Skip to content

Q
qemu

openeuler / qemu

通知 10
Star 0
Fork 0
Q
qemu
提交 29885477 编写于 作者: B balrog
浏览文件
操作

Make omap I2C controller work (previously untested). Implement post-OMAP1... 

Make omap I2C controller work (previously untested).  Implement post-OMAP1 changes.  Introduce omap L4 abstraction.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3977 c046a42c-6fe2-441c-8c8c-71466251a162
上级 4d3b6f6e
隐藏空白更改
内联 并排
Showing with 116 addition and 15 deletion
hw/omap.h
浏览文件 @ 29885477
......@@ -60,6 +60,10 @@ struct omap_intr_handler_s *omap_inth_init(target_phys_addr_t base,
unsigned long size, unsigned char nbanks,
qemu_irq parent_irq, qemu_irq parent_fiq, omap_clk clk);
struct omap_target_agent_s;
static inline target_phys_addr_t omap_l4_attach(struct omap_target_agent_s *ta,
int region, int iotype) { return 0; }
/*
* Common IRQ numbers for level 1 interrupt handler
* See /usr/include/asm-arm/arch-omap/irqs.h in Linux.
......@@ -573,6 +577,8 @@ void omap_mmc_handlers(struct omap_mmc_s *s, qemu_irq ro, qemu_irq cover);
struct omap_i2c_s;
struct omap_i2c_s *omap_i2c_init(target_phys_addr_t base,
qemu_irq irq, qemu_irq *dma, omap_clk clk);
struct omap_i2c_s *omap2_i2c_init(struct omap_target_agent_s *ta,
qemu_irq irq, qemu_irq *dma, omap_clk fclk, omap_clk iclk);
void omap_i2c_reset(struct omap_i2c_s *s);
i2c_bus *omap_i2c_bus(struct omap_i2c_s *s);
......
hw/omap_i2c.c
浏览文件 @ 29885477
......@@ -29,6 +29,7 @@ struct omap_i2c_s {
i2c_slave slave;
i2c_bus *bus;
uint8_t revision;
uint8_t mask;
uint16_t stat;
uint16_t dma;
......@@ -44,6 +45,9 @@ struct omap_i2c_s {
uint16_t test;
};
#define OMAP2_INTR_REV 0x34
#define OMAP2_GC_REV 0x34
static void omap_i2c_interrupts_update(struct omap_i2c_s *s)
{
qemu_set_irq(s->irq, s->stat & s->mask);
......@@ -124,6 +128,7 @@ static void omap_i2c_fifo_run(struct omap_i2c_s *s)
i2c_end_transfer(s->bus);
s->control &= ~(1 << 1); /* STP */
s->count_cur = s->count;
s->txlen = 0;
} else if ((s->control >> 9) & 1) { /* TRX */
while (ack && s->txlen)
ack = (i2c_send(s->bus,
......@@ -162,6 +167,7 @@ static void omap_i2c_fifo_run(struct omap_i2c_s *s)
i2c_end_transfer(s->bus);
s->control &= ~(1 << 1); /* STP */
s->count_cur = s->count;
s->txlen = 0;
} else {
s->stat |= 1 << 2; /* ARDY */
s->control &= ~(1 << 10); /* MST */
......@@ -201,8 +207,7 @@ static uint32_t omap_i2c_read(void *opaque, target_phys_addr_t addr)
switch (offset) {
case 0x00: /* I2C_REV */
/* TODO: set a value greater or equal to real hardware */
return 0x11; /* REV */
return s->revision; /* REV */
case 0x04: /* I2C_IE */
return s->mask;
......@@ -211,12 +216,17 @@ static uint32_t omap_i2c_read(void *opaque, target_phys_addr_t addr)
return s->stat | (i2c_bus_busy(s->bus) << 12);
case 0x0c: /* I2C_IV */
if (s->revision >= OMAP2_INTR_REV)
break;
ret = ffs(s->stat & s->mask);
if (ret)
s->stat ^= 1 << (ret - 1);
omap_i2c_interrupts_update(s);
return ret;
case 0x10: /* I2C_SYSS */
return (s->control >> 15) & 1; /* I2C_EN */
case 0x14: /* I2C_BUF */
return s->dma;
......@@ -242,7 +252,7 @@ static uint32_t omap_i2c_read(void *opaque, target_phys_addr_t addr)
} else
/* XXX: remote access (qualifier) error - what's that? */;
if (!s->rxlen) {
s->stat |= ~(1 << 3); /* RRDY */
s->stat &= ~(1 << 3); /* RRDY */
if (((s->control >> 10) & 1) && /* MST */
((~s->control >> 9) & 1)) { /* TRX */
s->stat |= 1 << 2; /* ARDY */
......@@ -254,6 +264,9 @@ static uint32_t omap_i2c_read(void *opaque, target_phys_addr_t addr)
omap_i2c_interrupts_update(s);
return ret;
case 0x20: /* I2C_SYSC */
return 0;
case 0x24: /* I2C_CON */
return s->control;
......@@ -293,13 +306,23 @@ static void omap_i2c_write(void *opaque, target_phys_addr_t addr,
switch (offset) {
case 0x00: /* I2C_REV */
case 0x08: /* I2C_STAT */
case 0x0c: /* I2C_IV */
OMAP_BAD_REG(addr);
case 0x10: /* I2C_SYSS */
OMAP_RO_REG(addr);
return;
case 0x04: /* I2C_IE */
s->mask = value & 0x1f;
s->mask = value & (s->revision < OMAP2_GC_REV ? 0x1f : 0x3f);
break;
