arm: a9mpcore: Coreify the SCU

Split the SCU in a9mpcore out into its own object definition. mpcore is now
just a container for the mpcore components.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

hw/a9mpcore.c

@@ -10,113 +10,17 @@
 
 #include "sysbus.h"
 
-/* A9MP private memory region.  */
-
 typedef struct A9MPPrivState {
     SysBusDevice busdev;
-    uint32_t scu_control;
-    uint32_t scu_status;
     uint32_t num_cpu;
-    MemoryRegion scu_iomem;
     MemoryRegion container;
     DeviceState *mptimer;
     DeviceState *wdt;
     DeviceState *gic;
+    DeviceState *scu;
     uint32_t num_irq;
 } A9MPPrivState;
 
-static uint64_t a9_scu_read(void *opaque, hwaddr offset,
-                            unsigned size)
-{
-    A9MPPrivState *s = (A9MPPrivState *)opaque;
-    switch (offset) {
-    case 0x00: /* Control */
-        return s->scu_control;
-    case 0x04: /* Configuration */
-        return (((1 << s->num_cpu) - 1) << 4) | (s->num_cpu - 1);
-    case 0x08: /* CPU Power Status */
-        return s->scu_status;
-    case 0x09: /* CPU status.  */
-        return s->scu_status >> 8;
-    case 0x0a: /* CPU status.  */
-        return s->scu_status >> 16;
-    case 0x0b: /* CPU status.  */
-        return s->scu_status >> 24;
-    case 0x0c: /* Invalidate All Registers In Secure State */
-        return 0;
-    case 0x40: /* Filtering Start Address Register */
-    case 0x44: /* Filtering End Address Register */
-        /* RAZ/WI, like an implementation with only one AXI master */
-        return 0;
-    case 0x50: /* SCU Access Control Register */
-    case 0x54: /* SCU Non-secure Access Control Register */
-        /* unimplemented, fall through */
-    default:
-        return 0;
-    }
-}
-
-static void a9_scu_write(void *opaque, hwaddr offset,
-                         uint64_t value, unsigned size)
-{
-    A9MPPrivState *s = (A9MPPrivState *)opaque;
-    uint32_t mask;
-    uint32_t shift;
-    switch (size) {
-    case 1:
-        mask = 0xff;
-        break;
-    case 2:
-        mask = 0xffff;
-        break;
-    case 4:
-        mask = 0xffffffff;
-        break;
-    default:
-        fprintf(stderr, "Invalid size %u in write to a9 scu register %x\n",
-                size, (unsigned)offset);
-        return;
-    }
-
-    switch (offset) {
-    case 0x00: /* Control */
-        s->scu_control = value & 1;
-        break;
-    case 0x4: /* Configuration: RO */
-        break;
-    case 0x08: case 0x09: case 0x0A: case 0x0B: /* Power Control */
-        shift = (offset - 0x8) * 8;
-        s->scu_status &= ~(mask << shift);
-        s->scu_status |= ((value & mask) << shift);
-        break;
-    case 0x0c: /* Invalidate All Registers In Secure State */
-        /* no-op as we do not implement caches */
-        break;
-    case 0x40: /* Filtering Start Address Register */
-    case 0x44: /* Filtering End Address Register */
-        /* RAZ/WI, like an implementation with only one AXI master */
-        break;
-    case 0x50: /* SCU Access Control Register */
-    case 0x54: /* SCU Non-secure Access Control Register */
-        /* unimplemented, fall through */
-    default:
-        break;
-    }
-}
-
-static const MemoryRegionOps a9_scu_ops = {
-    .read = a9_scu_read,
-    .write = a9_scu_write,
-    .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-static void a9mp_priv_reset(DeviceState *dev)
-{
-    A9MPPrivState *s = FROM_SYSBUS(A9MPPrivState, SYS_BUS_DEVICE(dev));
-
-    s->scu_control = 0;
-}
-
 static void a9mp_priv_set_irq(void *opaque, int irq, int level)
 {
     A9MPPrivState *s = (A9MPPrivState *)opaque;
@@ -126,7 +30,7 @@ static void a9mp_priv_set_irq(void *opaque, int irq, int level)
 static int a9mp_priv_init(SysBusDevice *dev)
 {
     A9MPPrivState *s = FROM_SYSBUS(A9MPPrivState, dev);
-    SysBusDevice *timerbusdev, *wdtbusdev, *gicbusdev;
+    SysBusDevice *timerbusdev, *wdtbusdev, *gicbusdev, *scubusdev;
     int i;
 
     s->gic = qdev_create(NULL, "arm_gic");
@@ -141,6 +45,11 @@ static int a9mp_priv_init(SysBusDevice *dev)
     /* Pass through inbound GPIO lines to the GIC */
     qdev_init_gpio_in(&s->busdev.qdev, a9mp_priv_set_irq, s->num_irq - 32);
 
