pci: set PCI multi-function bit appropriately.

Set PCI multi-function bit according to multifunction property.
PCI address, devfn ,is exported to users as addr property,
so users can populate pci function(PCIDevice in qemu)
at arbitrary devfn.
It means each function(PCIDevice) don't know whether pci device
(PCIDevice[8]) is multi function or not.
So this patch allows user to set multifunction bit via property
and checks whether multifunction bit is set correctly.

Cc:  Juan Quintela <quintela@redhat.com>
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

hw/apb_pci.c

@@ -312,9 +312,6 @@ static void apb_pci_bridge_init(PCIBus *b)
                  PCI_STATUS_FAST_BACK | PCI_STATUS_66MHZ |
                  PCI_STATUS_DEVSEL_MEDIUM);
     pci_set_byte(dev->config + PCI_REVISION_ID, 0x11);
-    pci_set_byte(dev->config + PCI_HEADER_TYPE,
-                 pci_get_byte(dev->config + PCI_HEADER_TYPE) |
-                 PCI_HEADER_TYPE_MULTI_FUNCTION);
 }
 
 PCIBus *pci_apb_init(target_phys_addr_t special_base,

hw/pci.c

@@ -584,6 +584,54 @@ static void pci_init_wmask_bridge(PCIDevice *d)
     pci_set_word(d->wmask + PCI_BRIDGE_CONTROL, 0xffff);
 }
 
+static int pci_init_multifunction(PCIBus *bus, PCIDevice *dev)
+{
+    uint8_t slot = PCI_SLOT(dev->devfn);
+    uint8_t func;
+
+    if (dev->cap_present & QEMU_PCI_CAP_MULTIFUNCTION) {
+        dev->config[PCI_HEADER_TYPE] |= PCI_HEADER_TYPE_MULTI_FUNCTION;
+    }
+
+    /*
+     * multifuction bit is interpreted in two ways as follows.
+     *   - all functions must set the bit to 1.
+     *     Example: Intel X53
+     *   - function 0 must set the bit, but the rest function (> 0)
+     *     is allowed to leave the bit to 0.
+     *     Example: PIIX3(also in qemu), PIIX4(also in qemu), ICH10,
+     *
+     * So OS (at least Linux) checks the bit of only function 0,
+     * and doesn't see the bit of function > 0.
+     *
+     * The below check allows both interpretation.
+     */
+    if (PCI_FUNC(dev->devfn)) {
+        PCIDevice *f0 = bus->devices[PCI_DEVFN(slot, 0)];
+        if (f0 && !(f0->cap_present & QEMU_PCI_CAP_MULTIFUNCTION)) {
+            /* function 0 should set multifunction bit */
+            error_report("PCI: single function device can't be populated "
+                         "in function %x.%x", slot, PCI_FUNC(dev->devfn));
+            return -1;
+        }
+        return 0;
+    }
+
+    if (dev->cap_present & QEMU_PCI_CAP_MULTIFUNCTION) {
+        return 0;
+    }
+    /* function 0 indicates single function, so function > 0 must be NULL */
+    for (func = 1; func < PCI_FUNC_MAX; ++func) {
+        if (bus->devices[PCI_DEVFN(slot, func)]) {
+            error_report("PCI: %x.0 indicates single function, "
+                         "but %x.%x is already populated.",
+                         slot, slot, func);
+            return -1;
+        }
+    }
+    return 0;
+}
+
 static void pci_config_alloc(PCIDevice *pci_dev)
 {
     int config_size = pci_config_size(pci_dev);
@@ -637,6 +685,10 @@ static PCIDevice *do_pci_register_device(PCIDevice *pci_dev, PCIBus *bus,
     if (is_bridge) {
         pci_init_wmask_bridge(pci_dev);
     }
+    if (pci_init_multifunction(bus, pci_dev)) {
+        pci_config_free(pci_dev);
+        return NULL;
+    }
 
     if (!config_read)
         config_read = pci_default_read_config;

hw/piix4.c

@@ -93,8 +93,6 @@ static int piix4_initfn(PCIDevice *d)
     pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL);
     pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82371AB_0); // 82371AB/EB/MB PIIX4 PCI-to-ISA bridge
     pci_config_set_class(pci_conf, PCI_CLASS_BRIDGE_ISA);
-    pci_conf[PCI_HEADER_TYPE] =
-        PCI_HEADER_TYPE_NORMAL | PCI_HEADER_TYPE_MULTI_FUNCTION; // header_type = PCI_multifunction, generic
 
     piix4_dev = d;
     qemu_register_reset(piix4_reset, d);

hw/piix_pci.c

@@ -335,8 +335,6 @@ static int piix3_initfn(PCIDevice *dev)
     pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL);
     pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82371SB_0); // 82371SB PIIX3 PCI-to-ISA bridge (Step A1)
     pci_config_set_class(pci_conf, PCI_CLASS_BRIDGE_ISA);
-    pci_conf[PCI_HEADER_TYPE] =
-        PCI_HEADER_TYPE_NORMAL | PCI_HEADER_TYPE_MULTI_FUNCTION; // header_type = PCI_multifunction, generic
 
     qemu_register_reset(piix3_reset, d);
     return 0;