Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Block pull request

# gpg: Signature made Fri 14 Feb 2014 17:26:30 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  block: Open by reference will try device then node_name.
  block: Relax bdrv_lookup_bs constraints.
  blockdev: Fix wrong usage of QDECREF causing snapshoted quorum to crash on close.
  block: mirror - use local_err to avoid NULL errp
  qemu-iotests: Don't run 005 on vmdk split formats
  block: qemu-iotests - add vhdx log replay tests for qemu-img
  block: qemu-iotests - fix test 070 (vhdx)
  block: Don't throw away errno via error_setg
  block: Add notes to iSCSI's .bdrv_open and .bdrv_reopen_prepare
  blockdev: Remove 'type' parameter from blockdev_init()
  sdhci: Drop unnecessary #include
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

block.c

@@ -796,6 +796,13 @@ static int bdrv_assign_node_name(BlockDriverState *bs,
         return -EINVAL;
     }
 
+    /* takes care of avoiding namespaces collisions */
+    if (bdrv_find(node_name)) {
+        error_setg(errp, "node-name=%s is conflicting with a device id",
+                   node_name);
+        return -EINVAL;
+    }
+
     /* takes care of avoiding duplicates node names */
     if (bdrv_find_node(node_name)) {
         error_setg(errp, "Duplicate node name");
@@ -977,9 +984,8 @@ int bdrv_file_open(BlockDriverState **pbs, const char *filename,
         }
         QDECREF(options);
 
-        bs = bdrv_find(reference);
+        bs = bdrv_lookup_bs(reference, reference, errp);
         if (!bs) {
-            error_setg(errp, "Cannot find block device '%s'", reference);
             return -ENODEV;
         }
         bdrv_ref(bs);
@@ -3574,30 +3580,26 @@ BlockDriverState *bdrv_lookup_bs(const char *device,
 {
     BlockDriverState *bs = NULL;
 
-    if ((!device && !node_name) || (device && node_name)) {
-        error_setg(errp, "Use either device or node-name but not both");
-        return NULL;
-    }
-
     if (device) {
         bs = bdrv_find(device);
 
-        if (!bs) {
-            error_set(errp, QERR_DEVICE_NOT_FOUND, device);
-            return NULL;
+        if (bs) {
+            return bs;
         }
-
-        return bs;
     }
 
-    bs = bdrv_find_node(node_name);
+    if (node_name) {
+        bs = bdrv_find_node(node_name);
 
-    if (!bs) {
-        error_set(errp, QERR_DEVICE_NOT_FOUND, node_name);
-        return NULL;
+        if (bs) {
+            return bs;
+        }
     }
 
-    return bs;
+    error_setg(errp, "Cannot find device=%s nor node_name=%s",
+                     device ? device : "",
+                     node_name ? node_name : "");
+    return NULL;
 }
 
 BlockDriverState *bdrv_next(BlockDriverState *bs)

block/iscsi.c

@@ -1099,6 +1099,10 @@ fail:
 /*
  * We support iscsi url's on the form
  * iscsi://[<username>%<password>@]<host>[:<port>]/<targetname>/<lun>
+ *
+ * Note: flags are currently not used by iscsi_open.  If this function
+ * is changed such that flags are used, please examine iscsi_reopen_prepare()
+ * to see if needs to be changed as well.
  */
 static int iscsi_open(BlockDriverState *bs, QDict *options, int flags,
                       Error **errp)
@@ -1336,11 +1340,13 @@ static int iscsi_refresh_limits(BlockDriverState *bs)
     return 0;
 }
 
-/* We have nothing to do for iSCSI reopen, stub just returns
- * success */
+/* Since iscsi_open() ignores bdrv_flags, there is nothing to do here in
+ * prepare.  Note that this will not re-establish a connection with an iSCSI
+ * target - it is effectively a NOP.  */
 static int iscsi_reopen_prepare(BDRVReopenState *state,
                                 BlockReopenQueue *queue, Error **errp)
 {
+    /* NOP */
     return 0;
 }
 

block/mirror.c

@@ -633,6 +633,8 @@ void commit_active_start(BlockDriverState *bs, BlockDriverState *base,
 {
     int64_t length, base_length;
     int orig_base_flags;
+    int ret;
+    Error *local_err = NULL;
 
     orig_base_flags = bdrv_get_flags(base);
 
