提交 610c3c8a 编写于 作者: B balrog

Reset ARM cp15.c1_sys to default values. Fix XScale cp15 accesses.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3013 c046a42c-6fe2-441c-8c8c-71466251a162
上级 b6d7c3db
......@@ -83,6 +83,7 @@ typedef struct CPUARMState {
uint32_t c0_cachetype;
uint32_t c1_sys; /* System control register. */
uint32_t c1_coproc; /* Coprocessor access register. */
uint32_t c1_xscaleauxcr; /* XScale auxiliary control register. */
uint32_t c2_base; /* MMU translation table base. */
uint32_t c2_data; /* MPU data cachable bits. */
uint32_t c2_insn; /* MPU instruction cachable bits. */
......
......@@ -18,16 +18,19 @@ static void cpu_reset_model_id(CPUARMState *env, uint32_t id)
set_feature(env, ARM_FEATURE_VFP);
env->vfp.xregs[ARM_VFP_FPSID] = 0x41011090;
env->cp15.c0_cachetype = 0x1dd20d2;
env->cp15.c1_sys = 0x00090078;
break;
case ARM_CPUID_ARM946:
set_feature(env, ARM_FEATURE_MPU);
env->cp15.c0_cachetype = 0x0f004006;
env->cp15.c1_sys = 0x00000078;
break;
case ARM_CPUID_ARM1026:
set_feature(env, ARM_FEATURE_VFP);
set_feature(env, ARM_FEATURE_AUXCR);
env->vfp.xregs[ARM_VFP_FPSID] = 0x410110a0;
env->cp15.c0_cachetype = 0x1dd20d2;
env->cp15.c1_sys = 0x00090078;
break;
case ARM_CPUID_PXA250:
case ARM_CPUID_PXA255:
......@@ -37,6 +40,7 @@ static void cpu_reset_model_id(CPUARMState *env, uint32_t id)
set_feature(env, ARM_FEATURE_XSCALE);
/* JTAG_ID is ((id << 28) | 0x09265013) */
env->cp15.c0_cachetype = 0xd172172;
env->cp15.c1_sys = 0x00000078;
break;
case ARM_CPUID_PXA270_A0:
case ARM_CPUID_PXA270_A1:
......@@ -49,6 +53,7 @@ static void cpu_reset_model_id(CPUARMState *env, uint32_t id)
set_feature(env, ARM_FEATURE_IWMMXT);
env->iwmmxt.cregs[ARM_IWMMXT_wCID] = 0x69051000 | 'Q';
env->cp15.c0_cachetype = 0xd172172;
env->cp15.c1_sys = 0x00000078;
break;
default:
cpu_abort(env, "Bad CPU ID: %x\n", id);
......@@ -637,6 +642,8 @@ void helper_set_cp15(CPUState *env, uint32_t insn, uint32_t val)
crm = insn & 0xf;
switch ((insn >> 16) & 0xf) {
case 0: /* ID codes. */
if (arm_feature(env, ARM_FEATURE_XSCALE))
break;
goto bad_reg;
case 1: /* System configuration. */
switch (op2) {
......@@ -648,12 +655,14 @@ void helper_set_cp15(CPUState *env, uint32_t insn, uint32_t val)
tlb_flush(env, 1);
break;
case 1:
/* XScale doesn't implement AUX CR (P-Bit) but allows
* writing with zero and reading. */
if (arm_feature(env, ARM_FEATURE_XSCALE))
if (arm_feature(env, ARM_FEATURE_XSCALE)) {
env->cp15.c1_xscaleauxcr = val;
break;
}
goto bad_reg;
case 2:
if (arm_feature(env, ARM_FEATURE_XSCALE))
goto bad_reg;
env->cp15.c1_coproc = val;
/* ??? Is this safe when called from within a TB? */
tb_flush(env);
......@@ -835,6 +844,8 @@ uint32_t helper_get_cp15(CPUState *env, uint32_t insn)
case 1: /* Cache Type. */
return env->cp15.c0_cachetype;
case 2: /* TCM status. */
if (arm_feature(env, ARM_FEATURE_XSCALE))
goto bad_reg;
return 0;
}
case 1: /* System configuration. */
......@@ -845,9 +856,11 @@ uint32_t helper_get_cp15(CPUState *env, uint32_t insn)
if (arm_feature(env, ARM_FEATURE_AUXCR))
return 1;
if (arm_feature(env, ARM_FEATURE_XSCALE))
return 0;
return env->cp15.c1_xscaleauxcr;
goto bad_reg;
case 2: /* Coprocessor access register. */
if (arm_feature(env, ARM_FEATURE_XSCALE))
goto bad_reg;
return env->cp15.c1_coproc;
default:
goto bad_reg;
......
......@@ -5717,6 +5717,7 @@ void cpu_save(QEMUFile *f, void *opaque)
qemu_put_be32(f, env->cp15.c0_cachetype);
qemu_put_be32(f, env->cp15.c1_sys);
qemu_put_be32(f, env->cp15.c1_coproc);
qemu_put_be32(f, env->cp15.c1_xscaleauxcr);
qemu_put_be32(f, env->cp15.c2_base);
qemu_put_be32(f, env->cp15.c2_data);
qemu_put_be32(f, env->cp15.c2_insn);
......@@ -5788,6 +5789,7 @@ int cpu_load(QEMUFile *f, void *opaque, int version_id)
env->cp15.c0_cachetype = qemu_get_be32(f);
env->cp15.c1_sys = qemu_get_be32(f);
env->cp15.c1_coproc = qemu_get_be32(f);
env->cp15.c1_xscaleauxcr = qemu_get_be32(f);
env->cp15.c2_base = qemu_get_be32(f);
env->cp15.c2_data = qemu_get_be32(f);
env->cp15.c2_insn = qemu_get_be32(f);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册