Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20170210' into staging

target-arm queue:
 * aspeed: minor fixes
 * virt: declare fwcfg and virtio-mmio as DMA coherent in DT & ACPI
 * arm: enable basic TCG emulation of PMU for AArch64

# gpg: Signature made Fri 10 Feb 2017 18:06:30 GMT
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20170210:
  aspeed/smc: use a modulo to check segment limits
  aspeed/smc: handle dummies only in fast read mode
  aspeed: remove useless comment on controller segment size
  aspeed: check for negative values returned by blk_getlength()
  hw/arm/virt: Declare fwcfg as dma cache coherent in dt
  hw/arm/virt: Declare fwcfg as dma cache coherent in ACPI
  hw/arm/virt: Declare virtio-mmio as dma cache coherent in ACPI
  target-arm: Declare virtio-mmio as dma-coherent in dt
  target-arm: Enable vPMU support under TCG mode
  target-arm: Add support for PMU register PMINTENSET_EL1
  target-arm: Add support for AArch64 PMU register PMXEVTYPER_EL0
  target-arm: Add support for PMU register PMSELR_EL0
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

hw/arm/aspeed.c

@@ -113,9 +113,19 @@ static void write_boot_rom(DriveInfo *dinfo, hwaddr addr, size_t rom_size,
 {
     BlockBackend *blk = blk_by_legacy_dinfo(dinfo);
     uint8_t *storage;
+    int64_t size;
 
-    if (rom_size > blk_getlength(blk)) {
-        rom_size = blk_getlength(blk);
+    /* The block backend size should have already been 'validated' by
+     * the creation of the m25p80 object.
+     */
+    size = blk_getlength(blk);
+    if (size <= 0) {
+        error_setg(errp, "failed to get flash size");
+        return;
+    }
+
+    if (rom_size > size) {
+        rom_size = size;
     }
 
     storage = g_new0(uint8_t, rom_size);
@@ -138,10 +148,6 @@ static void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype,
         DriveInfo *dinfo = drive_get_next(IF_MTD);
         qemu_irq cs_line;
 
-        /*
-         * FIXME: check that we are not using a flash module exceeding
-         * the controller segment size
-         */
         fl->flash = ssi_create_slave_no_init(s->spi, flashtype);
         if (dinfo) {
             qdev_prop_set_drive(fl->flash, "drive", blk_by_legacy_dinfo(dinfo),
@@ -200,7 +206,9 @@ static void aspeed_board_init(MachineState *machine,
 
         /*
          * create a ROM region using the default mapping window size of
-         * the flash module.
+         * the flash module. The window size is 64MB for the AST2400
+         * SoC and 128MB for the AST2500 SoC, which is twice as big as
+         * needed by the flash modules of the Aspeed machines.
          */
         memory_region_init_rom(boot_rom, OBJECT(bmc), "aspeed.boot_rom",
                                fl->size, &error_abort);

hw/arm/vexpress.c

@@ -452,6 +452,7 @@ static int add_virtio_mmio_node(void *fdt, uint32_t acells, uint32_t scells,
                                        acells, addr, scells, size);
     qemu_fdt_setprop_cells(fdt, nodename, "interrupt-parent", intc);
     qemu_fdt_setprop_cells(fdt, nodename, "interrupts", 0, irq, 1);
+    qemu_fdt_setprop(fdt, nodename, "dma-coherent", NULL, 0);
     g_free(nodename);
     if (rc) {
         return -1;

hw/arm/virt-acpi-build.c

@@ -90,6 +90,7 @@ static void acpi_dsdt_add_fw_cfg(Aml *scope, const MemMapEntry *fw_cfg_memmap)
     aml_append(dev, aml_name_decl("_HID", aml_string("QEMU0002")));
     /* device present, functioning, decoding, not shown in UI */
     aml_append(dev, aml_name_decl("_STA", aml_int(0xB)));
+    aml_append(dev, aml_name_decl("_CCA", aml_int(1)));
 
     Aml *crs = aml_resource_template();
     aml_append(crs, aml_memory32_fixed(fw_cfg_memmap->base,
@@ -135,6 +136,7 @@ static void acpi_dsdt_add_virtio(Aml *scope,
         Aml *dev = aml_device("VR%02u", i);
         aml_append(dev, aml_name_decl("_HID", aml_string("LNRO0005")));
         aml_append(dev, aml_name_decl("_UID", aml_int(i)));
+        aml_append(dev, aml_name_decl("_CCA", aml_int(1)));
 
