linux-user: move mips socket.h definitions to mips/sockbits.h

No code change.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180519092956.15134-2-laurent@vivier.eu>

linux-user/mips/sockbits.h

+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation, or (at your option) any
+ * later version. See the COPYING file in the top-level directory.
+ */
+
+#ifndef MIPS_SOCKBITS_H
+#define MIPS_SOCKBITS_H
+/* MIPS special values for constants */
+
+/*
+ * For setsockopt(2)
+ *
+ * This defines are ABI conformant as far as Linux supports these ...
+ */
+#define TARGET_SOL_SOCKET      0xffff
+
+#define TARGET_SO_DEBUG        0x0001  /* Record debugging information. */
+#define TARGET_SO_REUSEADDR    0x0004  /* Allow reuse of local addresses. */
+#define TARGET_SO_KEEPALIVE    0x0008  /* Keep connections alive and send
+                                          SIGPIPE when they die. */
+#define TARGET_SO_DONTROUTE    0x0010  /* Don't do local routing. */
+#define TARGET_SO_BROADCAST    0x0020  /* Allow transmission of
+                                          broadcast messages. */
+#define TARGET_SO_LINGER       0x0080  /* Block on close of a reliable
+                                        * socket to transmit pending data.
+                                        */
+#define TARGET_SO_OOBINLINE 0x0100     /* Receive out-of-band data in-band.
+                                        */
+#if 0
+/* To add: Allow local address and port reuse. */
+#define TARGET_SO_REUSEPORT 0x0200
+#endif
+
+#define TARGET_SO_TYPE         0x1008  /* Compatible name for SO_STYLE. */
+#define TARGET_SO_STYLE        SO_TYPE /* Synonym */
+#define TARGET_SO_ERROR        0x1007  /* get error status and clear */
+#define TARGET_SO_SNDBUF       0x1001  /* Send buffer size. */
+#define TARGET_SO_RCVBUF       0x1002  /* Receive buffer. */
+#define TARGET_SO_SNDLOWAT     0x1003  /* send low-water mark */
+#define TARGET_SO_RCVLOWAT     0x1004  /* receive low-water mark */
+#define TARGET_SO_SNDTIMEO     0x1005  /* send timeout */
+#define TARGET_SO_RCVTIMEO     0x1006  /* receive timeout */
+#define TARGET_SO_ACCEPTCONN   0x1009
+
+/* linux-specific, might as well be the same as on i386 */
+#define TARGET_SO_NO_CHECK     11
+#define TARGET_SO_PRIORITY     12
+#define TARGET_SO_BSDCOMPAT    14
+
+#define TARGET_SO_PASSCRED     17
+#define TARGET_SO_PEERCRED     18
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define TARGET_SO_SECURITY_AUTHENTICATION              22
+#define TARGET_SO_SECURITY_ENCRYPTION_TRANSPORT        23
+#define TARGET_SO_SECURITY_ENCRYPTION_NETWORK          24
+
+#define TARGET_SO_BINDTODEVICE         25
+
+/* Socket filtering */
+#define TARGET_SO_ATTACH_FILTER        26
+#define TARGET_SO_DETACH_FILTER        27
+
+#define TARGET_SO_PEERNAME             28
+#define TARGET_SO_TIMESTAMP            29
+#define SCM_TIMESTAMP          SO_TIMESTAMP
+
+#define TARGET_SO_PEERSEC              30
+#define TARGET_SO_SNDBUFFORCE          31
+#define TARGET_SO_RCVBUFFORCE          33
+#define TARGET_SO_PASSSEC              34
+
+/** sock_type - Socket types
+ *
+ * Please notice that for binary compat reasons MIPS has to
+ * override the enum sock_type in include/linux/net.h, so
+ * we define ARCH_HAS_SOCKET_TYPES here.
+ *
+ * @SOCK_DGRAM - datagram (conn.less) socket
+ * @SOCK_STREAM - stream (connection) socket
+ * @SOCK_RAW - raw socket
+ * @SOCK_RDM - reliably-delivered message
+ * @SOCK_SEQPACKET - sequential packet socket
+ * @SOCK_DCCP - Datagram Congestion Control Protocol socket
+ * @SOCK_PACKET - linux specific way of getting packets at the dev level.
+ *                For writing rarp and other similar things on the user
+ *                level.
+ * @SOCK_CLOEXEC - sets the close-on-exec (FD_CLOEXEC) flag.
+ * @SOCK_NONBLOCK - sets the O_NONBLOCK file status flag.
+ */
+
+#define ARCH_HAS_SOCKET_TYPES          1
+
+enum sock_type {
+       TARGET_SOCK_DGRAM       = 1,
+       TARGET_SOCK_STREAM      = 2,
+       TARGET_SOCK_RAW         = 3,
+       TARGET_SOCK_RDM         = 4,
+       TARGET_SOCK_SEQPACKET   = 5,
+       TARGET_SOCK_DCCP        = 6,
+       TARGET_SOCK_PACKET      = 10,
+       TARGET_SOCK_CLOEXEC     = 02000000,
+       TARGET_SOCK_NONBLOCK    = 0200,
+};
+
+#define TARGET_SOCK_MAX (TARGET_SOCK_PACKET + 1)
+#define TARGET_SOCK_TYPE_MASK    0xf  /* Covers up to TARGET_SOCK_MAX-1. */
+#endif

linux-user/mips64/sockbits.h

+#include "../mips/sockbits.h"

