target-arm: Minimal implementation of performance counters

Newer Linux kernels assume the existence of the performance counter
cp15 registers. Provide a minimal implementation of these registers.
We support no events. This should be compliant with the ARM ARM,
except that we don't implement the cycle counter.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-arm/cpu.h

@@ -133,6 +133,12 @@ typedef struct CPUARMState {
         uint32_t c7_par;  /* Translation result. */
         uint32_t c9_insn; /* Cache lockdown registers.  */
         uint32_t c9_data;
+        uint32_t c9_pmcr; /* performance monitor control register */
+        uint32_t c9_pmcnten; /* perf monitor counter enables */
+        uint32_t c9_pmovsr; /* perf monitor overflow status */
+        uint32_t c9_pmxevtyper; /* perf monitor event type */
+        uint32_t c9_pmuserenr; /* perf monitor user enable */
+        uint32_t c9_pminten; /* perf monitor interrupt enables */
         uint32_t c13_fcse; /* FCSE PID.  */
         uint32_t c13_context; /* Context ID.  */
         uint32_t c13_tls1; /* User RW Thread register.  */
@@ -438,7 +444,7 @@ void cpu_arm_set_cp_io(CPUARMState *env, int cpnum,
 #define cpu_signal_handler cpu_arm_signal_handler
 #define cpu_list arm_cpu_list
 