@@ -642,19 +644,23 @@ void commit_active_start(BlockDriverState *bs, BlockDriverState *base,
 
     length = bdrv_getlength(bs);
     if (length < 0) {
-        error_setg(errp, "Unable to determine length of %s", bs->filename);
+        error_setg_errno(errp, -length,
+                         "Unable to determine length of %s", bs->filename);
         goto error_restore_flags;
     }
 
     base_length = bdrv_getlength(base);
     if (base_length < 0) {
-        error_setg(errp, "Unable to determine length of %s", base->filename);
+        error_setg_errno(errp, -base_length,
+                         "Unable to determine length of %s", base->filename);
         goto error_restore_flags;
     }
 
     if (length > base_length) {
-        if (bdrv_truncate(base, length) < 0) {
-            error_setg(errp, "Top image %s is larger than base image %s, and "
+        ret = bdrv_truncate(base, length);
+        if (ret < 0) {
+            error_setg_errno(errp, -ret,
+                            "Top image %s is larger than base image %s, and "
                              "resize of base image failed",
                              bs->filename, base->filename);
             goto error_restore_flags;
@@ -663,9 +669,10 @@ void commit_active_start(BlockDriverState *bs, BlockDriverState *base,
 
     bdrv_ref(base);
     mirror_start_job(bs, base, speed, 0, 0,
-                     on_error, on_error, cb, opaque, errp,
+                     on_error, on_error, cb, opaque, &local_err,
                      &commit_active_job_driver, false, base);
-    if (error_is_set(errp)) {
+    if (error_is_set(&local_err)) {
+        error_propagate(errp, local_err);
         goto error_restore_flags;
     }
 

block/qcow2-snapshot.c

@@ -606,7 +606,8 @@ int qcow2_snapshot_delete(BlockDriverState *bs,
     s->nb_snapshots--;
     ret = qcow2_write_snapshots(bs);
     if (ret < 0) {
-        error_setg(errp, "Failed to remove snapshot from snapshot list");
+        error_setg_errno(errp, -ret,
+                         "Failed to remove snapshot from snapshot list");
         return ret;
     }
 
@@ -624,7 +625,7 @@ int qcow2_snapshot_delete(BlockDriverState *bs,
     ret = qcow2_update_snapshot_refcount(bs, sn.l1_table_offset,
                                          sn.l1_size, -1);
     if (ret < 0) {
-        error_setg(errp, "Failed to free the cluster and L1 table");
+        error_setg_errno(errp, -ret, "Failed to free the cluster and L1 table");
         return ret;
     }
     qcow2_free_clusters(bs, sn.l1_table_offset, sn.l1_size * sizeof(uint64_t),
@@ -633,7 +634,8 @@ int qcow2_snapshot_delete(BlockDriverState *bs,
     /* must update the copied flag on the current cluster offsets */
     ret = qcow2_update_snapshot_refcount(bs, s->l1_table_offset, s->l1_size, 0);
     if (ret < 0) {
-        error_setg(errp, "Failed to update snapshot status in disk");
+        error_setg_errno(errp, -ret,
+                         "Failed to update snapshot status in disk");
         return ret;
     }
 

block/vmdk.c

@@ -1502,7 +1502,7 @@ static int vmdk_create_extent(const char *filename, int64_t filesize,
     if (flat) {
         ret = bdrv_truncate(bs, filesize);
         if (ret < 0) {
-            error_setg(errp, "Could not truncate file");
+            error_setg_errno(errp, -ret, "Could not truncate file");
         }
         goto exit;
     }
@@ -1562,7 +1562,7 @@ static int vmdk_create_extent(const char *filename, int64_t filesize,
 
     ret = bdrv_truncate(bs, le64_to_cpu(header.grain_offset) << 9);
     if (ret < 0) {
-        error_setg(errp, "Could not truncate file");
+        error_setg_errno(errp, -ret, "Could not truncate file");
         goto exit;
     }
 
@@ -1846,7 +1846,7 @@ static int vmdk_create(const char *filename, QEMUOptionParameter *options,
     if (desc_offset == 0) {
         ret = bdrv_truncate(new_bs, desc_len);
         if (ret < 0) {
-            error_setg(errp, "Could not truncate file");
+            error_setg_errno(errp, -ret, "Could not truncate file");
         }
     }
 exit:

blockdev.c

@@ -308,7 +308,6 @@ typedef enum { MEDIA_DISK, MEDIA_CDROM } DriveMediaType;
 
