Skip to content

Q
qemu

openeuler / qemu

通知 10
Star 0
Fork 0
Q
qemu

体验新版 GitCode，发现更多精彩内容 >>

提交 64eb7491 编写于 作者: H Hervé Poussineau 提交者： Paolo Bonzini
浏览文件
操作

lsi: print register names in debug prints 

Modify lsi_reg_readb function to have a single exit point. Debug print can now
contain the returned value.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Message-Id: <1471505489-1221-2-git-send-email-hpoussin@reactos.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
上级 dc0a3e44
隐藏空白更改
内联 并排
Showing with 146 addition and 73 deletion
hw/scsi/lsi53c895a.c
浏览文件 @ 64eb7491
......@@ -34,6 +34,23 @@ do { fprintf(stderr, "lsi_scsi: error: " fmt , ## __VA_ARGS__); exit(1);} while
do { fprintf(stderr, "lsi_scsi: error: " fmt , ## __VA_ARGS__);} while (0)
#endif
#ifdef DEBUG_LSI_REG
static const char *names[] = {
"SCNTL0", "SCNTL1", "SCNTL2", "SCNTL3", "SCID", "SXFER", "SDID", "GPREG",
"SFBR", "SOCL", "SSID", "SBCL", "DSTAT", "SSTAT0", "SSTAT1", "SSTAT2",
"DSA0", "DSA1", "DSA2", "DSA3", "ISTAT", "0x15", "0x16", "0x17",
"CTEST0", "CTEST1", "CTEST2", "CTEST3", "TEMP0", "TEMP1", "TEMP2", "TEMP3",
"DFIFO", "CTEST4", "CTEST5", "CTEST6", "DBC0", "DBC1", "DBC2", "DCMD",
"DNAD0", "DNAD1", "DNAD2", "DNAD3", "DSP0", "DSP1", "DSP2", "DSP3",
"DSPS0", "DSPS1", "DSPS2", "DSPS3", "SCRATCHA0", "SCRATCHA1", "SCRATCHA2", "SCRATCHA3",
"DMODE", "DIEN", "SBR", "DCNTL", "ADDER0", "ADDER1", "ADDER2", "ADDER3",
"SIEN0", "SIEN1", "SIST0", "SIST1", "SLPAR", "0x45", "MACNTL", "GPCNTL",
"STIME0", "STIME1", "RESPID", "0x4b", "STEST0", "STEST1", "STEST2", "STEST3",
"SIDL", "0x51", "0x52", "0x53", "SODL", "0x55", "0x56", "0x57",
"SBDL", "0x59", "0x5a", "0x5b", "SCRATCHB0", "SCRATCHB1", "SCRATCHB2", "SCRATCHB3",
};
#endif
#define LSI_MAX_DEVS 7
#define LSI_SCNTL0_TRG 0x01
......@@ -1480,155 +1497,200 @@ again:
static uint8_t lsi_reg_readb(LSIState *s, int offset)
{
uint8_t tmp;
uint8_t ret;
#define CASE_GET_REG24(name, addr) \
case addr: return s->name & 0xff; \
case addr + 1: return (s->name >> 8) & 0xff; \
case addr + 2: return (s->name >> 16) & 0xff;
case addr: ret = s->name & 0xff; break; \
case addr + 1: ret = (s->name >> 8) & 0xff; break; \
case addr + 2: ret = (s->name >> 16) & 0xff; break;
#define CASE_GET_REG32(name, addr) \
case addr: return s->name & 0xff; \
case addr + 1: return (s->name >> 8) & 0xff; \
case addr + 2: return (s->name >> 16) & 0xff; \
case addr + 3: return (s->name >> 24) & 0xff;
case addr: ret = s->name & 0xff; break; \
case addr + 1: ret = (s->name >> 8) & 0xff; break; \
case addr + 2: ret = (s->name >> 16) & 0xff; break; \
case addr + 3: ret = (s->name >> 24) & 0xff; break;
#ifdef DEBUG_LSI_REG
DPRINTF("Read reg %x\n", offset);
#endif
switch (offset) {
