sh4: Fix PCI ISA IO memory subregion

Booting the r2d machine from flash fails because flash is not discovered.
Looking at the flattened memory tree, we see the following.

FlatView #1
 AS "memory", root: system
 AS "cpu-memory-0", root: system
 AS "sh_pci_host", root: bus master container
 Root memory region: system
  0000000000000000-000000000000ffff (prio 0, i/o): io
  0000000000010000-0000000000ffffff (prio 0, i/o): r2d.flash @0000000000010000

The overlapping memory region is sh_pci.isa, ie the ISA I/O region bridge.
This region is initially assigned to address 0xfe240000, but overwritten
with a write into the PCIIOBR register. This write is expected to adjust
the PCI memory window, but not to change the region's base adddress.

Peter Maydell provided the following detailed explanation.

"Section 22.3.7 and in particular figure 22.3 (of "SSH7751R user's manual:
hardware") are clear about how this is supposed to work: there is a window
at 0xfe240000 in the system register space for PCI I/O space. When the CPU
makes an access into that area, the PCI controller calculates the PCI
address to use by combining bits 0..17 of the system address with the
bits 31..18 value that the guest has put into the PCIIOBR. That is, writing
to the PCIIOBR changes which section of the IO address space is visible in
the 0xfe240000 window. Instead what QEMU's implementation does is move the
window to whatever value the guest writes to the PCIIOBR register -- so if
the guest writes 0 we put the window at 0 in system address space."

Fix the problem by calling memory_region_set_alias_offset() instead of
removing and re-adding the PCI ISA subregion on writes into PCIIOBR.
At the same time, in sh_pci_device_realize(), don't set iobr since
it is overwritten later anyway. Instead, pass the base address to
memory_region_add_subregion() directly.

Many thanks to Peter Maydell for the detailed problem analysis, and for
providing suggestions on how to fix the problem.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Message-id: 20200218201050.15273-1-linux@roeck-us.net
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

hw/sh4/sh_pci.c

@@ -67,12 +67,8 @@ static void sh_pci_reg_write (void *p, hwaddr addr, uint64_t val,
         pcic->mbr = val & 0xff000001;
         break;
     case 0x1c8:
-        if ((val & 0xfffc0000) != (pcic->iobr & 0xfffc0000)) {
-            memory_region_del_subregion(get_system_memory(), &pcic->isa);
-            pcic->iobr = val & 0xfffc0001;
-            memory_region_add_subregion(get_system_memory(),
-                                        pcic->iobr & 0xfffc0000, &pcic->isa);
-        }
+        pcic->iobr = val & 0xfffc0001;
+        memory_region_set_alias_offset(&pcic->isa, val & 0xfffc0000);
         break;
     case 0x220:
         pci_data_write(phb->bus, pcic->par, val, 4);
@@ -147,8 +143,7 @@ static void sh_pci_device_realize(DeviceState *dev, Error **errp)
                              get_system_io(), 0, 0x40000);
     sysbus_init_mmio(sbd, &s->memconfig_p4);
     sysbus_init_mmio(sbd, &s->memconfig_a7);
-    s->iobr = 0xfe240000;
-    memory_region_add_subregion(get_system_memory(), s->iobr, &s->isa);
+    memory_region_add_subregion(get_system_memory(), 0xfe240000, &s->isa);
 
     s->dev = pci_create_simple(phb->bus, PCI_DEVFN(0, 0), "sh_pci_host");
 }