 /* Takes the ownership of bs_opts */
 static DriveInfo *blockdev_init(const char *file, QDict *bs_opts,
-                                BlockInterfaceType type,
                                 Error **errp)
 {
     const char *buf;
@@ -437,11 +436,6 @@ static DriveInfo *blockdev_init(const char *file, QDict *bs_opts,
 
     on_write_error = BLOCKDEV_ON_ERROR_ENOSPC;
     if ((buf = qemu_opt_get(opts, "werror")) != NULL) {
-        if (type != IF_IDE && type != IF_SCSI && type != IF_VIRTIO && type != IF_NONE) {
-            error_setg(errp, "werror is not supported by this bus type");
-            goto early_err;
-        }
-
         on_write_error = parse_block_error_action(buf, 0, &error);
         if (error_is_set(&error)) {
             error_propagate(errp, error);
@@ -451,11 +445,6 @@ static DriveInfo *blockdev_init(const char *file, QDict *bs_opts,
 
     on_read_error = BLOCKDEV_ON_ERROR_REPORT;
     if ((buf = qemu_opt_get(opts, "rerror")) != NULL) {
-        if (type != IF_IDE && type != IF_VIRTIO && type != IF_SCSI && type != IF_NONE) {
-            error_report("rerror is not supported by this bus type");
-            goto early_err;
-        }
-
         on_read_error = parse_block_error_action(buf, 1, &error);
         if (error_is_set(&error)) {
             error_propagate(errp, error);
@@ -463,13 +452,18 @@ static DriveInfo *blockdev_init(const char *file, QDict *bs_opts,
         }
     }
 
+    if (bdrv_find_node(qemu_opts_id(opts))) {
+        error_setg(errp, "device id=%s is conflicting with a node-name",
+                   qemu_opts_id(opts));
+        goto early_err;
+    }
+
     /* init */
     dinfo = g_malloc0(sizeof(*dinfo));
     dinfo->id = g_strdup(qemu_opts_id(opts));
     dinfo->bdrv = bdrv_new(dinfo->id);
     dinfo->bdrv->open_flags = snapshot ? BDRV_O_SNAPSHOT : 0;
     dinfo->bdrv->read_only = ro;
-    dinfo->type = type;
     dinfo->refcount = 1;
     if (serial != NULL) {
         dinfo->serial = g_strdup(serial);
@@ -608,6 +602,14 @@ QemuOptsList qemu_legacy_drive_opts = {
             .name = "read-only",
             .type = QEMU_OPT_BOOL,
             .help = "open drive file as read-only",
+        },{
+            .name = "rerror",
+            .type = QEMU_OPT_STRING,
+            .help = "read error action",
+        },{
+            .name = "werror",
+            .type = QEMU_OPT_STRING,
+            .help = "write error action",
         },{
             .name = "copy-on-read",
             .type = QEMU_OPT_BOOL,
@@ -629,6 +631,7 @@ DriveInfo *drive_init(QemuOpts *all_opts, BlockInterfaceType block_default_type)
     int cyls, heads, secs, translation;
     int max_devs, bus_id, unit_id, index;
     const char *devaddr;
+    const char *werror, *rerror;
     bool read_only = false;
     bool copy_on_read;
     const char *filename;
@@ -872,8 +875,29 @@ DriveInfo *drive_init(QemuOpts *all_opts, BlockInterfaceType block_default_type)
 
     filename = qemu_opt_get(legacy_opts, "file");
 
+    /* Check werror/rerror compatibility with if=... */
+    werror = qemu_opt_get(legacy_opts, "werror");
+    if (werror != NULL) {
+        if (type != IF_IDE && type != IF_SCSI && type != IF_VIRTIO &&
+            type != IF_NONE) {
+            error_report("werror is not supported by this bus type");
+            goto fail;
+        }
+        qdict_put(bs_opts, "werror", qstring_from_str(werror));
+    }
+
+    rerror = qemu_opt_get(legacy_opts, "rerror");
+    if (rerror != NULL) {
+        if (type != IF_IDE && type != IF_VIRTIO && type != IF_SCSI &&
+            type != IF_NONE) {
+            error_report("rerror is not supported by this bus type");
+            goto fail;
+        }
+        qdict_put(bs_opts, "rerror", qstring_from_str(rerror));
+    }
+
     /* Actual block device init: Functionality shared with blockdev-add */
-    dinfo = blockdev_init(filename, bs_opts, type, &local_err);
+    dinfo = blockdev_init(filename, bs_opts, &local_err);
     if (dinfo == NULL) {
         if (error_is_set(&local_err)) {
             qerror_report_err(local_err);
@@ -893,6 +917,7 @@ DriveInfo *drive_init(QemuOpts *all_opts, BlockInterfaceType block_default_type)
     dinfo->secs = secs;
     dinfo->trans = translation;
 
