提交 56d7305d 编写于 作者: P Peter Maydell

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.10-20170823' into staging

ppc patch queue 2017-08-23

This is identical to the pull request from yesterday (20180822),
except that a bug in one patch is fixed so that it doesn't break TCG
on a ppc host.

Last minute ppc related fixes for qemu-2.10.  I'm not sure if these
are critical enough to prompt another rc, but I'm submitting them for
consideration.

First, is Cornelia's fix for 480bc11e which meant "make check" would
always fail on a ppc host.  Tracking that down delayed submission of
the rest of these patches, sorry.

The rest are all fairly important bugfixes for qemu crashes or guest
behaviour regression on ppc.  Patches 2-4 specifically are fixes for
regressions from qemu-2.9, caused by the compatibility mode and
hotplug handling cleanups for the pseries machine type.

# gpg: Signature made Wed 23 Aug 2017 01:31:47 BST
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.10-20170823:
  hw/ppc/spapr_iommu: Fix crash when removing the "spapr-tce-table" device
  hw/ppc/spapr_rtc: Mark the RTC device with user_creatable = false
  hw/ppc/spapr: Fix segfault when instantiating a 'pc-dimm' without 'memdev'
  spapr: Allow configure-connector to be called multiple times
  ppc: fix ppc_set_compat() with KVM PR
  target/ppc: 'PVR != host PVR' in KVM_SET_SREGS workaround
  boot-serial-test: prefer tcg accelerator
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
......@@ -1691,10 +1691,15 @@ static void pc_dimm_plug(HotplugHandler *hotplug_dev,
PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
PCDIMMDevice *dimm = PC_DIMM(dev);
PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(dimm);
MemoryRegion *mr = ddc->get_memory_region(dimm);
MemoryRegion *mr;
uint64_t align = TARGET_PAGE_SIZE;
bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM);
mr = ddc->get_memory_region(dimm, &local_err);
if (local_err) {
goto out;
}
if (memory_region_get_alignment(mr) && pcmc->enforce_aligned_dimm) {
align = memory_region_get_alignment(mr);
}
......@@ -1758,10 +1763,15 @@ static void pc_dimm_unplug(HotplugHandler *hotplug_dev,
PCMachineState *pcms = PC_MACHINE(hotplug_dev);
PCDIMMDevice *dimm = PC_DIMM(dev);
PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(dimm);
MemoryRegion *mr = ddc->get_memory_region(dimm);
MemoryRegion *mr;
HotplugHandlerClass *hhc;
Error *local_err = NULL;
mr = ddc->get_memory_region(dimm, &local_err);
if (local_err) {
goto out;
}
hhc = HOTPLUG_HANDLER_GET_CLASS(pcms->acpi_dev);
hhc->unplug(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &local_err);
......
......@@ -71,7 +71,7 @@ static void nvdimm_init(Object *obj)
NULL, NULL);
}
static MemoryRegion *nvdimm_get_memory_region(PCDIMMDevice *dimm)
static MemoryRegion *nvdimm_get_memory_region(PCDIMMDevice *dimm, Error **errp)
{
NVDIMMDevice *nvdimm = NVDIMM(dimm);
......
......@@ -363,7 +363,10 @@ static void pc_dimm_get_size(Object *obj, Visitor *v, const char *name,
PCDIMMDevice *dimm = PC_DIMM(obj);
PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(obj);
mr = ddc->get_memory_region(dimm);
mr = ddc->get_memory_region(dimm, errp);
if (!mr) {
return;
}
value = memory_region_size(mr);
visit_type_uint64(v, name, &value, errp);
......@@ -411,9 +414,14 @@ static void pc_dimm_unrealize(DeviceState *dev, Error **errp)
host_memory_backend_set_mapped(dimm->hostmem, false);
}
static MemoryRegion *pc_dimm_get_memory_region(PCDIMMDevice *dimm)