case 0x00: /* SCNTL0 */
return s->scntl0;
ret = s->scntl0;
break;
case 0x01: /* SCNTL1 */
return s->scntl1;
ret = s->scntl1;
break;
case 0x02: /* SCNTL2 */
return s->scntl2;
ret = s->scntl2;
break;
case 0x03: /* SCNTL3 */
return s->scntl3;
ret = s->scntl3;
break;
case 0x04: /* SCID */
return s->scid;
ret = s->scid;
break;
case 0x05: /* SXFER */
return s->sxfer;
ret = s->sxfer;
break;
case 0x06: /* SDID */
return s->sdid;
ret = s->sdid;
break;
case 0x07: /* GPREG0 */
return 0x7f;
ret = 0x7f;
break;
case 0x08: /* Revision ID */
return 0x00;
ret = 0x00;
break;
case 0x09: /* SOCL */
return s->socl;
ret = s->socl;
break;
case 0xa: /* SSID */
return s->ssid;
ret = s->ssid;
break;
case 0xb: /* SBCL */
/* ??? This is not correct. However it's (hopefully) only
used for diagnostics, so should be ok. */
return 0;
ret = 0;
break;
case 0xc: /* DSTAT */
tmp = s->dstat | LSI_DSTAT_DFE;
ret = s->dstat | LSI_DSTAT_DFE;
if ((s->istat0 & LSI_ISTAT0_INTF) == 0)
s->dstat = 0;
lsi_update_irq(s);
return tmp;
break;
case 0x0d: /* SSTAT0 */
return s->sstat0;
ret = s->sstat0;
break;
case 0x0e: /* SSTAT1 */
return s->sstat1;
ret = s->sstat1;
break;
case 0x0f: /* SSTAT2 */
return s->scntl1 & LSI_SCNTL1_CON ? 0 : 2;
ret = s->scntl1 & LSI_SCNTL1_CON ? 0 : 2;
break;
CASE_GET_REG32(dsa, 0x10)
case 0x14: /* ISTAT0 */
return s->istat0;
ret = s->istat0;
break;
case 0x15: /* ISTAT1 */
return s->istat1;
ret = s->istat1;
break;
case 0x16: /* MBOX0 */
return s->mbox0;
ret = s->mbox0;
break;
case 0x17: /* MBOX1 */
return s->mbox1;
ret = s->mbox1;
break;
case 0x18: /* CTEST0 */
return 0xff;
ret = 0xff;
break;
case 0x19: /* CTEST1 */
return 0;
ret = 0;
break;
case 0x1a: /* CTEST2 */
tmp = s->ctest2 | LSI_CTEST2_DACK | LSI_CTEST2_CM;
ret = s->ctest2 | LSI_CTEST2_DACK | LSI_CTEST2_CM;
if (s->istat0 & LSI_ISTAT0_SIGP) {
s->istat0 &= ~LSI_ISTAT0_SIGP;
tmp |= LSI_CTEST2_SIGP;
ret |= LSI_CTEST2_SIGP;
}
return tmp;
break;
case 0x1b: /* CTEST3 */
return s->ctest3;
ret = s->ctest3;
break;
CASE_GET_REG32(temp, 0x1c)
case 0x20: /* DFIFO */
return 0;
ret = 0;
break;
case 0x21: /* CTEST4 */
return s->ctest4;
ret = s->ctest4;
break;
case 0x22: /* CTEST5 */
return s->ctest5;
ret = s->ctest5;
break;
case 0x23: /* CTEST6 */
return 0;
ret = 0;
break;
CASE_GET_REG24(dbc, 0x24)
case 0x27: /* DCMD */
return s->dcmd;
ret = s->dcmd;
break;
CASE_GET_REG32(dnad, 0x28)
CASE_GET_REG32(dsp, 0x2c)
CASE_GET_REG32(dsps, 0x30)
CASE_GET_REG32(scratch[0], 0x34)
case 0x38: /* DMODE */
return s->dmode;
ret = s->dmode;
break;
case 0x39: /* DIEN */
return s->dien;
ret = s->dien;
break;
case 0x3a: /* SBR */
return s->sbr;
ret = s->sbr;
break;
case 0x3b: /* DCNTL */
return s->dcntl;
ret = s->dcntl;
break;
/* ADDER Output (Debug of relative jump address) */
