提交 27143a44 编写于 作者: A Anthony Liguori

char: rename qemu_chr_open() -> qemu_chr_new()

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
上级 15f31519
......@@ -2764,7 +2764,7 @@ int gdbserver_start(const char *device)
sigaction(SIGINT, &act, NULL);
}
#endif
chr = qemu_chr_open("gdb", device, NULL);
chr = qemu_chr_new("gdb", device, NULL);
if (!chr)
return -1;
......
......@@ -443,7 +443,7 @@ static MaltaFPGAState *malta_fpga_init(target_phys_addr_t base, qemu_irq uart_ir
/* 0xa00 is less than a page, so will still get the right offsets. */
cpu_register_physical_memory(base + 0xa00, 0x100000 - 0xa00, malta);
s->display = qemu_chr_open("fpga", "vc:320x200", malta_fpga_led_init);
s->display = qemu_chr_new("fpga", "vc:320x200", malta_fpga_led_init);
#ifdef TARGET_WORDS_BIGENDIAN
s->uart = serial_mm_init(base + 0x900, 3, uart_irq, 230400, uart_chr, 1, 1);
......@@ -784,7 +784,7 @@ void mips_malta_init (ram_addr_t ram_size,
if (!serial_hds[i]) {
char label[32];
snprintf(label, sizeof(label), "serial%d", i);
serial_hds[i] = qemu_chr_open(label, "null", NULL);
serial_hds[i] = qemu_chr_new(label, "null", NULL);
}
}
......
......@@ -782,7 +782,7 @@ static struct omap_sti_s *omap_sti_init(struct omap_target_agent_s *ta,
s->irq = irq;
omap_sti_reset(s);
s->chr = chr ?: qemu_chr_open("null", "null", NULL);
s->chr = chr ?: qemu_chr_new("null", "null", NULL);
iomemtype = l4_register_io_memory(omap_sti_readfn,
omap_sti_writefn, s);
......
......@@ -62,11 +62,11 @@ struct omap_uart_s *omap_uart_init(target_phys_addr_t base,
s->irq = irq;
#ifdef TARGET_WORDS_BIGENDIAN
s->serial = serial_mm_init(base, 2, irq, omap_clk_getrate(fclk)/16,
chr ?: qemu_chr_open(label, "null", NULL), 1,
chr ?: qemu_chr_new(label, "null", NULL), 1,
1);
#else
s->serial = serial_mm_init(base, 2, irq, omap_clk_getrate(fclk)/16,
chr ?: qemu_chr_open(label, "null", NULL), 1,
chr ?: qemu_chr_new(label, "null", NULL), 1,
0);
#endif
return s;
......@@ -185,12 +185,12 @@ void omap_uart_attach(struct omap_uart_s *s, CharDriverState *chr)
#ifdef TARGET_WORDS_BIGENDIAN
s->serial = serial_mm_init(s->base, 2, s->irq,
omap_clk_getrate(s->fclk) / 16,
chr ?: qemu_chr_open("null", "null", NULL), 1,
chr ?: qemu_chr_new("null", "null", NULL), 1,
1);
#else
s->serial = serial_mm_init(s->base, 2, s->irq,
omap_clk_getrate(s->fclk) / 16,
chr ?: qemu_chr_open("null", "null", NULL), 1,
chr ?: qemu_chr_new("null", "null", NULL), 1,
0);
#endif
}
......@@ -538,7 +538,7 @@ static USBDevice *usb_serial_init(const char *filename)
filename++;
snprintf(label, sizeof(label), "usbserial%d", index++);
cdrv = qemu_chr_open(label, filename, NULL);
cdrv = qemu_chr_new(label, filename, NULL);
if (!cdrv)
return NULL;
......@@ -561,7 +561,7 @@ static USBDevice *usb_braille_init(const char *unused)
USBDevice *dev;
CharDriverState *cdrv;
cdrv = qemu_chr_open("braille", "braille", NULL);
cdrv = qemu_chr_new("braille", "braille", NULL);
if (!cdrv)
return NULL;
......
