提交 26aa7d72 编写于 作者: B bellard

isa memory remapping support (aka PPC PREP VGA support)


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@773 c046a42c-6fe2-441c-8c8c-71466251a162
上级 8e9c4afe
......@@ -896,7 +896,7 @@ void PPC_end_init (void)
VGA_init();
}
/* PC hardware initialisation */
/* PowerPC PREP hardware initialisation */
void ppc_prep_init(int ram_size, int vga_ram_size, int boot_device,
DisplayState *ds, const char **fd_filename, int snapshot,
const char *kernel_filename, const char *kernel_cmdline,
......@@ -911,6 +911,8 @@ void ppc_prep_init(int ram_size, int vga_ram_size, int boot_device,
/* allocate RAM */
cpu_register_physical_memory(0, ram_size, 0);
isa_mem_base = 0xc0000000;
if (linux_boot) {
/* now we can load the kernel */
ret = load_image(kernel_filename, phys_ram_base + KERNEL_LOAD_ADDR);
......
......@@ -549,7 +549,7 @@ static void vbe_ioport_write(void *opaque, uint32_t addr, uint32_t val)
case VBE_DISPI_INDEX_BANK:
val &= s->vbe_bank_mask;
s->vbe_regs[s->vbe_index] = val;
s->bank_offset = (val << 16) - 0xa0000;
s->bank_offset = (val << 16);
break;
case VBE_DISPI_INDEX_ENABLE:
if (val & VBE_DISPI_ENABLED) {
......@@ -603,7 +603,7 @@ static void vbe_ioport_write(void *opaque, uint32_t addr, uint32_t val)
s->vbe_regs[s->vbe_index] = val;
} else {
/* XXX: the bios should do that */
s->bank_offset = -0xa0000;
s->bank_offset = 0;
}
break;
case VBE_DISPI_INDEX_VIRT_WIDTH:
......@@ -656,23 +656,23 @@ static uint32_t vga_mem_readb(target_phys_addr_t addr)
/* convert to VGA memory offset */
memory_map_mode = (s->gr[6] >> 2) & 3;
addr &= 0x1ffff;
switch(memory_map_mode) {
case 0:
addr -= 0xa0000;
break;
case 1:
if (addr >= 0xb0000)
if (addr >= 0x10000)
return 0xff;
addr += s->bank_offset;
break;
case 2:
addr -= 0xb0000;
addr -= 0x10000;
if (addr >= 0x8000)
return 0xff;
break;
default:
case 3:
addr -= 0xb8000;
addr -= 0x18000;
if (addr >= 0x8000)
return 0xff;
break;
......@@ -734,23 +734,23 @@ static void vga_mem_writeb(target_phys_addr_t addr, uint32_t val)
#endif
/* convert to VGA memory offset */
memory_map_mode = (s->gr[6] >> 2) & 3;
addr &= 0x1ffff;
switch(memory_map_mode) {
case 0:
addr -= 0xa0000;
break;
case 1:
if (addr >= 0xb0000)
if (addr >= 0x10000)
return;
addr += s->bank_offset;
break;
case 2:
addr -= 0xb0000;
addr -= 0x10000;
if (addr >= 0x8000)
return;
break;
default:
case 3:
addr -= 0xb8000;
addr -= 0x18000;
if (addr >= 0x8000)
return;
break;
......@@ -1758,7 +1758,7 @@ int vga_initialize(DisplayState *ds, uint8_t *vga_ram_base,
register_ioport_read(0x3d4, 2, 1, vga_ioport_read, s);
register_ioport_read(0x3ba, 1, 1, vga_ioport_read, s);
register_ioport_read(0x3da, 1, 1, vga_ioport_read, s);
s->bank_offset = -0xa0000;
s->bank_offset = 0;
#ifdef CONFIG_BOCHS_VBE
s->vbe_regs[VBE_DISPI_INDEX_ID] = VBE_DISPI_ID0;
......@@ -1771,15 +1771,14 @@ int vga_initialize(DisplayState *ds, uint8_t *vga_ram_base,
#endif
vga_io_memory = cpu_register_io_memory(0, vga_mem_read, vga_mem_write);
#if defined (TARGET_I386)
cpu_register_physical_memory(0x000a0000, 0x20000, vga_io_memory);
cpu_register_physical_memory(isa_mem_base + 0x000a0000, 0x20000,
vga_io_memory);
#ifdef CONFIG_BOCHS_VBE
#if defined (TARGET_I386)
/* XXX: use optimized standard vga accesses */
cpu_register_physical_memory(VBE_DISPI_LFB_PHYSICAL_ADDRESS,
vga_ram_size, vga_ram_offset);
#endif
#elif defined (TARGET_PPC)
cpu_register_physical_memory(0xf00a0000, 0x20000, vga_io_memory);
#endif
return 0;
}
......
......@@ -114,7 +114,9 @@ int vm_running;
int audio_enabled = 0;
/***********************************************************/
/* x86 io ports */
/* x86 ISA bus support */
target_phys_addr_t isa_mem_base = 0;
uint32_t default_ioport_readb(void *opaque, uint32_t address)
{
......
......@@ -144,13 +144,6 @@ static inline uint16_t cpu_to_le16(uint16_t v)
/* vl.c */
extern int reset_requested;
typedef void (IOPortWriteFunc)(void *opaque, uint32_t address, uint32_t data);
typedef uint32_t (IOPortReadFunc)(void *opaque, uint32_t address);
int register_ioport_read(int start, int length, int size,
IOPortReadFunc *func, void *opaque);
int register_ioport_write(int start, int length, int size,
IOPortWriteFunc *func, void *opaque);
uint64_t muldiv64(uint64_t a, uint32_t b, uint32_t c);
void hw_error(const char *fmt, ...);
......@@ -348,6 +341,18 @@ void bdrv_set_change_cb(BlockDriverState *bs,
void bdrv_info(void);
BlockDriverState *bdrv_find(const char *name);
/* ISA bus */
extern target_phys_addr_t isa_mem_base;
typedef void (IOPortWriteFunc)(void *opaque, uint32_t address, uint32_t data);
typedef uint32_t (IOPortReadFunc)(void *opaque, uint32_t address);
int register_ioport_read(int start, int length, int size,
IOPortReadFunc *func, void *opaque);
int register_ioport_write(int start, int length, int size,
IOPortWriteFunc *func, void *opaque);
/* vga.c */
#define VGA_RAM_SIZE (4096 * 1024)
......@@ -503,6 +508,12 @@ void pc_init(int ram_size, int vga_ram_size, int boot_device,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename);
/* ppc.c */
void ppc_init (int ram_size, int vga_ram_size, int boot_device,
DisplayState *ds, const char **fd_filename, int snapshot,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename);
/* monitor.c */
void monitor_init(void);
void term_printf(const char *fmt, ...) __attribute__ ((__format__ (__printf__, 1, 2)));
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册