linux-user/socket.h

 
-#if defined(TARGET_MIPS)
-    /* MIPS special values for constants */
-
-    /*
-     * For setsockopt(2)
-     *
-     * This defines are ABI conformant as far as Linux supports these ...
-     */
-    #define TARGET_SOL_SOCKET      0xffff
-
-    #define TARGET_SO_DEBUG        0x0001  /* Record debugging information. */
-    #define TARGET_SO_REUSEADDR    0x0004  /* Allow reuse of local addresses. */
-    #define TARGET_SO_KEEPALIVE    0x0008  /* Keep connections alive and send
-                                              SIGPIPE when they die. */
-    #define TARGET_SO_DONTROUTE    0x0010  /* Don't do local routing. */
-    #define TARGET_SO_BROADCAST    0x0020  /* Allow transmission of
-                                              broadcast messages. */
-    #define TARGET_SO_LINGER       0x0080  /* Block on close of a reliable
-                                            * socket to transmit pending data.
-                                            */
-    #define TARGET_SO_OOBINLINE 0x0100     /* Receive out-of-band data in-band.
-                                            */
-    #if 0
-    /* To add: Allow local address and port reuse. */
-    #define TARGET_SO_REUSEPORT 0x0200
-    #endif
-
-    #define TARGET_SO_TYPE         0x1008  /* Compatible name for SO_STYLE. */
-    #define TARGET_SO_STYLE        SO_TYPE /* Synonym */
-    #define TARGET_SO_ERROR        0x1007  /* get error status and clear */
-    #define TARGET_SO_SNDBUF       0x1001  /* Send buffer size. */
-    #define TARGET_SO_RCVBUF       0x1002  /* Receive buffer. */
-    #define TARGET_SO_SNDLOWAT     0x1003  /* send low-water mark */
-    #define TARGET_SO_RCVLOWAT     0x1004  /* receive low-water mark */
-    #define TARGET_SO_SNDTIMEO     0x1005  /* send timeout */
-    #define TARGET_SO_RCVTIMEO     0x1006  /* receive timeout */
-    #define TARGET_SO_ACCEPTCONN   0x1009
-
-    /* linux-specific, might as well be the same as on i386 */
-    #define TARGET_SO_NO_CHECK     11
-    #define TARGET_SO_PRIORITY     12
-    #define TARGET_SO_BSDCOMPAT    14
-
-    #define TARGET_SO_PASSCRED     17
-    #define TARGET_SO_PEERCRED     18
-
-    /* Security levels - as per NRL IPv6 - don't actually do anything */
-    #define TARGET_SO_SECURITY_AUTHENTICATION              22
-    #define TARGET_SO_SECURITY_ENCRYPTION_TRANSPORT        23
-    #define TARGET_SO_SECURITY_ENCRYPTION_NETWORK          24
-
-    #define TARGET_SO_BINDTODEVICE         25
-
-    /* Socket filtering */
-    #define TARGET_SO_ATTACH_FILTER        26
-    #define TARGET_SO_DETACH_FILTER        27
-
-    #define TARGET_SO_PEERNAME             28
-    #define TARGET_SO_TIMESTAMP            29
-    #define SCM_TIMESTAMP          SO_TIMESTAMP
-
-    #define TARGET_SO_PEERSEC              30
-    #define TARGET_SO_SNDBUFFORCE          31
-    #define TARGET_SO_RCVBUFFORCE          33
-    #define TARGET_SO_PASSSEC              34
-
-    /** sock_type - Socket types
-     *
-     * Please notice that for binary compat reasons MIPS has to
-     * override the enum sock_type in include/linux/net.h, so
-     * we define ARCH_HAS_SOCKET_TYPES here.
-     *
-     * @SOCK_DGRAM - datagram (conn.less) socket
-     * @SOCK_STREAM - stream (connection) socket
-     * @SOCK_RAW - raw socket
-     * @SOCK_RDM - reliably-delivered message
-     * @SOCK_SEQPACKET - sequential packet socket
-     * @SOCK_DCCP - Datagram Congestion Control Protocol socket
-     * @SOCK_PACKET - linux specific way of getting packets at the dev level.
-     *                For writing rarp and other similar things on the user
-     *                level.
-     * @SOCK_CLOEXEC - sets the close-on-exec (FD_CLOEXEC) flag.
-     * @SOCK_NONBLOCK - sets the O_NONBLOCK file status flag.
-     */
-
-    #define ARCH_HAS_SOCKET_TYPES          1
-
-    enum sock_type {
-           TARGET_SOCK_DGRAM       = 1,
-           TARGET_SOCK_STREAM      = 2,
-           TARGET_SOCK_RAW         = 3,
-           TARGET_SOCK_RDM         = 4,
-           TARGET_SOCK_SEQPACKET   = 5,
-           TARGET_SOCK_DCCP        = 6,
-           TARGET_SOCK_PACKET      = 10,
-           TARGET_SOCK_CLOEXEC     = 02000000,
-           TARGET_SOCK_NONBLOCK    = 0200,
-    };
-
-    #define TARGET_SOCK_MAX (TARGET_SOCK_PACKET + 1)
-    #define TARGET_SOCK_TYPE_MASK    0xf  /* Covers up to TARGET_SOCK_MAX-1. */
-
+#if defined(TARGET_MIPS) || defined(TARGET_HPPA)
+#include "sockbits.h"
 #elif defined(TARGET_ALPHA)
 
     /* For setsockopt(2) */
@@ -205,8 +105,6 @@
 
     #define TARGET_SOCK_MAX (TARGET_SOCK_PACKET + 1)
     #define TARGET_SOCK_TYPE_MASK    0xf  /* Covers up to TARGET_SOCK_MAX-1. */
-#elif defined(TARGET_HPPA)
-#include <hppa/sockbits.h>
 #else
 
 #if defined(TARGET_SPARC)