
-                    qemu_irq_invert(omap_mpuio_in_get(cpu->mpuio)
-                            [PALMTE_MMC_SWITCH_GPIO]));
+    palmte_gpio_setup(cpu);
 
     /* Setup initial (reset) machine state */
     if (nb_option_roms) {

hw/tsc210x.c

 /*
- * TI TSC2102 (touchscreen/sensors/audio controller) controller.
+ * TI TSC2102 (touchscreen/sensors/audio controller) emulator.
  *
  * Copyright (c) 2006 Andrzej Zaborowski  <balrog@zabor.org>
  *
@@ -171,7 +171,7 @@ static void tsc210x_reset(struct tsc210x_state_s *s)
     s->filter_data[0x12] = 0x7d83;
     s->filter_data[0x13] = 0x84ee;
 
-    qemu_set_irq(s->pint, s->irq);
+    qemu_set_irq(s->pint, !s->irq);
 }
 
 static uint16_t tsc2102_data_register_read(struct tsc210x_state_s *s, int reg)
@@ -572,7 +572,7 @@ static void tsc210x_pin_update(struct tsc210x_state_s *s)
 
     if (pin_state != s->irq) {
         s->irq = pin_state;
-        qemu_set_irq(s->pint, s->irq);
+        qemu_set_irq(s->pint, !s->irq);
     }
 
     switch (s->nextfunction) {
@@ -810,7 +810,7 @@ static int tsc210x_load(QEMUFile *f, void *opaque, int version_id)
         qemu_get_be16s(f, &s->filter_data[i]);
 
     s->busy = qemu_timer_pending(s->timer);
-    qemu_set_irq(s->pint, s->irq);
+    qemu_set_irq(s->pint, !s->irq);
 
     return 0;
 }