CASE_GET_REG32(adder, 0x3c)
case 0x40: /* SIEN0 */
return s->sien0;
ret = s->sien0;
break;
case 0x41: /* SIEN1 */
return s->sien1;
ret = s->sien1;
break;
case 0x42: /* SIST0 */
tmp = s->sist0;
ret = s->sist0;
s->sist0 = 0;
lsi_update_irq(s);
return tmp;
break;
case 0x43: /* SIST1 */
tmp = s->sist1;
ret = s->sist1;
s->sist1 = 0;
lsi_update_irq(s);
return tmp;
break;
case 0x46: /* MACNTL */
return 0x0f;
ret = 0x0f;
break;
case 0x47: /* GPCNTL0 */
return 0x0f;
ret = 0x0f;
break;
case 0x48: /* STIME0 */
return s->stime0;
ret = s->stime0;
break;
case 0x4a: /* RESPID0 */
return s->respid0;
ret = s->respid0;
break;
case 0x4b: /* RESPID1 */
return s->respid1;
ret = s->respid1;
break;
case 0x4d: /* STEST1 */
return s->stest1;
ret = s->stest1;
break;
case 0x4e: /* STEST2 */
return s->stest2;
ret = s->stest2;
break;
case 0x4f: /* STEST3 */
return s->stest3;
ret = s->stest3;
break;
case 0x50: /* SIDL */
/* This is needed by the linux drivers. We currently only update it
during the MSG IN phase. */
return s->sidl;
ret = s->sidl;
break;
case 0x52: /* STEST4 */
return 0xe0;
ret = 0xe0;
break;
case 0x56: /* CCNTL0 */
return s->ccntl0;
ret = s->ccntl0;
break;
case 0x57: /* CCNTL1 */
return s->ccntl1;
ret = s->ccntl1;
break;
case 0x58: /* SBDL */
/* Some drivers peek at the data bus during the MSG IN phase. */
if ((s->sstat1 & PHASE_MASK) == PHASE_MI)
return s->msg[0];
return 0;
ret = 0;
break;
case 0x59: /* SBDL high */
return 0;
ret = 0;
break;
CASE_GET_REG32(mmrs, 0xa0)
CASE_GET_REG32(mmws, 0xa4)
CASE_GET_REG32(sfs, 0xa8)
......@@ -1643,18 +1705,28 @@ static uint8_t lsi_reg_readb(LSIState *s, int offset)
CASE_GET_REG32(ia, 0xd4)
CASE_GET_REG32(sbc, 0xd8)
CASE_GET_REG32(csbc, 0xdc)
}
if (offset >= 0x5c && offset < 0xa0) {
case 0x5c ... 0x9f:
{
int n;
int shift;
n = (offset - 0x58) >> 2;
shift = (offset & 3) * 8;
return (s->scratch[n] >> shift) & 0xff;
ret = (s->scratch[n] >> shift) & 0xff;
break;
}
default:
BADF("readb 0x%x\n", offset);
exit(1);
}
BADF("readb 0x%x\n", offset);
exit(1);
#undef CASE_GET_REG24
#undef CASE_GET_REG32
#ifdef DEBUG_LSI_REG
DPRINTF("Read reg %s %x = %02x\n",
offset < ARRAY_SIZE(names) ? names[offset] : "???", offset, ret);
#endif
return ret;
}
static void lsi_reg_writeb(LSIState *s, int offset, uint8_t val)
......@@ -1671,7 +1743,8 @@ static void lsi_reg_writeb(LSIState *s, int offset, uint8_t val)
case addr + 3: s->name &= 0x00ffffff; s->name |= val << 24; break;
#ifdef DEBUG_LSI_REG
DPRINTF("Write reg %x = %02x\n", offset, val);
DPRINTF("Write reg %s %x = %02x\n",
offset < ARRAY_SIZE(names) ? names[offset] : "???", offset, val);
#endif
switch (offset) {
case 0x00: /* SCNTL0 */
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或