Skip to content

Q
qemu

openeuler / qemu

通知 10
Star 0
Fork 0
Q
qemu
提交 0983979b 编写于 作者: P Paolo Bonzini
浏览文件
操作

hw: use ld_p/st_p instead of ld_raw/st_raw 

The ld_raw and st_raw definitions are only needed in code that
must compile for both user-mode and softmmu emulation.  Device
models can use the equivalent ld_p/st_p which are simple
pointer accessors.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
上级 fddbd80c
隐藏空白更改
内联 并排
Showing with 253 addition and 253 deletion
hw/9pfs/virtio-9p-device.c
浏览文件 @ 0983979b
......@@ -34,7 +34,7 @@ static void virtio_9p_get_config(VirtIODevice *vdev, uint8_t *config)
len = strlen(s->tag);
cfg = g_malloc0(sizeof(struct virtio_9p_config) + len);
stw_raw(&cfg->tag_len, len);
stw_p(&cfg->tag_len, len);
/* We don't copy the terminating null to config space */
memcpy(cfg->tag, s->tag, len);
memcpy(config, cfg, s->config_size);
......
hw/arm/nseries.c
浏览文件 @ 0983979b
......@@ -850,119 +850,119 @@ static void n800_setup_nolo_tags(void *sram_base)
strcpy((void *) (p + 8), "F5");
stl_raw(p + 10, 0x04f70000);
stl_p(p + 10, 0x04f70000);
strcpy((void *) (p + 9), "RX-34");
/* RAM size in MB? */
stl_raw(p + 12, 0x80);
stl_p(p + 12, 0x80);
/* Pointer to the list of tags */
stl_raw(p + 13, OMAP2_SRAM_BASE + 0x9000);
stl_p(p + 13, OMAP2_SRAM_BASE + 0x9000);
/* The NOLO tags start here */
p = sram_base + 0x9000;
#define ADD_TAG(tag, len) \
stw_raw((uint16_t *) p + 0, tag); \
stw_raw((uint16_t *) p + 1, len); p++; \
stl_raw(p++, OMAP2_SRAM_BASE | (((void *) v - sram_base) & 0xffff));
stw_p((uint16_t *) p + 0, tag); \
stw_p((uint16_t *) p + 1, len); p++; \
stl_p(p++, OMAP2_SRAM_BASE | (((void *) v - sram_base) & 0xffff));
/* OMAP STI console? Pin out settings? */
ADD_TAG(0x6e01, 414);
for (i = 0; i < ARRAY_SIZE(n800_pinout); i++) {
stl_raw(v++, n800_pinout[i]);
stl_p(v++, n800_pinout[i]);
}
/* Kernel memsize? */
ADD_TAG(0x6e05, 1);
stl_raw(v++, 2);
stl_p(v++, 2);
/* NOLO serial console */
ADD_TAG(0x6e02, 4);
stl_raw(v++, XLDR_LL_UART); /* UART number (1 - 3) */
stl_p(v++, XLDR_LL_UART); /* UART number (1 - 3) */
#if 0
/* CBUS settings (Retu/AVilma) */
ADD_TAG(0x6e03, 6);
stw_raw((uint16_t *) v + 0, 65); /* CBUS GPIO0 */
stw_raw((uint16_t *) v + 1, 66); /* CBUS GPIO1 */
stw_raw((uint16_t *) v + 2, 64); /* CBUS GPIO2 */
stw_p((uint16_t *) v + 0, 65); /* CBUS GPIO0 */
stw_p((uint16_t *) v + 1, 66); /* CBUS GPIO1 */
stw_p((uint16_t *) v + 2, 64); /* CBUS GPIO2 */
v += 2;
#endif
/* Nokia ASIC BB5 (Retu/Tahvo) */
ADD_TAG(0x6e0a, 4);
stw_raw((uint16_t *) v + 0, 111); /* "Retu" interrupt GPIO */
stw_raw((uint16_t *) v + 1, 108); /* "Tahvo" interrupt GPIO */
stw_p((uint16_t *) v + 0, 111); /* "Retu" interrupt GPIO */
stw_p((uint16_t *) v + 1, 108); /* "Tahvo" interrupt GPIO */