         Aml *crs = aml_resource_template();
         aml_append(crs, aml_memory32_fixed(base, size, AML_READ_WRITE));

hw/arm/virt.c

@@ -471,7 +471,7 @@ static void fdt_add_pmu_nodes(const VirtMachineState *vms)
     CPU_FOREACH(cpu) {
         armcpu = ARM_CPU(cpu);
         if (!arm_feature(&armcpu->env, ARM_FEATURE_PMU) ||
-            !kvm_arm_pmu_create(cpu, PPI(VIRTUAL_PMU_IRQ))) {
+            (kvm_enabled() && !kvm_arm_pmu_create(cpu, PPI(VIRTUAL_PMU_IRQ)))) {
             return;
         }
     }
@@ -797,6 +797,7 @@ static void create_virtio_devices(const VirtMachineState *vms, qemu_irq *pic)
         qemu_fdt_setprop_cells(vms->fdt, nodename, "interrupts",
                                GIC_FDT_IRQ_TYPE_SPI, irq,
                                GIC_FDT_IRQ_FLAGS_EDGE_LO_HI);
+        qemu_fdt_setprop(vms->fdt, nodename, "dma-coherent", NULL, 0);
         g_free(nodename);
     }
 }
@@ -928,6 +929,7 @@ static FWCfgState *create_fw_cfg(const VirtMachineState *vms, AddressSpace *as)
                             "compatible", "qemu,fw-cfg-mmio");
     qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg",
                                  2, base, 2, size);
+    qemu_fdt_setprop(vms->fdt, nodename, "dma-coherent", NULL, 0);
     g_free(nodename);
     return fw_cfg;
 }

hw/ssi/aspeed_smc.c

@@ -475,15 +475,15 @@ static uint32_t aspeed_smc_check_segment_addr(const AspeedSMCFlash *fl,
     AspeedSegments seg;
 
     aspeed_smc_reg_to_segment(s->regs[R_SEG_ADDR0 + fl->id], &seg);
-    if ((addr & (seg.size - 1)) != addr) {
+    if ((addr % seg.size) != addr) {
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: invalid address 0x%08x for CS%d segment : "
                       "[ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]\n",
                       s->ctrl->name, addr, fl->id, seg.addr,
                       seg.addr + seg.size);
+        addr %= seg.size;
     }
 
-    addr &= seg.size - 1;
     return addr;
 }
 
@@ -536,10 +536,13 @@ static uint64_t aspeed_smc_flash_read(void *opaque, hwaddr addr, unsigned size)
         /*
          * Use fake transfers to model dummy bytes. The value should
          * be configured to some non-zero value in fast read mode and
-         * zero in read mode.
+         * zero in read mode. But, as the HW allows inconsistent
+         * settings, let's check for fast read mode.
          */
-        for (i = 0; i < aspeed_smc_flash_dummies(fl); i++) {
-            ssi_transfer(fl->controller->spi, 0xFF);
+        if (aspeed_smc_flash_mode(fl) == CTRL_FREADMODE) {
+            for (i = 0; i < aspeed_smc_flash_dummies(fl); i++) {
+                ssi_transfer(fl->controller->spi, 0xFF);
+            }
         }
 
         for (i = 0; i < size; i++) {

target/arm/cpu.c

@@ -781,7 +781,7 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
         unset_feature(env, ARM_FEATURE_EL2);
     }
 
-    if (!cpu->has_pmu || !kvm_enabled()) {
+    if (!cpu->has_pmu) {
         cpu->has_pmu = false;
         unset_feature(env, ARM_FEATURE_PMU);
     }

target/arm/cpu.h

@@ -307,9 +307,9 @@ typedef struct CPUARMState {
         uint64_t c9_pmcr; /* performance monitor control register */
         uint64_t c9_pmcnten; /* perf monitor counter enables */
         uint32_t c9_pmovsr; /* perf monitor overflow status */
-        uint32_t c9_pmxevtyper; /* perf monitor event type */
         uint32_t c9_pmuserenr; /* perf monitor user enable */
-        uint32_t c9_pminten; /* perf monitor interrupt enables */
+        uint64_t c9_pmselr; /* perf monitor counter selection register */
+        uint64_t c9_pminten; /* perf monitor interrupt enables */
         union { /* Memory attribute redirection */
             struct {
 #ifdef HOST_WORDS_BIGENDIAN

target/arm/helper.c

@@ -975,6 +975,17 @@ static uint64_t pmccntr_read(CPUARMState *env, const ARMCPRegInfo *ri)
     return total_ticks - env->cp15.c15_ccnt;
 }
 