-#define CPU_SAVE_VERSION 3
+#define CPU_SAVE_VERSION 4
 
 /* MMU modes definitions */
 #define MMU_MODE0_SUFFIX _kernel

target-arm/helper.c

@@ -270,6 +270,10 @@ void cpu_reset(CPUARMState *env)
     }
     env->vfp.xregs[ARM_VFP_FPEXC] = 0;
     env->cp15.c2_base_mask = 0xffffc000u;
+    /* v7 performance monitor control register: same implementor
+     * field as main ID register, and we implement no event counters.
+     */
+    env->cp15.c9_pmcr = (id & 0xff000000);
 #endif
     set_flush_to_zero(1, &env->vfp.standard_fp_status);
     set_flush_inputs_to_zero(1, &env->vfp.standard_fp_status);
@@ -1588,6 +1592,81 @@ void HELPER(set_cp15)(CPUState *env, uint32_t insn, uint32_t val)
         case 1: /* TCM memory region registers.  */
             /* Not implemented.  */
             goto bad_reg;
+        case 12: /* Performance monitor control */
+            /* Performance monitors are implementation defined in v7,
+             * but with an ARM recommended set of registers, which we
+             * follow (although we don't actually implement any counters)
+             */
+            if (!arm_feature(env, ARM_FEATURE_V7)) {
+                goto bad_reg;
+            }
+            switch (op2) {
+            case 0: /* performance monitor control register */
+                /* only the DP, X, D and E bits are writable */
+                env->cp15.c9_pmcr &= ~0x39;
+                env->cp15.c9_pmcr |= (val & 0x39);
+                break;
+            case 1: /* Count enable set register */
+                val &= (1 << 31);
+                env->cp15.c9_pmcnten |= val;
+                break;
+            case 2: /* Count enable clear */
+                val &= (1 << 31);
+                env->cp15.c9_pmcnten &= ~val;
+                break;
+            case 3: /* Overflow flag status */
+                env->cp15.c9_pmovsr &= ~val;
+                break;
+            case 4: /* Software increment */
+                /* RAZ/WI since we don't implement the software-count event */
+                break;
+            case 5: /* Event counter selection register */
+                /* Since we don't implement any events, writing to this register
+                 * is actually UNPREDICTABLE. So we choose to RAZ/WI.
+                 */
+                break;
+            default:
+                goto bad_reg;
+            }
+            break;
+        case 13: /* Performance counters */
+            if (!arm_feature(env, ARM_FEATURE_V7)) {
+                goto bad_reg;
+            }
+            switch (op2) {
+            case 0: /* Cycle count register: not implemented, so RAZ/WI */
+                break;
+            case 1: /* Event type select */
+                env->cp15.c9_pmxevtyper = val & 0xff;
+                break;
+            case 2: /* Event count register */
+                /* Unimplemented (we have no events), RAZ/WI */
+                break;
+            default:
+                goto bad_reg;
+            }
+            break;
+        case 14: /* Performance monitor control */
+            if (!arm_feature(env, ARM_FEATURE_V7)) {
+                goto bad_reg;
+            }
+            switch (op2) {
+            case 0: /* user enable */
+                env->cp15.c9_pmuserenr = val & 1;
+                /* changes access rights for cp registers, so flush tbs */
+                tb_flush(env);
+                break;
+            case 1: /* interrupt enable set */
+                /* We have no event counters so only the C bit can be changed */
+                val &= (1 << 31);
+                env->cp15.c9_pminten |= val;
+                break;
+            case 2: /* interrupt enable clear */
+                val &= (1 << 31);
+                env->cp15.c9_pminten &= ~val;
+                break;
+            }
+            break;
         default:
             goto bad_reg;
         }
@@ -1879,27 +1958,81 @@ uint32_t HELPER(get_cp15)(CPUState *env, uint32_t insn)
         return 0;
     case 8: /* MMU TLB control.  */
         goto bad_reg;
-    case 9: /* Cache lockdown.  */
-        switch (op1) {
-        case 0: /* L1 cache.  */
-	    if (arm_feature(env, ARM_FEATURE_OMAPCP))
-		return 0;
+    case 9:
+        switch (crm) {
+        case 0: /* Cache lockdown */
+            switch (op1) {
+            case 0: /* L1 cache.  */
+                if (arm_feature(env, ARM_FEATURE_OMAPCP)) {
+                    return 0;
+                }
+                switch (op2) {
+                case 0:
+                    return env->cp15.c9_data;
+                case 1:
+                    return env->cp15.c9_insn;
+                default:
+                    goto bad_reg;
+                }
+            case 1: /* L2 cache */
+                if (crm != 0) {
+                    goto bad_reg;
+                }
+                /* L2 Lockdown and Auxiliary control.  */
+                return 0;
+            default:
+                goto bad_reg;
+            }
+            break;
+        case 12: /* Performance monitor control */
+            if (!arm_feature(env, ARM_FEATURE_V7)) {
+                goto bad_reg;
+            }
             switch (op2) {
-            case 0:
-                return env->cp15.c9_data;
-            case 1:
-                return env->cp15.c9_insn;
+            case 0: /* performance monitor control register */
+                return env->cp15.c9_pmcr;
+            case 1: /* count enable set */
+            case 2: /* count enable clear */
+                return env->cp15.c9_pmcnten;
+            case 3: /* overflow flag status */
+                return env->cp15.c9_pmovsr;
+            case 4: /* software increment */
+            case 5: /* event counter selection register */
+                return 0; /* Unimplemented, RAZ/WI */
             default:
                 goto bad_reg;
             }
-        case 1: /* L2 cache */
-            if (crm != 0)
+        case 13: /* Performance counters */
+            if (!arm_feature(env, ARM_FEATURE_V7)) {
+                goto bad_reg;
+            }
+            switch (op2) {
+            case 1: /* Event type select */
+                return env->cp15.c9_pmxevtyper;
+            case 0: /* Cycle count register */
+            case 2: /* Event count register */
+                /* Unimplemented, so RAZ/WI */
+                return 0;
+            default:
                 goto bad_reg;
-            /* L2 Lockdown and Auxiliary control.  */
-            return 0;
+            }
+        case 14: /* Performance monitor control */
+            if (!arm_feature(env, ARM_FEATURE_V7)) {
+                goto bad_reg;
+            }
+            switch (op2) {
+            case 0: /* user enable */
+                return env->cp15.c9_pmuserenr;
+            case 1: /* interrupt enable set */
+            case 2: /* interrupt enable clear */
+                return env->cp15.c9_pminten;
+            default:
+                goto bad_reg;
+            }
         default:
             goto bad_reg;
         }
+        break;
     case 10: /* MMU TLB lockdown.  */
         /* ??? TLB lockdown not implemented.  */
         return 0;