+    s->scu = qdev_create(NULL, "a9-scu");
+    qdev_prop_set_uint32(s->scu, "num-cpu", s->num_cpu);
+    qdev_init_nofail(s->scu);
+    scubusdev = SYS_BUS_DEVICE(s->scu);
+
     s->mptimer = qdev_create(NULL, "arm_mptimer");
     qdev_prop_set_uint32(s->mptimer, "num-cpu", s->num_cpu);
     qdev_init_nofail(s->mptimer);
@@ -163,8 +72,8 @@ static int a9mp_priv_init(SysBusDevice *dev)
      * We should implement the global timer but don't currently do so.
      */
     memory_region_init(&s->container, "a9mp-priv-container", 0x2000);
-    memory_region_init_io(&s->scu_iomem, &a9_scu_ops, s, "a9mp-scu", 0x100);
-    memory_region_add_subregion(&s->container, 0, &s->scu_iomem);
+    memory_region_add_subregion(&s->container, 0,
+                                sysbus_mmio_get_region(scubusdev, 0));
     /* GIC CPU interface */
     memory_region_add_subregion(&s->container, 0x100,
                                 sysbus_mmio_get_region(gicbusdev, 1));
@@ -193,17 +102,6 @@ static int a9mp_priv_init(SysBusDevice *dev)
     return 0;
 }
 
-static const VMStateDescription vmstate_a9mp_priv = {
-    .name = "a9mpcore_priv",
-    .version_id = 3,
-    .minimum_version_id = 3,
-    .fields = (VMStateField[]) {
-        VMSTATE_UINT32(scu_control, A9MPPrivState),
-        VMSTATE_UINT32_V(scu_status, A9MPPrivState, 2),
-        VMSTATE_END_OF_LIST()
-    }
-};
-
 static Property a9mp_priv_properties[] = {
     DEFINE_PROP_UINT32("num-cpu", A9MPPrivState, num_cpu, 1),
     /* The Cortex-A9MP may have anything from 0 to 224 external interrupt
@@ -223,8 +121,6 @@ static void a9mp_priv_class_init(ObjectClass *klass, void *data)
 
     k->init = a9mp_priv_init;
     dc->props = a9mp_priv_properties;
-    dc->vmsd = &vmstate_a9mp_priv;
-    dc->reset = a9mp_priv_reset;
 }
 
