m25p80: Add support for BRRD/BRWR and BULK_ERASE (0x60)

Add support for the bank address register access commands (BRRD/BRWR) and
the BULK_ERASE (0x60) command.
Signed-off-by: NFrancisco Iglesias <frasse.iglesias@gmail.com>
Acked-by: NMarcin Krzemiński <mar.krzeminski@gmail.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20171126231634.9531-4-frasse.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

hw/block/m25p80.c

@@ -331,7 +331,10 @@ typedef enum {
     WRDI = 0x4,
     RDSR = 0x5,
     WREN = 0x6,
+    BRRD = 0x16,
+    BRWR = 0x17,
     JEDEC_READ = 0x9f,
+    BULK_ERASE_60 = 0x60,
     BULK_ERASE = 0xc7,
     READ_FSR = 0x70,
     RDCR = 0x15,
@@ -704,6 +707,7 @@ static void complete_collecting_data(Flash *s)
             s->write_enable = false;
         }
         break;
+    case BRWR:
     case EXTEND_ADDR_WRITE:
         s->ear = s->data[0];
         break;
@@ -1050,6 +1054,7 @@ static void decode_new_cmd(Flash *s, uint32_t value)
         s->state = STATE_READING_DATA;
         break;
 
+    case BULK_ERASE_60:
     case BULK_ERASE:
         if (s->write_enable) {
             DB_PRINT_L(0, "chip erase\n");
@@ -1067,12 +1072,14 @@ static void decode_new_cmd(Flash *s, uint32_t value)
     case EX_4BYTE_ADDR:
         s->four_bytes_address_mode = false;
         break;
+    case BRRD:
     case EXTEND_ADDR_READ:
         s->data[0] = s->ear;
         s->pos = 0;
         s->len = 1;
         s->state = STATE_READING_DATA;
         break;
+    case BRWR:
     case EXTEND_ADDR_WRITE:
         if (s->write_enable) {
             s->needed_bytes = 1;