v++;
/* LCD console? */
ADD_TAG(0x6e04, 4);
stw_raw((uint16_t *) v + 0, 30); /* ??? */
stw_raw((uint16_t *) v + 1, 24); /* ??? */
stw_p((uint16_t *) v + 0, 30); /* ??? */
stw_p((uint16_t *) v + 1, 24); /* ??? */
v++;
#if 0
/* LCD settings */
ADD_TAG(0x6e06, 2);
stw_raw((uint16_t *) (v++), 15); /* ??? */
stw_p((uint16_t *) (v++), 15); /* ??? */
#endif
/* I^2C (Menelaus) */
ADD_TAG(0x6e07, 4);
stl_raw(v++, 0x00720000); /* ??? */
stl_p(v++, 0x00720000); /* ??? */
/* Unknown */
ADD_TAG(0x6e0b, 6);
stw_raw((uint16_t *) v + 0, 94); /* ??? */
stw_raw((uint16_t *) v + 1, 23); /* ??? */
stw_raw((uint16_t *) v + 2, 0); /* ??? */
stw_p((uint16_t *) v + 0, 94); /* ??? */
stw_p((uint16_t *) v + 1, 23); /* ??? */
stw_p((uint16_t *) v + 2, 0); /* ??? */
v += 2;
/* OMAP gpio switch info */
ADD_TAG(0x6e0c, 80);
strcpy((void *) v, "bat_cover"); v += 3;
stw_raw((uint16_t *) v + 0, 110); /* GPIO num ??? */
stw_raw((uint16_t *) v + 1, 1); /* GPIO num ??? */
stw_p((uint16_t *) v + 0, 110); /* GPIO num ??? */
stw_p((uint16_t *) v + 1, 1); /* GPIO num ??? */
v += 2;
strcpy((void *) v, "cam_act"); v += 3;
stw_raw((uint16_t *) v + 0, 95); /* GPIO num ??? */
stw_raw((uint16_t *) v + 1, 32); /* GPIO num ??? */
stw_p((uint16_t *) v + 0, 95); /* GPIO num ??? */
stw_p((uint16_t *) v + 1, 32); /* GPIO num ??? */
v += 2;
strcpy((void *) v, "cam_turn"); v += 3;
stw_raw((uint16_t *) v + 0, 12); /* GPIO num ??? */
stw_raw((uint16_t *) v + 1, 33); /* GPIO num ??? */
stw_p((uint16_t *) v + 0, 12); /* GPIO num ??? */
stw_p((uint16_t *) v + 1, 33); /* GPIO num ??? */
v += 2;
strcpy((void *) v, "headphone"); v += 3;
stw_raw((uint16_t *) v + 0, 107); /* GPIO num ??? */
stw_raw((uint16_t *) v + 1, 17); /* GPIO num ??? */
stw_p((uint16_t *) v + 0, 107); /* GPIO num ??? */
stw_p((uint16_t *) v + 1, 17); /* GPIO num ??? */
v += 2;
/* Bluetooth */
ADD_TAG(0x6e0e, 12);
stl_raw(v++, 0x5c623d01); /* ??? */
stl_raw(v++, 0x00000201); /* ??? */
stl_raw(v++, 0x00000000); /* ??? */
stl_p(v++, 0x5c623d01); /* ??? */
stl_p(v++, 0x00000201); /* ??? */
stl_p(v++, 0x00000000); /* ??? */
/* CX3110x WLAN settings */
ADD_TAG(0x6e0f, 8);
stl_raw(v++, 0x00610025); /* ??? */
stl_raw(v++, 0xffff0057); /* ??? */
stl_p(v++, 0x00610025); /* ??? */
stl_p(v++, 0xffff0057); /* ??? */
/* MMC host settings */
ADD_TAG(0x6e10, 12);
stl_raw(v++, 0xffff000f); /* ??? */
stl_raw(v++, 0xffffffff); /* ??? */
stl_raw(v++, 0x00000060); /* ??? */
stl_p(v++, 0xffff000f); /* ??? */
stl_p(v++, 0xffffffff); /* ??? */
stl_p(v++, 0x00000060); /* ??? */
/* OneNAND chip select */
ADD_TAG(0x6e11, 10);
stl_raw(v++, 0x00000401); /* ??? */
stl_raw(v++, 0x0002003a); /* ??? */
stl_raw(v++, 0x00000002); /* ??? */
stl_p(v++, 0x00000401); /* ??? */