 static const TypeInfo a9mp_priv_info = {

hw/a9scu.c

+/*
+ * Cortex-A9MPCore Snoop Control Unit (SCU) emulation.
+ *
+ * Copyright (c) 2009 CodeSourcery.
+ * Copyright (c) 2011 Linaro Limited.
+ * Written by Paul Brook, Peter Maydell.
+ *
+ * This code is licensed under the GPL.
+ */
+
+#include "sysbus.h"
+
+/* A9MP private memory region.  */
+
+typedef struct A9SCUState {
+    SysBusDevice busdev;
+    MemoryRegion iomem;
+    uint32_t control;
+    uint32_t status;
+    uint32_t num_cpu;
+} A9SCUState;
+
+#define TYPE_A9_SCU "a9-scu"
+#define A9_SCU(obj) OBJECT_CHECK(A9SCUState, (obj), TYPE_A9_SCU)
+
+static uint64_t a9_scu_read(void *opaque, hwaddr offset,
+                            unsigned size)
+{
+    A9SCUState *s = (A9SCUState *)opaque;
+    switch (offset) {
+    case 0x00: /* Control */
+        return s->control;
+    case 0x04: /* Configuration */
+        return (((1 << s->num_cpu) - 1) << 4) | (s->num_cpu - 1);
+    case 0x08: /* CPU Power Status */
+        return s->status;
+    case 0x09: /* CPU status.  */
+        return s->status >> 8;
+    case 0x0a: /* CPU status.  */
+        return s->status >> 16;
+    case 0x0b: /* CPU status.  */
+        return s->status >> 24;
+    case 0x0c: /* Invalidate All Registers In Secure State */
+        return 0;
+    case 0x40: /* Filtering Start Address Register */
+    case 0x44: /* Filtering End Address Register */
+        /* RAZ/WI, like an implementation with only one AXI master */
+        return 0;
+    case 0x50: /* SCU Access Control Register */
+    case 0x54: /* SCU Non-secure Access Control Register */
+        /* unimplemented, fall through */
+    default:
+        return 0;
+    }
+}
+
+static void a9_scu_write(void *opaque, hwaddr offset,
+                         uint64_t value, unsigned size)
+{
+    A9SCUState *s = (A9SCUState *)opaque;
+    uint32_t mask;
+    uint32_t shift;
+    switch (size) {
+    case 1:
+        mask = 0xff;
+        break;
+    case 2:
+        mask = 0xffff;
+        break;
+    case 4:
+        mask = 0xffffffff;
+        break;
+    default:
+        fprintf(stderr, "Invalid size %u in write to a9 scu register %x\n",
+                size, (unsigned)offset);
+        return;
+    }
+
+    switch (offset) {
+    case 0x00: /* Control */
+        s->control = value & 1;
+        break;
+    case 0x4: /* Configuration: RO */
+        break;
+    case 0x08: case 0x09: case 0x0A: case 0x0B: /* Power Control */
+        shift = (offset - 0x8) * 8;
+        s->status &= ~(mask << shift);
+        s->status |= ((value & mask) << shift);
+        break;
+    case 0x0c: /* Invalidate All Registers In Secure State */
+        /* no-op as we do not implement caches */
+        break;
+    case 0x40: /* Filtering Start Address Register */
+    case 0x44: /* Filtering End Address Register */
+        /* RAZ/WI, like an implementation with only one AXI master */
+        break;
+    case 0x50: /* SCU Access Control Register */
+    case 0x54: /* SCU Non-secure Access Control Register */
+        /* unimplemented, fall through */
+    default:
+        break;
+    }
+}
+
+static const MemoryRegionOps a9_scu_ops = {
+    .read = a9_scu_read,
+    .write = a9_scu_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void a9_scu_reset(DeviceState *dev)
+{
+    A9SCUState *s = A9_SCU(dev);
+    s->control = 0;
+}
+
+static void a9_scu_realize(DeviceState *dev, Error ** errp)
+{
+    A9SCUState *s = A9_SCU(dev);
+    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+
+    memory_region_init_io(&s->iomem, &a9_scu_ops, s, "a9-scu", 0x100);
+    sysbus_init_mmio(sbd, &s->iomem);
+}
+
+static const VMStateDescription vmstate_a9_scu = {
+    .name = "a9-scu",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(control, A9SCUState),
+        VMSTATE_UINT32(status, A9SCUState),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static Property a9_scu_properties[] = {
+    DEFINE_PROP_UINT32("num-cpu", A9SCUState, num_cpu, 1),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void a9_scu_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->realize = a9_scu_realize;
+    dc->props = a9_scu_properties;
+    dc->vmsd = &vmstate_a9_scu;
+    dc->reset = a9_scu_reset;
+}
+
+static const TypeInfo a9_scu_info = {
+    .name          = TYPE_A9_SCU,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(A9SCUState),
+    .class_init    = a9_scu_class_init,
+};
+
+static void a9mp_register_types(void)
+{
+    type_register_static(&a9_scu_info);
+}
+
+type_init(a9mp_register_types)

hw/arm/Makefile.objs

@@ -3,6 +3,7 @@ obj-y += arm_boot.o
 obj-y += xilinx_zynq.o zynq_slcr.o
 obj-y += xilinx_spips.o
 obj-y += arm_gic.o arm_gic_common.o
+obj-y += a9scu.o
 obj-y += realview_gic.o realview.o arm_sysctl.o arm11mpcore.o a9mpcore.o
 obj-y += exynos4210_gic.o exynos4210_combiner.o exynos4210.o
 obj-y += exynos4_boards.o exynos4210_uart.o exynos4210_pwm.o