target-ppc: PowerPC 440EP SoC emulation

Wire up the system-on-chip devices present on 440EP chips.

This patch is a little unusual in that qemu doesn't actually emulate the 440
core, but we use this board code with KVM (which does). If/when 440 core
emulation is supported, the kvm_enabled() hack can be removed.
Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6066 c046a42c-6fe2-441c-8c8c-71466251a162

Makefile.target

@@ -655,6 +655,7 @@ OBJS+= heathrow_pic.o grackle_pci.o ppc_oldworld.o
 OBJS+= unin_pci.o ppc_chrp.o
 # PowerPC 4xx boards
 OBJS+= pflash_cfi02.o ppc4xx_devs.o ppc4xx_pci.o ppc405_uc.o ppc405_boards.o
+OBJS+= ppc440.o
 ifdef FDT_LIBS
 OBJS+= device_tree.o
 LIBS+= $(FDT_LIBS)

hw/ppc440.c

+/*
+ * Qemu PowerPC 440 chip emulation
+ *
+ * Copyright 2007 IBM Corporation.
+ * Authors:
+ * 	Jerone Young <jyoung5@us.ibm.com>
+ * 	Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
+ * 	Hollis Blanchard <hollisb@us.ibm.com>
+ *
+ * This work is licensed under the GNU GPL license version 2 or later.
+ *
+ */
+
+#include "hw.h"
+#include "isa.h"
+#include "ppc.h"
+#include "ppc4xx.h"
+#include "ppc440.h"
+#include "ppc405.h"
+#include "sysemu.h"
+#include "kvm.h"
+
+#define PPC440EP_PCI_CONFIG     0xeec00000
+#define PPC440EP_PCI_INTACK     0xeed00000
+#define PPC440EP_PCI_SPECIAL    0xeed00000
+#define PPC440EP_PCI_REGS       0xef400000
+#define PPC440EP_PCI_IO         0xe8000000
+#define PPC440EP_PCI_IOLEN      0x00010000
+
+#define PPC440EP_SDRAM_NR_BANKS 4
+
+static const unsigned int ppc440ep_sdram_bank_sizes[] = {
+    256<<20, 128<<20, 64<<20, 32<<20, 16<<20, 8<<20, 0
+};
+
+CPUState *ppc440ep_init(ram_addr_t *ram_size, PCIBus **pcip,
+                        const unsigned int pci_irq_nrs[4], int do_init)
+{
+    target_phys_addr_t ram_bases[PPC440EP_SDRAM_NR_BANKS];
+    target_phys_addr_t ram_sizes[PPC440EP_SDRAM_NR_BANKS];
+    CPUState *env;
+    ppc4xx_mmio_t *mmio;
+    qemu_irq *pic;
+    qemu_irq *irqs;
+    qemu_irq *pci_irqs;
+
+    env = cpu_ppc_init("440EP");
+    if (!env && kvm_enabled()) {
+        /* XXX Since qemu doesn't yet emulate 440, we just say it's a 405.
+         * Since KVM doesn't use qemu's CPU emulation it seems to be working
+         * OK. */
+        env = cpu_ppc_init("405");
+    }
+    if (!env) {
+        fprintf(stderr, "Unable to initialize CPU!\n");
+        exit(1);
+    }
+
+    ppc_dcr_init(env, NULL, NULL);
+
+    /* interrupt controller */
+    irqs = qemu_mallocz(sizeof(qemu_irq) * PPCUIC_OUTPUT_NB);
+    irqs[PPCUIC_OUTPUT_INT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_INT];
+    irqs[PPCUIC_OUTPUT_CINT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_CINT];
+    pic = ppcuic_init(env, irqs, 0x0C0, 0, 1);
+
+    /* SDRAM controller */
+    memset(ram_bases, 0, sizeof(ram_bases));
+    memset(ram_sizes, 0, sizeof(ram_sizes));
+    *ram_size = ppc4xx_sdram_adjust(*ram_size, PPC440EP_SDRAM_NR_BANKS,
+                                    ram_bases, ram_sizes,
+                                    ppc440ep_sdram_bank_sizes);
+    /* XXX 440EP's ECC interrupts are on UIC1, but we've only created UIC0. */
+    ppc4xx_sdram_init(env, pic[14], PPC440EP_SDRAM_NR_BANKS, ram_bases,
+                      ram_sizes, do_init);
+
+    /* PCI */
+    pci_irqs = qemu_malloc(sizeof(qemu_irq) * 4);
+    pci_irqs[0] = pic[pci_irq_nrs[0]];
+    pci_irqs[1] = pic[pci_irq_nrs[1]];
+    pci_irqs[2] = pic[pci_irq_nrs[2]];
+    pci_irqs[3] = pic[pci_irq_nrs[3]];
+    *pcip = ppc4xx_pci_init(env, pci_irqs,
+                            PPC440EP_PCI_CONFIG,
+                            PPC440EP_PCI_INTACK,
+                            PPC440EP_PCI_SPECIAL,
+                            PPC440EP_PCI_REGS);
+    if (!*pcip)
+        printf("couldn't create PCI controller!\n");
+
+    isa_mmio_init(PPC440EP_PCI_IO, PPC440EP_PCI_IOLEN);
+
+    /* MMIO -- most "miscellaneous" devices live above 0xef600000. */
+    mmio = ppc4xx_mmio_init(env, 0xef600000);
+
+    if (serial_hds[0])
+        ppc405_serial_init(env, mmio, 0x300, pic[0], serial_hds[0]);
+
+    if (serial_hds[1])
+        ppc405_serial_init(env, mmio, 0x400, pic[1], serial_hds[1]);
+
+    return env;
+}

hw/ppc440.h

+/*
+ * Qemu PowerPC 440 board emualtion
+ *
+ * Copyright 2007 IBM Corporation.
+ * Authors: Jerone Young <jyoung5@us.ibm.com>
+ * 	    Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
+ *
+ * This work is licensed under the GNU GPL licence version 2 or later
+ *
+ */
+
+#ifndef QEMU_PPC440_H
+#define QEMU_PPC440_H
+
+#include "hw.h"
+
+CPUState *ppc440ep_init(ram_addr_t *ram_size, PCIBus **pcip,
+                        const unsigned int pci_irq_nrs[4], int do_init);
+
+#endif