static MemoryRegion *pc_dimm_get_memory_region(PCDIMMDevice *dimm, Error **errp)
{
return host_memory_backend_get_memory(dimm->hostmem, &error_abort);
if (!dimm->hostmem) {
error_setg(errp, "'" PC_DIMM_MEMDEV_PROP "' property must be set");
return NULL;
}
return host_memory_backend_get_memory(dimm->hostmem, errp);
}
static MemoryRegion *pc_dimm_get_vmstate_memory_region(PCDIMMDevice *dimm)
......
......@@ -2772,10 +2772,15 @@ static void spapr_memory_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
sPAPRMachineState *ms = SPAPR_MACHINE(hotplug_dev);
PCDIMMDevice *dimm = PC_DIMM(dev);
PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(dimm);
MemoryRegion *mr = ddc->get_memory_region(dimm);
uint64_t align = memory_region_get_alignment(mr);
uint64_t size = memory_region_size(mr);
uint64_t addr;
MemoryRegion *mr;
uint64_t align, size, addr;
mr = ddc->get_memory_region(dimm, &local_err);
if (local_err) {
goto out;
}
align = memory_region_get_alignment(mr);
size = memory_region_size(mr);
pc_dimm_memory_plug(dev, &ms->hotplug_memory, mr, align, &local_err);
if (local_err) {
......@@ -2808,10 +2813,16 @@ static void spapr_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
{
PCDIMMDevice *dimm = PC_DIMM(dev);
PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(dimm);
MemoryRegion *mr = ddc->get_memory_region(dimm);
uint64_t size = memory_region_size(mr);
MemoryRegion *mr;
uint64_t size;
char *mem_dev;
mr = ddc->get_memory_region(dimm, errp);
if (!mr) {
return;
}
size = memory_region_size(mr);
if (size % SPAPR_MEMORY_BLOCK_SIZE) {
error_setg(errp, "Hotplugged memory size must be a multiple of "
"%lld MB", SPAPR_MEMORY_BLOCK_SIZE / M_BYTE);
......@@ -2882,7 +2893,7 @@ static sPAPRDIMMState *spapr_recover_pending_dimm_state(sPAPRMachineState *ms,
{
sPAPRDRConnector *drc;
PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(dimm);
MemoryRegion *mr = ddc->get_memory_region(dimm);
MemoryRegion *mr = ddc->get_memory_region(dimm, &error_abort);
uint64_t size = memory_region_size(mr);
uint32_t nr_lmbs = size / SPAPR_MEMORY_BLOCK_SIZE;
uint32_t avail_lmbs = 0;
......@@ -2912,7 +2923,7 @@ void spapr_lmb_release(DeviceState *dev)
sPAPRMachineState *spapr = SPAPR_MACHINE(qdev_get_hotplug_handler(dev));
PCDIMMDevice *dimm = PC_DIMM(dev);
PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(dimm);
MemoryRegion *mr = ddc->get_memory_region(dimm);
MemoryRegion *mr = ddc->get_memory_region(dimm, &error_abort);
sPAPRDIMMState *ds = spapr_pending_dimm_unplugs_find(spapr, PC_DIMM(dev));
/* This information will get lost if a migration occurs
......@@ -2945,12 +2956,19 @@ static void spapr_memory_unplug_request(HotplugHandler *hotplug_dev,
Error *local_err = NULL;
PCDIMMDevice *dimm = PC_DIMM(dev);
PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(dimm);
MemoryRegion *mr = ddc->get_memory_region(dimm);
uint64_t size = memory_region_size(mr);
uint32_t nr_lmbs = size / SPAPR_MEMORY_BLOCK_SIZE;
uint64_t addr_start, addr;
MemoryRegion *mr;
uint32_t nr_lmbs;
uint64_t size, addr_start, addr;
int i;
sPAPRDRConnector *drc;
mr = ddc->get_memory_region(dimm, &local_err);
if (local_err) {
goto out;
}
size = memory_region_size(mr);
nr_lmbs = size / SPAPR_MEMORY_BLOCK_SIZE;
addr_start = object_property_get_uint(OBJECT(dimm), PC_DIMM_ADDR_PROP,
&local_err);
if (local_err) {
......
......@@ -442,12 +442,17 @@ void spapr_drc_reset(sPAPRDRConnector *drc)
if (drc->dev) {
/* A device present at reset is ready to go, same as coldplugged */
drc->state = drck->ready_state;
/*