case 0x08: /* I2C_STAT */
if (s->revision < OMAP2_INTR_REV) {
OMAP_RO_REG(addr);
return;
}
s->stat &= ~(value & 0x3f);
omap_i2c_interrupts_update(s);
break;
case 0x14: /* I2C_BUF */
......@@ -335,29 +358,42 @@ static void omap_i2c_write(void *opaque, target_phys_addr_t addr,
omap_i2c_interrupts_update(s);
break;
case 0x20: /* I2C_SYSC */
if (s->revision < OMAP2_INTR_REV) {
OMAP_BAD_REG(addr);
return;
}
if (value & 2)
omap_i2c_reset(s);
break;
case 0x24: /* I2C_CON */
s->control = value & 0xcf07;
s->control = value & 0xcf87;
if (~value & (1 << 15)) { /* I2C_EN */
omap_i2c_reset(s);
if (s->revision < OMAP2_INTR_REV)
omap_i2c_reset(s);
break;
}
if (~value & (1 << 10)) { /* MST */
if ((value & (1 << 15)) && !(value & (1 << 10))) { /* MST */
printf("%s: I^2C slave mode not supported\n", __FUNCTION__);
break;
}
if (value & (1 << 9)) { /* XA */
if ((value & (1 << 15)) && value & (1 << 8)) { /* XA */
printf("%s: 10-bit addressing mode not supported\n", __FUNCTION__);
break;
}
if (value & (1 << 0)) { /* STT */
if ((value & (1 << 15)) && value & (1 << 0)) { /* STT */
nack = !!i2c_start_transfer(s->bus, s->addr[1], /* SA */
(~value >> 9) & 1); /* TRX */
s->stat |= nack << 1; /* NACK */
s->control &= ~(1 << 0); /* STT */
if (nack)
s->control &= ~(1 << 1); /* STP */
else
else {
s->count_cur = s->count;
omap_i2c_fifo_run(s);
}
omap_i2c_interrupts_update(s);
}
break;
......@@ -384,7 +420,12 @@ static void omap_i2c_write(void *opaque, target_phys_addr_t addr,
break;
case 0x3c: /* I2C_SYSTEST */
s->test = value & 0xf00f;
s->test = value & 0xf80f;
if (value & (1 << 11)) /* SBB */
if (s->revision >= OMAP2_INTR_REV) {
s->stat |= 0x3f;
omap_i2c_interrupts_update(s);
}
if (value & (1 << 15)) /* ST_EN */
printf("%s: System Test not supported\n", __FUNCTION__);
break;
......@@ -395,6 +436,34 @@ static void omap_i2c_write(void *opaque, target_phys_addr_t addr,
}
}
static void omap_i2c_writeb(void *opaque, target_phys_addr_t addr,
uint32_t value)
{
struct omap_i2c_s *s = (struct omap_i2c_s *) opaque;
int offset = addr & OMAP_MPUI_REG_MASK;
switch (offset) {
case 0x1c: /* I2C_DATA */
if (s->txlen > 2) {
/* XXX: remote access (qualifier) error - what's that? */
break;
}
s->fifo <<= 8;
s->txlen += 1;
s->fifo |= value & 0xff;
s->stat &= ~(1 << 10); /* XUDF */
if (s->txlen > 2)
s->stat &= ~(1 << 4); /* XRDY */
omap_i2c_fifo_run(s);
omap_i2c_interrupts_update(s);
break;
default:
OMAP_BAD_REG(addr);
return;
}
}
static CPUReadMemoryFunc *omap_i2c_readfn[] = {
omap_badwidth_read16,
omap_i2c_read,
......@@ -402,9 +471,9 @@ static CPUReadMemoryFunc *omap_i2c_readfn[] = {
};
static CPUWriteMemoryFunc *omap_i2c_writefn[] = {
omap_badwidth_write16,
omap_i2c_writeb, /* Only the last fifo write can be 8 bit. */
omap_i2c_write,
omap_i2c_write, /* TODO: Only the last fifo write can be 8 bit. */
omap_badwidth_write16,
};
struct omap_i2c_s *omap_i2c_init(target_phys_addr_t base,
......@@ -414,6 +483,8 @@ struct omap_i2c_s *omap_i2c_init(target_phys_addr_t base,
struct omap_i2c_s *s = (struct omap_i2c_s *)
qemu_mallocz(sizeof(struct omap_i2c_s));
/* TODO: set a value greater or equal to real hardware */
s->revision = 0x11;
s->base = base;
s->irq = irq;
s->drq[0] = dma[0];
......@@ -431,6 +502,30 @@ struct omap_i2c_s *omap_i2c_init(target_phys_addr_t base,
return s;
}
struct omap_i2c_s *omap2_i2c_init(struct omap_target_agent_s *ta,
qemu_irq irq, qemu_irq *dma, omap_clk fclk, omap_clk iclk)
{
int iomemtype;
struct omap_i2c_s *s = (struct omap_i2c_s *)
qemu_mallocz(sizeof(struct omap_i2c_s));
s->revision = 0x34;
s->irq = irq;
s->drq[0] = dma[0];
s->drq[1] = dma[1];
s->slave.event = omap_i2c_event;
s->slave.recv = omap_i2c_rx;
s->slave.send = omap_i2c_tx;
s->bus = i2c_init_bus();
omap_i2c_reset(s);
iomemtype = cpu_register_io_memory(0, omap_i2c_readfn,
omap_i2c_writefn, s);
s->base = omap_l4_attach(ta, 0, iomemtype);
return s;
}
i2c_bus *omap_i2c_bus(struct omap_i2c_s *s)
{
return s->bus;
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或