......@@ -202,7 +202,7 @@ static int con_init(struct XenDevice *xendev)
con->chr = serial_hds[con->xendev.dev];
} else {
snprintf(label, sizeof(label), "xencons%d", con->xendev.dev);
con->chr = qemu_chr_open(label, output, NULL);
con->chr = qemu_chr_new(label, output, NULL);
}
xenstore_store_pv_console_info(con->xendev.dev, con->chr);
......
......@@ -616,7 +616,7 @@ static int slirp_guestfwd(SlirpState *s, const char *config_str,
fwd = g_malloc(sizeof(struct GuestFwd));
snprintf(buf, sizeof(buf), "guestfwd.tcp.%d", port);
fwd->hd = qemu_chr_open(buf, p, NULL);
fwd->hd = qemu_chr_new(buf, p, NULL);
if (!fwd->hd) {
error_report("could not open guest forwarding device '%s'", buf);
g_free(fwd);
......
......@@ -2603,7 +2603,7 @@ CharDriverState *qemu_chr_open_opts(QemuOpts *opts,
return chr;
}
CharDriverState *qemu_chr_open(const char *label, const char *filename, void (*init)(struct CharDriverState *s))
CharDriverState *qemu_chr_new(const char *label, const char *filename, void (*init)(struct CharDriverState *s))
{
const char *p;
CharDriverState *chr;
......
......@@ -80,7 +80,7 @@ struct CharDriverState {
QemuOpts *qemu_chr_parse_compat(const char *label, const char *filename);
CharDriverState *qemu_chr_open_opts(QemuOpts *opts,
void (*init)(struct CharDriverState *s));
CharDriverState *qemu_chr_open(const char *label, const char *filename, void (*init)(struct CharDriverState *s));
CharDriverState *qemu_chr_new(const char *label, const char *filename, void (*init)(struct CharDriverState *s));
void qemu_chr_fe_set_echo(struct CharDriverState *chr, bool echo);
void qemu_chr_fe_open(struct CharDriverState *chr);
void qemu_chr_fe_close(struct CharDriverState *chr);
......
......@@ -1828,7 +1828,7 @@ static int serial_parse(const char *devname)
exit(1);
}
snprintf(label, sizeof(label), "serial%d", index);
serial_hds[index] = qemu_chr_open(label, devname, NULL);
serial_hds[index] = qemu_chr_new(label, devname, NULL);
if (!serial_hds[index]) {
fprintf(stderr, "qemu: could not open serial device '%s': %s\n",
devname, strerror(errno));
......@@ -1850,7 +1850,7 @@ static int parallel_parse(const char *devname)
exit(1);
}
snprintf(label, sizeof(label), "parallel%d", index);
parallel_hds[index] = qemu_chr_open(label, devname, NULL);
parallel_hds[index] = qemu_chr_new(label, devname, NULL);
if (!parallel_hds[index]) {
fprintf(stderr, "qemu: could not open parallel device '%s': %s\n",
devname, strerror(errno));
......@@ -1881,7 +1881,7 @@ static int virtcon_parse(const char *devname)
qemu_opt_set(dev_opts, "driver", "virtconsole");
snprintf(label, sizeof(label), "virtcon%d", index);
virtcon_hds[index] = qemu_chr_open(label, devname, NULL);
virtcon_hds[index] = qemu_chr_new(label, devname, NULL);
if (!virtcon_hds[index]) {
fprintf(stderr, "qemu: could not open virtio console '%s': %s\n",
devname, strerror(errno));
......@@ -1897,7 +1897,7 @@ static int debugcon_parse(const char *devname)
{
QemuOpts *opts;
if (!qemu_chr_open("debugcon", devname, NULL)) {
if (!qemu_chr_new("debugcon", devname, NULL)) {
exit(1);
}
opts = qemu_opts_create(qemu_find_opts("device"), "debugcon", 1);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册