* Ensure that we are able to send the FDT fragment again
* via configure-connector call if the guest requests.
*/
drc->ccs_offset = drc->fdt_start_offset;
drc->ccs_depth = 0;
} else {
drc->state = drck->empty_state;
drc->ccs_offset = -1;
drc->ccs_depth = -1;
}
drc->ccs_offset = -1;
drc->ccs_depth = -1;
}
static void drc_reset(void *opaque)
......@@ -1071,8 +1076,14 @@ static void rtas_ibm_configure_connector(PowerPCCPU *cpu,
}
if ((drc->state != SPAPR_DRC_STATE_LOGICAL_UNISOLATE)
&& (drc->state != SPAPR_DRC_STATE_PHYSICAL_UNISOLATE)) {
/* Need to unisolate the device before configuring */
&& (drc->state != SPAPR_DRC_STATE_PHYSICAL_UNISOLATE)
&& (drc->state != SPAPR_DRC_STATE_LOGICAL_CONFIGURED)
&& (drc->state != SPAPR_DRC_STATE_PHYSICAL_CONFIGURED)) {
/*
* Need to unisolate the device before configuring
* or it should already be in configured state to
* allow configure-connector be called repeatedly.
*/
rc = SPAPR_DR_CC_RESPONSE_NOT_CONFIGURABLE;
goto out;
}
......@@ -1108,8 +1119,13 @@ static void rtas_ibm_configure_connector(PowerPCCPU *cpu,
/* done sending the device tree, move to configured state */
trace_spapr_drc_set_configured(drc_index);
drc->state = drck->ready_state;
drc->ccs_offset = -1;
drc->ccs_depth = -1;
/*
* Ensure that we are able to send the FDT fragment
* again via configure-connector call if the guest requests.
*/
drc->ccs_offset = drc->fdt_start_offset;
drc->ccs_depth = 0;
fdt_offset_next = drc->fdt_start_offset;
resp = SPAPR_DR_CC_RESPONSE_SUCCESS;
} else {
resp = SPAPR_DR_CC_RESPONSE_PREV_PARENT;
......
......@@ -618,6 +618,8 @@ static void spapr_tce_table_class_init(ObjectClass *klass, void *data)
dc->init = spapr_tce_table_realize;
dc->reset = spapr_tce_reset;
dc->unrealize = spapr_tce_table_unrealize;
/* Reason: This is just an internal device for handling the hypercalls */
dc->user_creatable = false;
QLIST_INIT(&spapr_tce_tables);
......
......@@ -164,6 +164,8 @@ static void spapr_rtc_class_init(ObjectClass *oc, void *data)
dc->realize = spapr_rtc_realize;
dc->vmsd = &vmstate_spapr_rtc;
/* Reason: This is an internal device only for handling the hypercalls */
dc->user_creatable = false;
spapr_rtas_register(RTAS_GET_TIME_OF_DAY, "get-time-of-day",
rtas_get_time_of_day);
......
......@@ -71,7 +71,7 @@ typedef struct PCDIMMDeviceClass {
/* public */
void (*realize)(PCDIMMDevice *dimm, Error **errp);
MemoryRegion *(*get_memory_region)(PCDIMMDevice *dimm);
MemoryRegion *(*get_memory_region)(PCDIMMDevice *dimm, Error **errp);
MemoryRegion *(*get_vmstate_memory_region)(PCDIMMDevice *dimm);
} PCDIMMDeviceClass;
......
......@@ -140,16 +140,17 @@ void ppc_set_compat(PowerPCCPU *cpu, uint32_t compat_pvr, Error **errp)
cpu_synchronize_state(CPU(cpu));
cpu->compat_pvr = compat_pvr;
env->spr[SPR_PCR] = pcr & pcc->pcr_mask;
if (kvm_enabled()) {
if (kvm_enabled() && cpu->compat_pvr != compat_pvr) {
int ret = kvmppc_set_compat(cpu, cpu->compat_pvr);
if (ret < 0) {
error_setg_errno(errp, -ret,
"Unable to set CPU compatibility mode in KVM");
return;
}
}
cpu->compat_pvr = compat_pvr;
env->spr[SPR_PCR] = pcr & pcc->pcr_mask;
}
typedef struct {
......
......@@ -90,6 +90,7 @@ static int cap_htm; /* Hardware transactional memory support */
static int cap_mmu_radix;
static int cap_mmu_hash_v3;
static int cap_resize_hpt;
static int cap_ppc_pvr_compat;
static uint32_t debug_inst_opcode;
......@@ -147,6 +148,13 @@ int kvm_arch_init(MachineState *ms, KVMState *s)
cap_mmu_radix = kvm_vm_check_extension(s, KVM_CAP_PPC_MMU_RADIX);