+    dinfo->type = type;
     dinfo->bus = bus_id;
     dinfo->unit = unit_id;
     dinfo->devaddr = devaddr;
@@ -1310,8 +1335,6 @@ static void external_snapshot_prepare(BlkTransactionState *common,
     if (ret != 0) {
         error_propagate(errp, local_err);
     }
-
-    QDECREF(options);
 }
 
 static void external_snapshot_commit(BlkTransactionState *common)
@@ -2276,7 +2299,7 @@ void qmp_blockdev_add(BlockdevOptions *options, Error **errp)
 
     qdict_flatten(qdict);
 
-    blockdev_init(NULL, qdict, IF_NONE, &local_err);
+    blockdev_init(NULL, qdict, &local_err);
     if (error_is_set(&local_err)) {
         error_propagate(errp, local_err);
         goto fail;

hw/sd/sdhci.c

@@ -26,7 +26,6 @@
 #include "sysemu/blockdev.h"
 #include "sysemu/dma.h"
 #include "qemu/timer.h"
-#include "block/block_int.h"
 #include "qemu/bitops.h"
 
 #include "sdhci.h"

tests/qemu-iotests/005

@@ -44,6 +44,8 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
 _supported_fmt generic
 _supported_proto generic
 _supported_os Linux
+_unsupported_imgopts "subformat=twoGbMaxExtentFlat" \
+                     "subformat=twoGbMaxExtentSparse"
 
 # vpc is limited to 127GB, so we can't test it here
 if [ "$IMGFMT" = "vpc" ]; then

tests/qemu-iotests/070

@@ -56,11 +56,22 @@ _use_sample_img iotest-dirtylog-10G-4M.vhdx.bz2
 
 echo
 echo "=== Verify open image read-only fails, due to dirty log ==="
-$QEMU_IO -r -c "read -pP 0xa5 0 18M" "$TEST_IMG" 2>&1 | grep -o "Permission denied"
+$QEMU_IO -r -c "read -pP 0xa5 0 18M" "$TEST_IMG" 2>&1 | _filter_testdir \
+                                                      | _filter_qemu_io
 
 echo "=== Verify open image replays log  ==="
 $QEMU_IO  -c "read -pP 0xa5 0 18M" "$TEST_IMG" | _filter_qemu_io
 
+# extract fresh sample image again
+_use_sample_img iotest-dirtylog-10G-4M.vhdx.bz2
+
+echo "=== Verify qemu-img check -r all replays log  ==="
+$QEMU_IMG check -r all "$TEST_IMG" 2>&1 | _filter_testdir | _filter_qemu
+
+echo "=== Verify open image read-only succeeds after log replay ==="
+$QEMU_IO -r -c "read -pP 0xa5 0 18M" "$TEST_IMG" 2>&1 | _filter_testdir \
+                                                      | _filter_qemu_io
+
 # success, all done
 echo "*** done"
 rm -f $seq.full

tests/qemu-iotests/070.out

 QA output created by 070
 
 === Verify open image read-only fails, due to dirty log ===
-Permission denied
+qemu-io: can't open device TEST_DIR/iotest-dirtylog-10G-4M.vhdx: VHDX image file 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx' opened read-only, but contains a log that needs to be replayed.  To replay the log, execute:
+ qemu-img check -r all 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx': Operation not permitted
+ no file open, try 'help open'
 === Verify open image replays log  ===
 read 18874368/18874368 bytes at offset 0
 18 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+=== Verify qemu-img check -r all replays log  ===
+The following inconsistencies were found and repaired:
+
+    0 leaked clusters
+    1 corruptions
+
+Double checking the fixed image now...
+No errors were found on the image.
+=== Verify open image read-only succeeds after log replay ===
+read 18874368/18874368 bytes at offset 0
+18 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 *** done