提交 4de9b249 编写于 作者: T ths

Reworking MIPS interrupt handling, by Aurelien Jarno.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2350 c046a42c-6fe2-441c-8c8c-71466251a162
上级 30c4bbac
......@@ -376,7 +376,7 @@ VL_OBJS+= grackle_pci.o prep_pci.o unin_pci.o
CPPFLAGS += -DHAS_AUDIO
endif
ifeq ($(TARGET_ARCH), mips)
VL_OBJS+= mips_r4k.o mips_malta.o mips_timer.o dma.o vga.o serial.o i8254.o i8259.o
VL_OBJS+= mips_r4k.o mips_malta.o mips_timer.o mips_int.o dma.o vga.o serial.o i8254.o i8259.o
VL_OBJS+= ide.o gt64xxx.o pckbd.o ps2.o fdc.o mc146818rtc.o usb-uhci.o acpi.o
VL_OBJS+= piix_pci.o parallel.o mixeng.o cirrus_vga.o $(SOUND_HW) $(AUDIODRV)
DEFINES += -DHAS_AUDIO
......
......@@ -535,7 +535,6 @@ int cpu_exec(CPUState *env1)
env->exception_index = EXCP_EXT_INTERRUPT;
env->error_code = 0;
do_interrupt(env);
env->interrupt_request &= ~CPU_INTERRUPT_HARD;
#if defined(__sparc__) && !defined(HOST_SOLARIS)
tmp_T0 = 0;
#else
......
/*
* QEMU GT64120 PCI host
*
* Copyright (c) 2006 Aurelien Jarno
* Copyright (c) 2006,2007 Aurelien Jarno
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
......@@ -433,7 +433,8 @@ static uint32_t gt64120_readl (void *opaque,
val = s->regs[saddr];
break;
case GT_PCI0_IACK:
val = pic_intack_read(isa_pic);
/* Read the IRQ number */
val = pic_read_irq(isa_pic);
break;
/* SDRAM Parameters */
......
......@@ -161,6 +161,13 @@ void pic_update_irq(PicState2 *s)
#endif
s->irq_request(s->irq_request_opaque, 1);
}
/* all targets should do this rather than acking the IRQ in the cpu */
#if defined(TARGET_MIPS)
else {
s->irq_request(s->irq_request_opaque, 0);
}
#endif
}
#ifdef DEBUG_IRQ_LATENCY
......
#include "vl.h"
#include "cpu.h"
/* Raise IRQ to CPU if necessary. It must be called every time the active
IRQ may change */
void cpu_mips_update_irq(CPUState *env)
{
if ((env->CP0_Status & env->CP0_Cause & CP0Ca_IP_mask) &&
(env->CP0_Status & (1 << CP0St_IE)) &&
!(env->hflags & MIPS_HFLAG_EXL) &&
!(env->hflags & MIPS_HFLAG_ERL) &&
!(env->hflags & MIPS_HFLAG_DM)) {
if (! (env->interrupt_request & CPU_INTERRUPT_HARD)) {
cpu_interrupt(env, CPU_INTERRUPT_HARD);
}
} else {
cpu_reset_interrupt(env, CPU_INTERRUPT_HARD);
}
}
void cpu_mips_irq_request(void *opaque, int irq, int level)
{
CPUState *env = first_cpu;
uint32_t mask;
if (irq >= 16)
return;
mask = 1 << (irq + CP0Ca_IP);
if (level) {
env->CP0_Cause |= mask;
} else {
env->CP0_Cause &= ~mask;
}
cpu_mips_update_irq(env);
}
......@@ -54,16 +54,10 @@ typedef struct {
static PITState *pit;
/* The 8259 is attached to the MIPS CPU INT0 pin, ie interrupt 2 */
static void pic_irq_request(void *opaque, int level)
{
CPUState *env = first_cpu;
if (level) {
env->CP0_Cause |= 0x00000400;
cpu_interrupt(env, CPU_INTERRUPT_HARD);
} else {
env->CP0_Cause &= ~0x00000400;
cpu_reset_interrupt(env, CPU_INTERRUPT_HARD);
}
cpu_mips_irq_request(opaque, 2, level);
}
/* Malta FPGA */
......
......@@ -38,14 +38,7 @@ static PITState *pit; /* PIT i8254 */
/*The PIC is attached to the MIPS CPU INT0 pin */
static void pic_irq_request(void *opaque, int level)
{
CPUState *env = first_cpu;
if (level) {
env->CP0_Cause |= 0x00000400;
cpu_interrupt(env, CPU_INTERRUPT_HARD);
} else {
env->CP0_Cause &= ~0x00000400;
cpu_reset_interrupt(env, CPU_INTERRUPT_HARD);
}
cpu_mips_irq_request(opaque, 2, level);
}
static void mips_qemu_writel (void *opaque, target_phys_addr_t addr,
......
......@@ -57,8 +57,7 @@ void cpu_mips_store_count (CPUState *env, uint32_t value)
void cpu_mips_store_compare (CPUState *env, uint32_t value)
{
cpu_mips_update_count(env, cpu_mips_get_count(env), value);
env->CP0_Cause &= ~0x00008000;
cpu_reset_interrupt(env, CPU_INTERRUPT_HARD);
cpu_mips_irq_request(env, 7, 0);
}
static void mips_timer_cb (void *opaque)
......@@ -72,8 +71,7 @@ static void mips_timer_cb (void *opaque)
}
#endif
cpu_mips_update_count(env, cpu_mips_get_count(env), env->CP0_Compare);
env->CP0_Cause |= 0x00008000;
cpu_interrupt(env, CPU_INTERRUPT_HARD);
cpu_mips_irq_request(env, 7, 1);
}
void cpu_mips_clock_init (CPUState *env)
......
