hw/misc/iotkit-secctl: Support 4 internal MPCs

The SSE-200 has 4 banks of SRAM, each with its own internal
Memory Protection Controller. The interrupt status for these
extra MPCs appears in the same security controller SECMPCINTSTATUS
register as the MPC for the IoTKit's single SRAM bank. Enhance the
iotkit-secctl device to allow 4 MPCs. (If the particular IoTKit/SSE
variant in use does not have all 4 MPCs then the unused inputs will
simply result in the SECMPCINTSTATUS bits being zero as required.)

The hardcoded constant "1"s in armsse.c indicate the actual number
of SRAM MPCs the IoTKit has, and will be replaced in the following
commit.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-9-peter.maydell@linaro.org

hw/arm/armsse.c

@@ -138,7 +138,7 @@ static void armsse_init(Object *obj)
                             sizeof(s->mpc_irq_orgate), TYPE_OR_IRQ,
                             &error_abort, NULL);
 
-    for (i = 0; i < ARRAY_SIZE(s->mpc_irq_splitter); i++) {
+    for (i = 0; i < IOTS_NUM_EXP_MPC + 1; i++) {
         char *name = g_strdup_printf("mpc-irq-splitter-%d", i);
         SplitIRQ *splitter = &s->mpc_irq_splitter[i];
 
@@ -363,7 +363,7 @@ static void armsse_realize(DeviceState *dev, Error **errp)
 
     /* We must OR together lines from the MPC splitters to go to the NVIC */
     object_property_set_int(OBJECT(&s->mpc_irq_orgate),
-                            IOTS_NUM_EXP_MPC + IOTS_NUM_MPC, "num-lines", &err);
+                            IOTS_NUM_EXP_MPC + 1, "num-lines", &err);
     if (err) {
         error_propagate(errp, err);
         return;
@@ -636,7 +636,7 @@ static void armsse_realize(DeviceState *dev, Error **errp)
     }
 
     /* Wire up the splitters for the MPC IRQs */
-    for (i = 0; i < IOTS_NUM_EXP_MPC + IOTS_NUM_MPC; i++) {
+    for (i = 0; i < IOTS_NUM_EXP_MPC + 1; i++) {
         SplitIRQ *splitter = &s->mpc_irq_splitter[i];
         DeviceState *dev_splitter = DEVICE(splitter);
 

hw/misc/iotkit-secctl.c

@@ -600,7 +600,7 @@ static void iotkit_secctl_mpc_status(void *opaque, int n, int level)
 {
     IoTKitSecCtl *s = IOTKIT_SECCTL(opaque);
 
-    s->mpcintstatus = deposit32(s->mpcintstatus, 0, 1, !!level);
+    s->mpcintstatus = deposit32(s->mpcintstatus, n, 1, !!level);
 }
 
 static void iotkit_secctl_mpcexp_status(void *opaque, int n, int level)
@@ -686,7 +686,8 @@ static void iotkit_secctl_init(Object *obj)
     qdev_init_gpio_out_named(dev, &s->sec_resp_cfg, "sec_resp_cfg", 1);
     qdev_init_gpio_out_named(dev, &s->nsc_cfg_irq, "nsc_cfg", 1);
 
-    qdev_init_gpio_in_named(dev, iotkit_secctl_mpc_status, "mpc_status", 1);
+    qdev_init_gpio_in_named(dev, iotkit_secctl_mpc_status, "mpc_status",
+                            IOTS_NUM_MPC);
     qdev_init_gpio_in_named(dev, iotkit_secctl_mpcexp_status,
                             "mpcexp_status", IOTS_NUM_EXP_MPC);
 

include/hw/misc/iotkit-secctl.h

@@ -40,8 +40,8 @@
  *  + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_enable
  *  + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_clear
  *  + named GPIO inputs ahb_ppcexp{0,1,2,3}_irq_status
- * Controlling the MPC in the IoTKit:
- *  + named GPIO input mpc_status
+ * Controlling the (up to) 4 MPCs in the IoTKit/SSE:
+ *  + named GPIO inputs mpc_status[0..3]
  * Controlling each of the 16 expansion MPCs which a system using the IoTKit
  * might provide:
  *  + named GPIO inputs mpcexp_status[0..15]
@@ -67,7 +67,7 @@
 #define IOTS_NUM_APB_EXP_PPC 4
 #define IOTS_NUM_AHB_EXP_PPC 4
 #define IOTS_NUM_EXP_MPC 16
-#define IOTS_NUM_MPC 1
+#define IOTS_NUM_MPC 4
 #define IOTS_NUM_EXP_MSC 16
 
 typedef struct IoTKitSecCtl IoTKitSecCtl;