Merge remote-tracking branch 'kraxel/usb.79' into staging

# By Gerd Hoffmann (7) and Hans de Goede (3)
# Via Gerd Hoffmann
* kraxel/usb.79:
  usb-tablet: Don't claim wakeup capability for USB-2 version
  usb: update docs for bus name change
  usb-hub: report status changes only once
  usb-hub: limit chain length
  xhci: zap unused name field
  xhci: remove unimplemented printfs
  xhci: remove leftover debug printf
  xhci: fix numintrs sanity checks
  usb-redir: Add flow control support
  usb-redir: Fix crash on migration with no client connected

docs/usb2.txt

@@ -11,7 +11,7 @@ one USB 2.0 bus driven by the EHCI controller.  Devices must be
 attached to the correct controller manually.
 
 The '-usb' switch will make qemu create the UHCI controller as part of
-the PIIX3 chipset.  The USB 1.1 bus will carry the name "usb.0".
+the PIIX3 chipset.  The USB 1.1 bus will carry the name "usb-bus.0".
 
 You can use the standard -device switch to add a EHCI controller to
 your virtual machine.  It is strongly recommended to specify an ID for
@@ -27,7 +27,7 @@ a complete example:
         -drive if=none,id=usbstick,file=/path/to/image   \
         -usb                                             \
         -device usb-ehci,id=ehci                         \
-        -device usb-tablet,bus=usb.0                     \
+        -device usb-tablet,bus=usb-bus.0                 \
         -device usb-storage,bus=ehci.0,drive=usbstick
 
 This attaches a usb tablet to the UHCI adapter and a usb mass storage
@@ -88,22 +88,22 @@ ports (1-4), the emulated (1.1) USB hub has eight ports.
 
 Plugging a tablet into UHCI port 1 works like this:
 
-        -device usb-tablet,bus=usb.0,port=1
+        -device usb-tablet,bus=usb-bus.0,port=1
 
 Plugging a hub into UHCI port 2 works like this:
 
-        -device usb-hub,bus=usb.0,port=2
+        -device usb-hub,bus=usb-bus.0,port=2
 
 Plugging a virtual usb stick into port 4 of the hub just plugged works
 this way:
 
-        -device usb-storage,bus=usb.0,port=2.4,drive=...
+        -device usb-storage,bus=usb-bus.0,port=2.4,drive=...
 
 You can do basically the same in the monitor using the device_add
 command.  If you want to unplug devices too you should specify some
 unique id which you can use to refer to the device ...
 
-        (qemu) device_add usb-tablet,bus=usb.0,port=1,id=my-tablet
+        (qemu) device_add usb-tablet,bus=usb-bus.0,port=1,id=my-tablet
         (qemu) device_del my-tablet
 
 ... when unplugging it with device_del.
@@ -148,10 +148,10 @@ using for testing is bus 1 + port 1 for 2.0 devices and bus 3 + port 1
 for 1.1 devices.  Passing through any device plugged into that port
 and also assign them to the correct bus can be done this way:
 
-    qemu -M pc ${otheroptions}                           \
-        -usb                                             \
-        -device usb-ehci,id=ehci                         \
-        -device usb-host,bus=usb.0,hostbus=3,hostport=1  \
+    qemu -M pc ${otheroptions}                               \
+        -usb                                                 \
+        -device usb-ehci,id=ehci                             \
+        -device usb-host,bus=usb-bus.0,hostbus=3,hostport=1  \
         -device usb-host,bus=ehci.0,hostbus=1,hostport=1
 
 enjoy,

hw/usb.h

@@ -337,6 +337,7 @@ typedef struct USBPortOps {
 struct USBPort {
     USBDevice *dev;
     int speedmask;
+    int hubcount;
     char path[16];
     USBPortOps *ops;
     void *opaque;

hw/usb/bus.c

@@ -341,8 +341,10 @@ void usb_port_location(USBPort *downstream, USBPort *upstream, int portnr)
     if (upstream) {
         snprintf(downstream->path, sizeof(downstream->path), "%s.%d",
                  upstream->path, portnr);
+        downstream->hubcount = upstream->hubcount + 1;
     } else {
         snprintf(downstream->path, sizeof(downstream->path), "%d", portnr);
+        downstream->hubcount = 0;
     }
 }
 

hw/usb/dev-hid.c

@@ -236,7 +236,7 @@ static const USBDescDevice desc_device_tablet2 = {
             .bNumInterfaces        = 1,
             .bConfigurationValue   = 1,
             .iConfiguration        = STR_CONFIG_TABLET,
-            .bmAttributes          = 0xa0,
+            .bmAttributes          = 0x80,
             .bMaxPower             = 50,
             .nif = 1,
             .ifs = &desc_iface_tablet2,

hw/usb/dev-hub.c

@@ -25,6 +25,7 @@
 #include "trace.h"
 #include "hw/usb.h"
 #include "hw/usb/desc.h"
+#include "qemu/error-report.h"
 
