提交 5467a722 编写于 作者: B bellard

disabled S3 VGA


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@747 c046a42c-6fe2-441c-8c8c-71466251a162
上级 1b8eb456
......@@ -30,7 +30,8 @@
//#define DEBUG_S3
//#define DEBUG_BOCHS_VBE
#define CONFIG_S3VGA
/* S3 VGA is deprecated - another graphic card will be emulated */
//#define CONFIG_S3VGA
#define MSR_COLOR_EMULATION 0x01
#define MSR_PAGE_SELECT 0x20
......@@ -335,7 +336,7 @@ static uint32_t vga_ioport_read(void *opaque, uint32_t addr)
static void vga_ioport_write(void *opaque, uint32_t addr, uint32_t val)
{
VGAState *s = opaque;
int index, v;
int index;
/* check port range access depending on color/monochrome mode */
if ((addr >= 0x3b0 && addr <= 0x3bf && (s->msr & MSR_COLOR_EMULATION)) ||
......@@ -453,15 +454,21 @@ static void vga_ioport_write(void *opaque, uint32_t addr, uint32_t val)
break;
case 0x31:
/* update start address */
s->cr[s->cr_index] = val;
v = (val >> 4) & 3;
s->cr[0x69] = (s->cr[69] & ~0x03) | v;
{
int v;
s->cr[s->cr_index] = val;
v = (val >> 4) & 3;
s->cr[0x69] = (s->cr[69] & ~0x03) | v;
}
break;
case 0x51:
/* update start address */
s->cr[s->cr_index] = val;
v = val & 3;
s->cr[0x69] = (s->cr[69] & ~0x0c) | (v << 2);
{
int v;
s->cr[s->cr_index] = val;
v = val & 3;
s->cr[0x69] = (s->cr[69] & ~0x0c) | (v << 2);
}
break;
#endif
default:
......@@ -716,7 +723,7 @@ static uint32_t vga_mem_readl(uint32_t addr)
}
/* called for accesses between 0xa0000 and 0xc0000 */
static void vga_mem_writeb(uint32_t addr, uint32_t val, uint32_t vaddr)
static void vga_mem_writeb(uint32_t addr, uint32_t val)
{
VGAState *s = &vga_state;
int memory_map_mode, plane, write_mode, b, func_select;
......@@ -844,18 +851,18 @@ static void vga_mem_writeb(uint32_t addr, uint32_t val, uint32_t vaddr)
}
}
static void vga_mem_writew(uint32_t addr, uint32_t val, uint32_t vaddr)
static void vga_mem_writew(uint32_t addr, uint32_t val)
{
vga_mem_writeb(addr, val & 0xff, vaddr);
vga_mem_writeb(addr + 1, (val >> 8) & 0xff, vaddr);
vga_mem_writeb(addr, val & 0xff);
vga_mem_writeb(addr + 1, (val >> 8) & 0xff);
}
static void vga_mem_writel(uint32_t addr, uint32_t val, uint32_t vaddr)
static void vga_mem_writel(uint32_t addr, uint32_t val)
{
vga_mem_writeb(addr, val & 0xff, vaddr);
vga_mem_writeb(addr + 1, (val >> 8) & 0xff, vaddr);
vga_mem_writeb(addr + 2, (val >> 16) & 0xff, vaddr);
vga_mem_writeb(addr + 3, (val >> 24) & 0xff, vaddr);
vga_mem_writeb(addr, val & 0xff);
vga_mem_writeb(addr + 1, (val >> 8) & 0xff);
vga_mem_writeb(addr + 2, (val >> 16) & 0xff);
vga_mem_writeb(addr + 3, (val >> 24) & 0xff);
}
typedef void vga_draw_glyph8_func(uint8_t *d, int linesize,
......@@ -992,7 +999,7 @@ static int update_palette256(VGAState *s)
static int update_basic_params(VGAState *s)
{
int full_update;
uint32_t start_addr, line_offset, line_compare, v;
uint32_t start_addr, line_offset, line_compare;
full_update = 0;
......@@ -1006,10 +1013,13 @@ static int update_basic_params(VGAState *s)
/* compute line_offset in bytes */
line_offset = s->cr[0x13];
#ifdef CONFIG_S3VGA
v = (s->cr[0x51] >> 4) & 3; /* S3 extension */
if (v == 0)
v = (s->cr[0x43] >> 2) & 1; /* S3 extension */
line_offset |= (v << 8);
{
uinr32_t v;
v = (s->cr[0x51] >> 4) & 3; /* S3 extension */
if (v == 0)
v = (s->cr[0x43] >> 2) & 1; /* S3 extension */
line_offset |= (v << 8);
}
#endif
line_offset <<= 3;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册