stl_p(v++, 0x0002003a); /* ??? */
stl_p(v++, 0x00000002); /* ??? */
/* TEA5761 sensor settings */
ADD_TAG(0x6e12, 2);
stl_raw(v++, 93); /* GPIO num ??? */
stl_p(v++, 93); /* GPIO num ??? */
#if 0
/* Unknown tag */
......@@ -973,8 +973,8 @@ static void n800_setup_nolo_tags(void *sram_base)
#endif
/* End of the list */
stl_raw(p++, 0x00000000);
stl_raw(p++, 0x00000000);
stl_p(p++, 0x00000000);
stl_p(p++, 0x00000000);
}
/* This task is normally performed by the bootloader. If we're loading
......@@ -1137,112 +1137,112 @@ static int n8x0_atag_setup(void *p, int model)
w = p;
stw_raw(w++, OMAP_TAG_UART); /* u16 tag */
stw_raw(w++, 4); /* u16 len */
stw_raw(w++, (1 << 2) | (1 << 1) | (1 << 0)); /* uint enabled_uarts */
stw_p(w++, OMAP_TAG_UART); /* u16 tag */
stw_p(w++, 4); /* u16 len */
stw_p(w++, (1 << 2) | (1 << 1) | (1 << 0)); /* uint enabled_uarts */
w++;
#if 0
stw_raw(w++, OMAP_TAG_SERIAL_CONSOLE); /* u16 tag */
stw_raw(w++, 4); /* u16 len */
stw_raw(w++, XLDR_LL_UART + 1); /* u8 console_uart */
stw_raw(w++, 115200); /* u32 console_speed */
stw_p(w++, OMAP_TAG_SERIAL_CONSOLE); /* u16 tag */
stw_p(w++, 4); /* u16 len */
stw_p(w++, XLDR_LL_UART + 1); /* u8 console_uart */
stw_p(w++, 115200); /* u32 console_speed */
#endif
stw_raw(w++, OMAP_TAG_LCD); /* u16 tag */
stw_raw(w++, 36); /* u16 len */
stw_p(w++, OMAP_TAG_LCD); /* u16 tag */
stw_p(w++, 36); /* u16 len */
strcpy((void *) w, "QEMU LCD panel"); /* char panel_name[16] */
w += 8;
strcpy((void *) w, "blizzard"); /* char ctrl_name[16] */
w += 8;
stw_raw(w++, N810_BLIZZARD_RESET_GPIO); /* TODO: n800 s16 nreset_gpio */
stw_raw(w++, 24); /* u8 data_lines */
stw_raw(w++, OMAP_TAG_CBUS); /* u16 tag */
stw_raw(w++, 8); /* u16 len */
stw_raw(w++, N8X0_CBUS_CLK_GPIO); /* s16 clk_gpio */
stw_raw(w++, N8X0_CBUS_DAT_GPIO); /* s16 dat_gpio */
stw_raw(w++, N8X0_CBUS_SEL_GPIO); /* s16 sel_gpio */
stw_p(w++, N810_BLIZZARD_RESET_GPIO); /* TODO: n800 s16 nreset_gpio */
stw_p(w++, 24); /* u8 data_lines */
stw_p(w++, OMAP_TAG_CBUS); /* u16 tag */
stw_p(w++, 8); /* u16 len */
stw_p(w++, N8X0_CBUS_CLK_GPIO); /* s16 clk_gpio */
stw_p(w++, N8X0_CBUS_DAT_GPIO); /* s16 dat_gpio */
stw_p(w++, N8X0_CBUS_SEL_GPIO); /* s16 sel_gpio */
w++;
stw_raw(w++, OMAP_TAG_EM_ASIC_BB5); /* u16 tag */
stw_raw(w++, 4); /* u16 len */
stw_raw(w++, N8X0_RETU_GPIO); /* s16 retu_irq_gpio */
stw_raw(w++, N8X0_TAHVO_GPIO); /* s16 tahvo_irq_gpio */
stw_p(w++, OMAP_TAG_EM_ASIC_BB5); /* u16 tag */
stw_p(w++, 4); /* u16 len */
stw_p(w++, N8X0_RETU_GPIO); /* s16 retu_irq_gpio */
stw_p(w++, N8X0_TAHVO_GPIO); /* s16 tahvo_irq_gpio */
gpiosw = (model == 810) ? n810_gpiosw_info : n800_gpiosw_info;
for (; gpiosw->name; gpiosw++) {
stw_raw(w++, OMAP_TAG_GPIO_SWITCH); /* u16 tag */
