xhci PCIe endpoint migration compatibility fix

Add back the PCIe config capabilities on XHCI cards in non-PCIe slots,
but only for machine types before 2.1.

This fixes a migration incompatibility in the XHCI PCI devices
caused by:
   058fdcf5 - xhci: add endpoint cap on express bus only

Note that in fixing it for compatibility with older QEMUs, it breaks
compatibility with existing QEMU 2.1's on older machine types.

The status before this patch was (if it used an XHCI adapter):
   machine type | source qemu
     any           pre-2.1     - FAIL
     any           2.1...      - PASS

With this patch:
   machine type | source qemu
     any           pre-2.1    - PASS
     pre-2.1       2.1...     - FAIL
     2.1           2.1...     - PASS

A test to trigger it is to add '-device nec-usb-xhci,id=xhci,addr=0x12'
to the command line.

Cc: qemu-stable@nongnu.org
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit e6043e92)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

hw/usb/hcd-xhci.c

@@ -499,6 +499,7 @@ enum xhci_flags {
     XHCI_FLAG_USE_MSI = 1,
     XHCI_FLAG_USE_MSI_X,
     XHCI_FLAG_SS_FIRST,
+    XHCI_FLAG_FORCE_PCIE_ENDCAP,
 };
 
 static void xhci_kick_ep(XHCIState *xhci, unsigned int slotid,
@@ -3626,7 +3627,8 @@ static int usb_xhci_initfn(struct PCIDevice *dev)
                      PCI_BASE_ADDRESS_SPACE_MEMORY|PCI_BASE_ADDRESS_MEM_TYPE_64,
                      &xhci->mem);
 
-    if (pci_bus_is_express(dev->bus)) {
+    if (pci_bus_is_express(dev->bus) ||
+        xhci_get_flag(xhci, XHCI_FLAG_FORCE_PCIE_ENDCAP)) {
         ret = pcie_endpoint_cap_init(dev, 0xa0);
         assert(ret >= 0);
     }
@@ -3818,6 +3820,8 @@ static Property xhci_properties[] = {
     DEFINE_PROP_BIT("msix",     XHCIState, flags, XHCI_FLAG_USE_MSI_X, true),
     DEFINE_PROP_BIT("superspeed-ports-first",
                     XHCIState, flags, XHCI_FLAG_SS_FIRST, true),
+    DEFINE_PROP_BIT("force-pcie-endcap", XHCIState, flags,
+                    XHCI_FLAG_FORCE_PCIE_ENDCAP, false),
     DEFINE_PROP_UINT32("intrs", XHCIState, numintrs, MAXINTRS),
     DEFINE_PROP_UINT32("slots", XHCIState, numslots, MAXSLOTS),
     DEFINE_PROP_UINT32("p2",    XHCIState, numports_2, 4),

include/hw/i386/pc.h

@@ -317,6 +317,11 @@ bool e820_get_entry(int, uint32_t, uint64_t *, uint64_t *);
             .property = "superspeed-ports-first",\
             .value    = "off",\
         },\
+        {\
+            .driver   = "nec-usb-xhci",\
+            .property = "force-pcie-endcap",\
+            .value    = "on",\
+        },\
         {\
             .driver   = "pci-serial",\
             .property = "prog_if",\