 #define NUM_PORTS 8
 
@@ -32,6 +33,7 @@ typedef struct USBHubPort {
     USBPort port;
     uint16_t wPortStatus;
     uint16_t wPortChange;
+    uint16_t wPortChange_reported;
 } USBHubPort;
 
 typedef struct USBHubState {
@@ -466,8 +468,11 @@ static void usb_hub_handle_data(USBDevice *dev, USBPacket *p)
             status = 0;
             for(i = 0; i < NUM_PORTS; i++) {
                 port = &s->ports[i];
-                if (port->wPortChange)
+                if (port->wPortChange &&
+                    port->wPortChange_reported != port->wPortChange) {
                     status |= (1 << (i + 1));
+                }
+                port->wPortChange_reported = port->wPortChange;
             }
             if (status != 0) {
                 for(i = 0; i < n; i++) {
@@ -514,6 +519,11 @@ static int usb_hub_initfn(USBDevice *dev)
     USBHubPort *port;
     int i;
 
+    if (dev->port->hubcount == 5) {
+        error_report("usb hub chain too deep");
+        return -1;
+    }
+
     usb_desc_create_serial(dev);
     usb_desc_init(dev);
     s->intr = usb_ep_get(dev, USB_TOKEN_IN, 1);

hw/usb/hcd-xhci.c

@@ -452,7 +452,6 @@ struct XHCIState {
     MemoryRegion mem_oper;
     MemoryRegion mem_runtime;
     MemoryRegion mem_doorbell;
-    const char *name;
     unsigned int devaddr;
 
     /* properties */
@@ -1172,8 +1171,6 @@ static void xhci_set_ep_state(XHCIState *xhci, XHCIEPContext *epctx,
     uint32_t ctx[5];
     uint32_t ctx2[2];
 
-    fprintf(stderr, "%s: epid %d, state %d\n",
-            __func__, epctx->epid, state);
     xhci_dma_read_u32s(xhci, epctx->pctx, ctx, sizeof(ctx));
     ctx[0] &= ~EP_STATE_MASK;
     ctx[0] |= state;
@@ -2568,7 +2565,7 @@ static void xhci_process_commands(XHCIState *xhci)
         }
         break;
         default:
-            fprintf(stderr, "xhci: unimplemented command %d\n", type);
+            trace_usb_xhci_unimplemented("command", type);
             event.ccode = CC_TRB_ERROR;
             break;
         }
@@ -2767,7 +2764,7 @@ static uint64_t xhci_cap_read(void *ptr, hwaddr reg, unsigned size)
         ret = 0x00000000; /* reserved */
         break;
     default:
-        fprintf(stderr, "xhci_cap_read: reg %d unimplemented\n", (int)reg);
+        trace_usb_xhci_unimplemented("cap read", reg);
         ret = 0;
     }
 
@@ -2790,8 +2787,7 @@ static uint64_t xhci_port_read(void *ptr, hwaddr reg, unsigned size)
         break;
     case 0x0c: /* reserved */
     default:
-        fprintf(stderr, "xhci_port_read (port %d): reg 0x%x unimplemented\n",
-                port->portnr, (uint32_t)reg);
+        trace_usb_xhci_unimplemented("port read", reg);
         ret = 0;
     }
 
@@ -2831,8 +2827,7 @@ static void xhci_port_write(void *ptr, hwaddr reg,
     case 0x04: /* PORTPMSC */
     case 0x08: /* PORTLI */
     default:
-        fprintf(stderr, "xhci_port_write (port %d): reg 0x%x unimplemented\n",
-                port->portnr, (uint32_t)reg);
+        trace_usb_xhci_unimplemented("port write", reg);
     }
 }
 
@@ -2870,7 +2865,7 @@ static uint64_t xhci_oper_read(void *ptr, hwaddr reg, unsigned size)
         ret = xhci->config;
         break;
     default:
-        fprintf(stderr, "xhci_oper_read: reg 0x%x unimplemented\n", (int)reg);
+        trace_usb_xhci_unimplemented("oper read", reg);
         ret = 0;
     }
 
@@ -2935,7 +2930,7 @@ static void xhci_oper_write(void *ptr, hwaddr reg,
         xhci->config = val & 0xff;
         break;
     default:
-        fprintf(stderr, "xhci_oper_write: reg 0x%x unimplemented\n", (int)reg);
+        trace_usb_xhci_unimplemented("oper write", reg);
     }
 }
 