......@@ -158,6 +158,7 @@ struct CPUMIPSState {
#define CP0Ca_IV 23
#define CP0Ca_WP 22
#define CP0Ca_IP 8
#define CP0Ca_IP_mask 0x0000FF00
#define CP0Ca_EC 2
target_ulong CP0_EPC;
int32_t CP0_PRid;
......
......@@ -164,6 +164,7 @@ uint32_t cpu_mips_get_random (CPUState *env);
uint32_t cpu_mips_get_count (CPUState *env);
void cpu_mips_store_count (CPUState *env, uint32_t value);
void cpu_mips_store_compare (CPUState *env, uint32_t value);
void cpu_mips_update_irq(CPUState *env);
void cpu_mips_clock_init (CPUState *env);
void cpu_mips_tlb_flush (CPUState *env, int flush_global);
......
......@@ -1357,7 +1357,7 @@ void op_mtc0_compare (void)
void op_mtc0_status (void)
{
uint32_t val, old, mask;
uint32_t val, old;
val = (int32_t)T0 & 0xFA78FF01;
old = env->CP0_Status;
......@@ -1374,21 +1374,9 @@ void op_mtc0_status (void)
else
env->hflags &= ~MIPS_HFLAG_EXL;
env->CP0_Status = val;
/* If we unmasked an asserted IRQ, raise it */
mask = 0x0000FF00;
if (loglevel & CPU_LOG_TB_IN_ASM)
CALL_FROM_TB2(do_mtc0_status_debug, old, val);
if ((val & (1 << CP0St_IE)) && !(old & (1 << CP0St_IE)) &&
!(env->hflags & MIPS_HFLAG_EXL) &&
!(env->hflags & MIPS_HFLAG_ERL) &&
!(env->hflags & MIPS_HFLAG_DM) &&
(env->CP0_Status & env->CP0_Cause & mask)) {
env->interrupt_request |= CPU_INTERRUPT_HARD;
if (logfile)
CALL_FROM_TB0(do_mtc0_status_irqraise_debug);
} else if (!(val & (1 << CP0St_IE)) && (old & (1 << CP0St_IE))) {
env->interrupt_request &= ~CPU_INTERRUPT_HARD;
}
CALL_FROM_TB1(cpu_mips_update_irq, env);
RETURN();
}
......@@ -1415,22 +1403,13 @@ void op_mtc0_srsmap (void)
void op_mtc0_cause (void)
{
uint32_t val, old;
env->CP0_Cause = (env->CP0_Cause & 0xB000F87C) | (T0 & 0x00C00300);
val = (env->CP0_Cause & 0xB000F87C) | (T0 & 0x00C00300);
old = env->CP0_Cause;
env->CP0_Cause = val;
#if 0
{
int i, mask;
/* Check if we ever asserted a software IRQ */
for (i = 0; i < 2; i++) {
mask = 0x100 << i;
if ((val & mask) & !(old & mask))
CALL_FROM_TB1(mips_set_irq, i);
}
/* Handle the software interrupt as an hardware one, as they
are very similar */
if (T0 & CP0Ca_IP_mask) {
CALL_FROM_TB1(cpu_mips_update_irq, env);
}
#endif
RETURN();
}
......@@ -2074,36 +2053,17 @@ void op_pmon (void)
void op_di (void)
{
uint32_t val;
T0 = env->CP0_Status;
val = T0 & ~(1 << CP0St_IE);
if (val != T0) {
env->interrupt_request &= ~CPU_INTERRUPT_HARD;
env->CP0_Status = val;
}
env->CP0_Status = T0 & ~(1 << CP0St_IE);
CALL_FROM_TB1(cpu_mips_update_irq, env);
RETURN();
}
void op_ei (void)
{
uint32_t val;
T0 = env->CP0_Status;
val = T0 | (1 << CP0St_IE);
if (val != T0) {
const uint32_t mask = 0x0000FF00;
env->CP0_Status = val;
if (!(env->hflags & MIPS_HFLAG_EXL) &&
!(env->hflags & MIPS_HFLAG_ERL) &&
!(env->hflags & MIPS_HFLAG_DM) &&
(env->CP0_Status & env->CP0_Cause & mask)) {
env->interrupt_request |= CPU_INTERRUPT_HARD;
if (logfile)
CALL_FROM_TB0(do_mtc0_status_irqraise_debug);
}
}
env->CP0_Status = T0 | (1 << CP0St_IE);
CALL_FROM_TB1(cpu_mips_update_irq, env);
RETURN();
}
......
......@@ -265,6 +265,11 @@ void cpu_mips_store_compare(CPUState *env, uint32_t value)
cpu_abort(env, "mtc0 compare\n");
}
void cpu_mips_update_irq(CPUState *env)
{
cpu_abort(env, "mtc0 status / mtc0 cause\n");
}
void do_mtc0_status_debug(uint32_t old, uint32_t val)
{
cpu_abort(env, "mtc0 status debug\n");
......
......@@ -1067,6 +1067,9 @@ extern QEMUMachine mips_machine;
/* mips_malta.c */
extern QEMUMachine mips_malta_machine;
/* mips_int */
extern void cpu_mips_irq_request(void *opaque, int irq, int level);
/* mips_timer.c */
extern void cpu_mips_clock_init(CPUState *);
extern void cpu_mips_irqctrl_init (void);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册