+static void pmselr_write(CPUARMState *env, const ARMCPRegInfo *ri,
+                         uint64_t value)
+{
+    /* The value of PMSELR.SEL affects the behavior of PMXEVTYPER and
+     * PMXEVCNTR. We allow [0..31] to be written to PMSELR here; in the
+     * meanwhile, we check PMSELR.SEL when PMXEVTYPER and PMXEVCNTR are
+     * accessed.
+     */
+    env->cp15.c9_pmselr = value & 0x1f;
+}
+
 static void pmccntr_write(CPUARMState *env, const ARMCPRegInfo *ri,
                         uint64_t value)
 {
@@ -1043,7 +1054,25 @@ static void pmovsr_write(CPUARMState *env, const ARMCPRegInfo *ri,
 static void pmxevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri,
                              uint64_t value)
 {
-    env->cp15.c9_pmxevtyper = value & 0xff;
+    /* Attempts to access PMXEVTYPER are CONSTRAINED UNPREDICTABLE when
+     * PMSELR value is equal to or greater than the number of implemented
+     * counters, but not equal to 0x1f. We opt to behave as a RAZ/WI.
+     */
+    if (env->cp15.c9_pmselr == 0x1f) {
+        pmccfiltr_write(env, ri, value);
+    }
+}
+
+static uint64_t pmxevtyper_read(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+    /* We opt to behave as a RAZ/WI when attempts to access PMXEVTYPER
+     * are CONSTRAINED UNPREDICTABLE. See comments in pmxevtyper_write().
+     */
+    if (env->cp15.c9_pmselr == 0x1f) {
+        return env->cp15.pmccfiltr_el0;
+    } else {
+        return 0;
+    }
 }
 
 static void pmuserenr_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -1194,13 +1223,17 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
     /* Unimplemented so WI. */
     { .name = "PMSWINC", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 4,
       .access = PL0_W, .accessfn = pmreg_access, .type = ARM_CP_NOP },
-    /* Since we don't implement any events, writing to PMSELR is UNPREDICTABLE.
-     * We choose to RAZ/WI.
-     */
-    { .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5,
-      .access = PL0_RW, .type = ARM_CP_CONST, .resetvalue = 0,
-      .accessfn = pmreg_access },
 #ifndef CONFIG_USER_ONLY
+    { .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5,
+      .access = PL0_RW, .type = ARM_CP_ALIAS,
+      .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmselr),
+      .accessfn = pmreg_access, .writefn = pmselr_write,
+      .raw_writefn = raw_write},
+    { .name = "PMSELR_EL0", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 5,
+      .access = PL0_RW, .accessfn = pmreg_access,
+      .fieldoffset = offsetof(CPUARMState, cp15.c9_pmselr),
+      .writefn = pmselr_write, .raw_writefn = raw_write, },
     { .name = "PMCCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 0,
       .access = PL0_RW, .resetvalue = 0, .type = ARM_CP_IO,
       .readfn = pmccntr_read, .writefn = pmccntr_write32,
@@ -1219,10 +1252,12 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
       .fieldoffset = offsetof(CPUARMState, cp15.pmccfiltr_el0),
       .resetvalue = 0, },
     { .name = "PMXEVTYPER", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 1,
-      .access = PL0_RW,
-      .fieldoffset = offsetof(CPUARMState, cp15.c9_pmxevtyper),
-      .accessfn = pmreg_access, .writefn = pmxevtyper_write,
-      .raw_writefn = raw_write },
+      .access = PL0_RW, .type = ARM_CP_NO_RAW, .accessfn = pmreg_access,
+      .writefn = pmxevtyper_write, .readfn = pmxevtyper_read },
+    { .name = "PMXEVTYPER_EL0", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 13, .opc2 = 1,
+      .access = PL0_RW, .type = ARM_CP_NO_RAW, .accessfn = pmreg_access,
+      .writefn = pmxevtyper_write, .readfn = pmxevtyper_read },
     /* Unimplemented, RAZ/WI. */
     { .name = "PMXEVCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 2,
       .access = PL0_RW, .type = ARM_CP_CONST, .resetvalue = 0,
@@ -1240,9 +1275,17 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
       .writefn = pmuserenr_write, .raw_writefn = raw_write },
     { .name = "PMINTENSET", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 1,
       .access = PL1_RW, .accessfn = access_tpm,
-      .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
+      .type = ARM_CP_ALIAS,
+      .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pminten),
       .resetvalue = 0,
       .writefn = pmintenset_write, .raw_writefn = raw_write },
+    { .name = "PMINTENSET_EL1", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 1,
+      .access = PL1_RW, .accessfn = access_tpm,
+      .type = ARM_CP_IO,
+      .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
+      .writefn = pmintenset_write, .raw_writefn = raw_write,
+      .resetvalue = 0x0 },
     { .name = "PMINTENCLR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 2,
       .access = PL1_RW, .accessfn = access_tpm, .type = ARM_CP_ALIAS,
       .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
@@ -4590,12 +4633,7 @@ void register_cp_regs_for_features(ARMCPU *cpu)
             { .name = "ID_AA64DFR0_EL1", .state = ARM_CP_STATE_AA64,
               .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 0,
               .access = PL1_R, .type = ARM_CP_CONST,
-              /* We mask out the PMUVer field, because we don't currently
-               * implement the PMU. Not advertising it prevents the guest
-               * from trying to use it and getting UNDEFs on registers we
-               * don't implement.
-               */
-              .resetvalue = cpu->id_aa64dfr0 & ~0xf00 },
+              .resetvalue = cpu->id_aa64dfr0 },
             { .name = "ID_AA64DFR1_EL1", .state = ARM_CP_STATE_AA64,
               .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 1,
               .access = PL1_R, .type = ARM_CP_CONST,