target-arm/machine.c

@@ -44,6 +44,12 @@ void cpu_save(QEMUFile *f, void *opaque)
     qemu_put_be32(f, env->cp15.c7_par);
     qemu_put_be32(f, env->cp15.c9_insn);
     qemu_put_be32(f, env->cp15.c9_data);
+    qemu_put_be32(f, env->cp15.c9_pmcr);
+    qemu_put_be32(f, env->cp15.c9_pmcnten);
+    qemu_put_be32(f, env->cp15.c9_pmovsr);
+    qemu_put_be32(f, env->cp15.c9_pmxevtyper);
+    qemu_put_be32(f, env->cp15.c9_pmuserenr);
+    qemu_put_be32(f, env->cp15.c9_pminten);
     qemu_put_be32(f, env->cp15.c13_fcse);
     qemu_put_be32(f, env->cp15.c13_context);
     qemu_put_be32(f, env->cp15.c13_tls1);
@@ -152,6 +158,12 @@ int cpu_load(QEMUFile *f, void *opaque, int version_id)
     env->cp15.c7_par = qemu_get_be32(f);
     env->cp15.c9_insn = qemu_get_be32(f);
     env->cp15.c9_data = qemu_get_be32(f);
+    env->cp15.c9_pmcr = qemu_get_be32(f);
+    env->cp15.c9_pmcnten = qemu_get_be32(f);
+    env->cp15.c9_pmovsr = qemu_get_be32(f);
+    env->cp15.c9_pmxevtyper = qemu_get_be32(f);
+    env->cp15.c9_pmuserenr = qemu_get_be32(f);
+    env->cp15.c9_pminten = qemu_get_be32(f);
     env->cp15.c13_fcse = qemu_get_be32(f);
     env->cp15.c13_context = qemu_get_be32(f);
     env->cp15.c13_tls1 = qemu_get_be32(f);

target-arm/translate.c

@@ -2472,12 +2472,28 @@ static int disas_cp_insn(CPUState *env, DisasContext *s, uint32_t insn)
     return 0;
 }
 
-static int cp15_user_ok(uint32_t insn)
+static int cp15_user_ok(CPUState *env, uint32_t insn)
 {
     int cpn = (insn >> 16) & 0xf;
     int cpm = insn & 0xf;
     int op = ((insn >> 5) & 7) | ((insn >> 18) & 0x38);
 
+    if (arm_feature(env, ARM_FEATURE_V7) && cpn == 9) {
+        /* Performance monitor registers fall into three categories:
+         *  (a) always UNDEF in usermode
+         *  (b) UNDEF only if PMUSERENR.EN is 0
+         *  (c) always read OK and UNDEF on write (PMUSERENR only)
+         */
+        if ((cpm == 12 && (op < 6)) ||
+            (cpm == 13 && (op < 3))) {
+            return env->cp15.c9_pmuserenr;
+        } else if (cpm == 14 && op == 0 && (insn & ARM_CP_RW_BIT)) {
+            /* PMUSERENR, read only */
+            return 1;
+        }
+        return 0;
+    }
+
     if (cpn == 13 && cpm == 0) {
         /* TLS register.  */
         if (op == 2 || (op == 3 && (insn & ARM_CP_RW_BIT)))
@@ -2564,7 +2580,7 @@ static int disas_cp15_insn(CPUState *env, DisasContext *s, uint32_t insn)
         /* cdp */
         return 1;
     }
-    if (IS_USER(s) && !cp15_user_ok(insn)) {
+    if (IS_USER(s) && !cp15_user_ok(env, insn)) {
         return 1;
     }