spapr_vscsi: Fix REPORT_LUNS handling

Intercept REPORT_LUNS commands addressed either to SRP LUN 0 or the well-known
LUN for REPORT_LUNS commands. This is required to implement the SAM and SPC
specifications.

Since SRP implements only a single SCSI target port per connection, the SRP
target is required to report all available LUNs in response to a REPORT_LUNS
command addressed either to LUN 0 or the well-known LUN. Instead, QEMU was
forwarding such requests to the first QEMU SCSI target, with the result that
initiators that relied on this feature would only see LUNs on the first QEMU
SCSI target.

Behavior for REPORT_LUNS commands addressed to any other LUN is not specified
by the standard and so is left unchanged. This preserves behavior under Linux
and SLOF, which enumerate possible LUNs by hand and so address no commands
either to LUN 0 or the well-known REPORT_LUNS LUN.
Signed-off-by: NNathan Whitehorn <nwhitehorn@freebsd.org>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
[agraf: define constant as ULL for 32bit hosts]
Signed-off-by: NAlexander Graf <agraf@suse.de>

hw/scsi/spapr_vscsi.c

@@ -62,6 +62,8 @@
 
 #define SRP_RSP_SENSE_DATA_LEN  18
 
+#define SRP_REPORT_LUNS_WLUN    0xc10100000000000ULL
+
 typedef union vscsi_crq {
     struct viosrp_crq s;
     uint8_t raw[16];
@@ -719,12 +721,70 @@ static void vscsi_inquiry_no_target(VSCSIState *s, vscsi_req *req)
     }
 }
 
+static void vscsi_report_luns(VSCSIState *s, vscsi_req *req)
+{
+    BusChild *kid;
+    int i, len, n, rc;
+    uint8_t *resp_data;
+    bool found_lun0;
+
+    n = 0;
+    found_lun0 = false;
+    QTAILQ_FOREACH(kid, &s->bus.qbus.children, sibling) {
+        SCSIDevice *dev = SCSI_DEVICE(kid->child);
+
+        n += 8;
+        if (dev->channel == 0 && dev->id == 0 && dev->lun == 0) {
+            found_lun0 = true;
+        }
+    }
+    if (!found_lun0) {
+        n += 8;
+    }
+    len = n+8;
+
+    resp_data = g_malloc0(len);
+    memset(resp_data, 0, len);
+    stl_be_p(resp_data, n);
+    i = found_lun0 ? 8 : 16;
+    QTAILQ_FOREACH(kid, &s->bus.qbus.children, sibling) {
+        DeviceState *qdev = kid->child;
+        SCSIDevice *dev = SCSI_DEVICE(qdev);
+
+        if (dev->id == 0 && dev->channel == 0) {
+            resp_data[i] = 0;         /* Use simple LUN for 0 (SAM5 4.7.7.1) */
+        } else {
+            resp_data[i] = (2 << 6);  /* Otherwise LUN addressing (4.7.7.4)  */
+        }
+        resp_data[i] |= dev->id;
+        resp_data[i+1] = (dev->channel << 5);
+        resp_data[i+1] |= dev->lun;
+        i += 8;
+    }
+
+    vscsi_preprocess_desc(req);
+    rc = vscsi_srp_transfer_data(s, req, 0, resp_data, len);
+    g_free(resp_data);
+    if (rc < 0) {
+        vscsi_makeup_sense(s, req, HARDWARE_ERROR, 0, 0);
+        vscsi_send_rsp(s, req, CHECK_CONDITION, 0, 0);
+    } else {
+        vscsi_send_rsp(s, req, 0, len - rc, 0);
+    }
+}
+
 static int vscsi_queue_cmd(VSCSIState *s, vscsi_req *req)
 {
     union srp_iu *srp = &req->iu.srp;
     SCSIDevice *sdev;
     int n, lun;
 
+    if ((srp->cmd.lun == 0 || be64_to_cpu(srp->cmd.lun) == SRP_REPORT_LUNS_WLUN)
+      && srp->cmd.cdb[0] == REPORT_LUNS) {
+        vscsi_report_luns(s, req);
+        return 0;
+    }
+
     sdev = vscsi_device_find(&s->bus, be64_to_cpu(srp->cmd.lun), &lun);
     if (!sdev) {
         DPRINTF("VSCSI: Command for lun %08" PRIx64 " with no drive\n",