@@ -2951,8 +2946,7 @@ static uint64_t xhci_runtime_read(void *ptr, hwaddr reg,
             ret = xhci_mfindex_get(xhci) & 0x3fff;
             break;
         default:
-            fprintf(stderr, "xhci_runtime_read: reg 0x%x unimplemented\n",
-                    (int)reg);
+            trace_usb_xhci_unimplemented("runtime read", reg);
             break;
         }
     } else {
@@ -2996,7 +2990,7 @@ static void xhci_runtime_write(void *ptr, hwaddr reg,
     trace_usb_xhci_runtime_write(reg, val);
 
     if (reg < 0x20) {
-        fprintf(stderr, "%s: reg 0x%x unimplemented\n", __func__, (int)reg);
+        trace_usb_xhci_unimplemented("runtime write", reg);
         return;
     }
 
@@ -3038,8 +3032,7 @@ static void xhci_runtime_write(void *ptr, hwaddr reg,
         xhci_events_update(xhci, v);
         break;
     default:
-        fprintf(stderr, "xhci_oper_write: reg 0x%x unimplemented\n",
-                (int)reg);
+        trace_usb_xhci_unimplemented("oper write", reg);
     }
 }
 
@@ -3290,6 +3283,9 @@ static int usb_xhci_initfn(struct PCIDevice *dev)
     if (xhci->numintrs > MAXINTRS) {
         xhci->numintrs = MAXINTRS;
     }
+    while (xhci->numintrs & (xhci->numintrs - 1)) {   /* ! power of 2 */
+        xhci->numintrs++;
+    }
     if (xhci->numintrs < 1) {
         xhci->numintrs = 1;
     }

hw/usb/redirect.c

@@ -104,6 +104,8 @@ struct USBRedirDevice {
     /* Data passed from chardev the fd_read cb to the usbredirparser read cb */
     const uint8_t *read_buf;
     int read_buf_size;
+    /* Active chardev-watch-tag */
+    guint watch;
     /* For async handling of close */
     QEMUBH *chardev_close_bh;
     /* To delay the usb attach in case of quick chardev close + open */
@@ -254,9 +256,21 @@ static int usbredir_read(void *priv, uint8_t *data, int count)
     return count;
 }
 
+static gboolean usbredir_write_unblocked(GIOChannel *chan, GIOCondition cond,
+                                         void *opaque)
+{
+    USBRedirDevice *dev = opaque;
+
+    dev->watch = 0;
+    usbredirparser_do_write(dev->parser);
+
+    return FALSE;
+}
+
 static int usbredir_write(void *priv, uint8_t *data, int count)
 {
     USBRedirDevice *dev = priv;
+    int r;
 
     if (!dev->cs->be_open) {
         return 0;
@@ -267,7 +281,17 @@ static int usbredir_write(void *priv, uint8_t *data, int count)
         return 0;
     }
 
-    return qemu_chr_fe_write(dev->cs, data, count);
+    r = qemu_chr_fe_write(dev->cs, data, count);
+    if (r < count) {
+        if (!dev->watch) {
+            dev->watch = qemu_chr_fe_add_watch(dev->cs, G_IO_OUT,
+                                               usbredir_write_unblocked, dev);
+        }
+        if (r < 0) {
+            r = 0;
+        }
+    }
+    return r;
 }
 
 /*
@@ -1085,6 +1109,10 @@ static void usbredir_chardev_close_bh(void *opaque)
         usbredirparser_destroy(dev->parser);
         dev->parser = NULL;
     }
+    if (dev->watch) {
+        g_source_remove(dev->watch);
+        dev->watch = 0;
+    }
 }
 
 static void usbredir_create_parser(USBRedirDevice *dev)
@@ -1317,6 +1345,9 @@ static void usbredir_handle_destroy(USBDevice *udev)
     if (dev->parser) {
         usbredirparser_destroy(dev->parser);
     }
+    if (dev->watch) {
+        g_source_remove(dev->watch);
+    }
 
     free(dev->filter_rules);
 }
@@ -1973,6 +2004,10 @@ static int usbredir_post_load(void *priv, int version_id)
 {
     USBRedirDevice *dev = priv;
 
+    if (dev->parser == NULL) {
+        return 0;
+    }
+
     switch (dev->device_info.speed) {
     case usb_redir_speed_low:
         dev->dev.speed = USB_SPEED_LOW;

trace-events

@@ -380,6 +380,7 @@ usb_xhci_xfer_nak(void *xfer) "%p"
 usb_xhci_xfer_retry(void *xfer) "%p"
 usb_xhci_xfer_success(void *xfer, uint32_t bytes) "%p: len %d"
 usb_xhci_xfer_error(void *xfer, uint32_t ret) "%p: ret %d"
+usb_xhci_unimplemented(const char *item, int nr) "%s (0x%x)"
 
 # hw/usb/desc.c
 usb_desc_device(int addr, int len, int ret) "dev %d query device, len %d, ret %d"