cap_mmu_hash_v3 = kvm_vm_check_extension(s, KVM_CAP_PPC_MMU_HASH_V3);
cap_resize_hpt = kvm_vm_check_extension(s, KVM_CAP_SPAPR_RESIZE_HPT);
/*
* Note: setting it to false because there is not such capability
* in KVM at this moment.
*
* TODO: call kvm_vm_check_extension() with the right capability
* after the kernel starts implementing it.*/
cap_ppc_pvr_compat = false;
if (!cap_interrupt_level) {
fprintf(stderr, "KVM: Couldn't find level irq capability. Expect the "
......@@ -2785,3 +2793,33 @@ void kvmppc_update_sdr1(target_ulong sdr1)
run_on_cpu(cs, kvmppc_pivot_hpt_cpu, RUN_ON_CPU_TARGET_PTR(sdr1));
}
}
/*
* This is a helper function to detect a post migration scenario
* in which a guest, running as KVM-HV, freezes in cpu_post_load because
* the guest kernel can't handle a PVR value other than the actual host
* PVR in KVM_SET_SREGS, even if pvr_match() returns true.
*
* If we don't have cap_ppc_pvr_compat and we're not running in PR
* (so, we're HV), return true. The workaround itself is done in
* cpu_post_load.
*
* The order here is important: we'll only check for KVM PR as a
* fallback if the guest kernel can't handle the situation itself.
* We need to avoid as much as possible querying the running KVM type
* in QEMU level.
*/
bool kvmppc_pvr_workaround_required(PowerPCCPU *cpu)
{
CPUState *cs = CPU(cpu);
if (!kvm_enabled()) {
return false;
}
if (cap_ppc_pvr_compat) {
return false;
}
return !kvmppc_is_pr(cs->kvm_state);
}
......@@ -67,6 +67,7 @@ void kvmppc_check_papr_resize_hpt(Error **errp);
int kvmppc_resize_hpt_prepare(PowerPCCPU *cpu, target_ulong flags, int shift);
int kvmppc_resize_hpt_commit(PowerPCCPU *cpu, target_ulong flags, int shift);
void kvmppc_update_sdr1(target_ulong sdr1);
bool kvmppc_pvr_workaround_required(PowerPCCPU *cpu);
bool kvmppc_is_mem_backend_page_size_ok(const char *obj_path);
......
......@@ -9,6 +9,7 @@
#include "mmu-hash64.h"
#include "migration/cpu.h"
#include "qapi/error.h"
#include "kvm_ppc.h"
static int cpu_load_old(QEMUFile *f, void *opaque, int version_id)
{
......@@ -249,6 +250,27 @@ static int cpu_post_load(void *opaque, int version_id)
}
}
/*
* If we're running with KVM HV, there is a chance that the guest
* is running with KVM HV and its kernel does not have the
* capability of dealing with a different PVR other than this
* exact host PVR in KVM_SET_SREGS. If that happens, the
* guest freezes after migration.
*
* The function kvmppc_pvr_workaround_required does this verification
* by first checking if the kernel has the cap, returning true immediately
* if that is the case. Otherwise, it checks if we're running in KVM PR.
* If the guest kernel does not have the cap and we're not running KVM-PR
* (so, it is running KVM-HV), we need to ensure that KVM_SET_SREGS will
* receive the PVR it expects as a workaround.
*
*/
#if defined(CONFIG_KVM)
if (kvmppc_pvr_workaround_required(cpu)) {
env->spr[SPR_PVR] = env->spr_cb[SPR_PVR].default_value;
}
#endif
env->lr = env->spr[SPR_LR];
env->ctr = env->spr[SPR_CTR];
cpu_write_xer(env, env->spr[SPR_XER]);
......
......@@ -78,7 +78,11 @@ static void test_machine(const void *data)
fd = mkstemp(tmpname);
g_assert(fd != -1);
args = g_strdup_printf("-M %s,accel=kvm:tcg "
/*
* Make sure that this test uses tcg if available: It is used as a
* fast-enough smoketest for that.
*/
args = g_strdup_printf("-M %s,accel=tcg:kvm "
"-chardev file,id=serial0,path=%s "
"-no-shutdown -serial chardev:serial0 %s",
test->machine, tmpname, test->extra);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册