You need to sign in or sign up before continuing.
提交 703243a0 编写于 作者: B balrog

Adds interrupt support to the sh specific timer code (Magnus Damm).


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3812 c046a42c-6fe2-441c-8c8c-71466251a162
上级 b7d35e65
......@@ -2,6 +2,8 @@
#define QEMU_SH_H
/* Definitions for SH board emulation. */
#include "sh_intc.h"
/* sh7750.c */
struct SH7750State;
......@@ -25,7 +27,10 @@ int sh7750_register_io_device(struct SH7750State *s,
#define TMU012_FEAT_TOCR (1 << 0)
#define TMU012_FEAT_3CHAN (1 << 1)
#define TMU012_FEAT_EXTCLK (1 << 2)
void tmu012_init(uint32_t base, int feat, uint32_t freq);
void tmu012_init(target_phys_addr_t base, int feat, uint32_t freq,
struct intc_source *ch0_irq, struct intc_source *ch1_irq,
struct intc_source *ch2_irq0, struct intc_source *ch2_irq1);
/* sh_serial.c */
#define SH_SERIAL_FEAT_SCIF (1 << 0)
......
......@@ -559,8 +559,11 @@ SH7750State *sh7750_init(CPUSH4State * cpu)
tmu012_init(0x1fd80000,
TMU012_FEAT_TOCR | TMU012_FEAT_3CHAN | TMU012_FEAT_EXTCLK,
s->periph_freq);
s->periph_freq,
sh_intc_source(&s->intc, TMU0),
sh_intc_source(&s->intc, TMU1),
sh_intc_source(&s->intc, TMU2_TUNI),
sh_intc_source(&s->intc, TMU2_TICPI));
if (cpu_model & (SH_CPU_SH7750 | SH_CPU_SH7750S | SH_CPU_SH7751)) {
sh_intc_register_sources(&s->intc,
......@@ -578,7 +581,10 @@ SH7750State *sh7750_init(CPUSH4State * cpu)
sh_intc_register_sources(&s->intc,
_INTC_ARRAY(vectors_tmu34),
NULL, 0);
tmu012_init(0x1e100000, 0, s->periph_freq);
tmu012_init(0x1e100000, 0, s->periph_freq,
sh_intc_source(&s->intc, TMU3),
sh_intc_source(&s->intc, TMU4),
NULL, NULL);
}
if (cpu_model & (SH_CPU_SH7751_ALL)) {
......
......@@ -33,23 +33,23 @@ typedef struct {
uint32_t tcpr;
int freq;
int int_level;
int old_level;
int feat;
int enabled;
qemu_irq irq;
struct intc_source *irq;
} sh_timer_state;
/* Check all active timers, and schedule the next timer interrupt. */
static void sh_timer_update(sh_timer_state *s)
{
#if 0 /* not yet */
/* Update interrupts. */
if (s->int_level && (s->tcr & TIMER_TCR_UNIE)) {
qemu_irq_raise(s->irq);
} else {
qemu_irq_lower(s->irq);
}
#endif
int new_level = s->int_level && (s->tcr & TIMER_TCR_UNIE);
if (new_level != s->old_level)
sh_intc_toggle_source(s->irq, 0, new_level ? 1 : -1);
s->old_level = s->int_level;
s->int_level = new_level;
}
static uint32_t sh_timer_read(void *opaque, target_phys_addr_t offset)
......@@ -185,7 +185,7 @@ static void sh_timer_tick(void *opaque)
sh_timer_update(s);
}
static void *sh_timer_init(uint32_t freq, int feat)
static void *sh_timer_init(uint32_t freq, int feat, struct intc_source *irq)
{
sh_timer_state *s;
QEMUBH *bh;
......@@ -198,6 +198,7 @@ static void *sh_timer_init(uint32_t freq, int feat)
s->tcpr = 0xdeadbeef;
s->tcor = 0;
s->enabled = 0;
s->irq = irq;
bh = qemu_bh_new(sh_timer_tick, s);
s->timer = ptimer_init(bh);
......@@ -305,7 +306,9 @@ static CPUWriteMemoryFunc *tmu012_writefn[] = {
tmu012_write
};
void tmu012_init(uint32_t base, int feat, uint32_t freq)
void tmu012_init(target_phys_addr_t base, int feat, uint32_t freq,
struct intc_source *ch0_irq, struct intc_source *ch1_irq,
struct intc_source *ch2_irq0, struct intc_source *ch2_irq1)
{
int iomemtype;
tmu012_state *s;
......@@ -314,10 +317,11 @@ void tmu012_init(uint32_t base, int feat, uint32_t freq)
s = (tmu012_state *)qemu_mallocz(sizeof(tmu012_state));
s->base = base;
s->feat = feat;
s->timer[0] = sh_timer_init(freq, timer_feat);
s->timer[1] = sh_timer_init(freq, timer_feat);
s->timer[0] = sh_timer_init(freq, timer_feat, ch0_irq);
s->timer[1] = sh_timer_init(freq, timer_feat, ch1_irq);
if (feat & TMU012_FEAT_3CHAN)
s->timer[2] = sh_timer_init(freq, timer_feat | TIMER_FEAT_CAPT);
s->timer[2] = sh_timer_init(freq, timer_feat | TIMER_FEAT_CAPT,
ch2_irq0); /* ch2_irq1 not supported */
iomemtype = cpu_register_io_memory(0, tmu012_readfn,
tmu012_writefn, s);
cpu_register_physical_memory(base, 0x00001000, iomemtype);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册