stw_raw(w++, 20); /* u16 len */
stw_p(w++, OMAP_TAG_GPIO_SWITCH); /* u16 tag */
stw_p(w++, 20); /* u16 len */
strcpy((void *) w, gpiosw->name); /* char name[12] */
w += 6;
stw_raw(w++, gpiosw->line); /* u16 gpio */
stw_raw(w++, gpiosw->type);
stw_raw(w++, 0);
stw_raw(w++, 0);
stw_p(w++, gpiosw->line); /* u16 gpio */
stw_p(w++, gpiosw->type);
stw_p(w++, 0);
stw_p(w++, 0);
}
stw_raw(w++, OMAP_TAG_NOKIA_BT); /* u16 tag */
stw_raw(w++, 12); /* u16 len */
stw_p(w++, OMAP_TAG_NOKIA_BT); /* u16 tag */
stw_p(w++, 12); /* u16 len */
b = (void *) w;
stb_raw(b++, 0x01); /* u8 chip_type (CSR) */
stb_raw(b++, N8X0_BT_WKUP_GPIO); /* u8 bt_wakeup_gpio */
stb_raw(b++, N8X0_BT_HOST_WKUP_GPIO); /* u8 host_wakeup_gpio */
stb_raw(b++, N8X0_BT_RESET_GPIO); /* u8 reset_gpio */
stb_raw(b++, BT_UART + 1); /* u8 bt_uart */
stb_p(b++, 0x01); /* u8 chip_type (CSR) */
stb_p(b++, N8X0_BT_WKUP_GPIO); /* u8 bt_wakeup_gpio */
stb_p(b++, N8X0_BT_HOST_WKUP_GPIO); /* u8 host_wakeup_gpio */
stb_p(b++, N8X0_BT_RESET_GPIO); /* u8 reset_gpio */
stb_p(b++, BT_UART + 1); /* u8 bt_uart */
memcpy(b, &n8x0_bd_addr, 6); /* u8 bd_addr[6] */
b += 6;
stb_raw(b++, 0x02); /* u8 bt_sysclk (38.4) */
stb_p(b++, 0x02); /* u8 bt_sysclk (38.4) */
w = (void *) b;
stw_raw(w++, OMAP_TAG_WLAN_CX3110X); /* u16 tag */
stw_raw(w++, 8); /* u16 len */
stw_raw(w++, 0x25); /* u8 chip_type */
stw_raw(w++, N8X0_WLAN_PWR_GPIO); /* s16 power_gpio */
stw_raw(w++, N8X0_WLAN_IRQ_GPIO); /* s16 irq_gpio */
stw_raw(w++, -1); /* s16 spi_cs_gpio */
stw_p(w++, OMAP_TAG_WLAN_CX3110X); /* u16 tag */
stw_p(w++, 8); /* u16 len */
stw_p(w++, 0x25); /* u8 chip_type */
stw_p(w++, N8X0_WLAN_PWR_GPIO); /* s16 power_gpio */
stw_p(w++, N8X0_WLAN_IRQ_GPIO); /* s16 irq_gpio */
stw_p(w++, -1); /* s16 spi_cs_gpio */
stw_raw(w++, OMAP_TAG_MMC); /* u16 tag */
stw_raw(w++, 16); /* u16 len */
stw_p(w++, OMAP_TAG_MMC); /* u16 tag */
stw_p(w++, 16); /* u16 len */
if (model == 810) {
stw_raw(w++, 0x23f); /* unsigned flags */
stw_raw(w++, -1); /* s16 power_pin */
stw_raw(w++, -1); /* s16 switch_pin */
stw_raw(w++, -1); /* s16 wp_pin */
stw_raw(w++, 0x240); /* unsigned flags */
stw_raw(w++, 0xc000); /* s16 power_pin */
stw_raw(w++, 0x0248); /* s16 switch_pin */
stw_raw(w++, 0xc000); /* s16 wp_pin */
stw_p(w++, 0x23f); /* unsigned flags */
stw_p(w++, -1); /* s16 power_pin */
stw_p(w++, -1); /* s16 switch_pin */
stw_p(w++, -1); /* s16 wp_pin */
stw_p(w++, 0x240); /* unsigned flags */
stw_p(w++, 0xc000); /* s16 power_pin */
stw_p(w++, 0x0248); /* s16 switch_pin */
stw_p(w++, 0xc000); /* s16 wp_pin */
} else {
stw_raw(w++, 0xf); /* unsigned flags */
stw_raw(w++, -1); /* s16 power_pin */
stw_raw(w++, -1); /* s16 switch_pin */
stw_raw(w++, -1); /* s16 wp_pin */
stw_raw(w++, 0); /* unsigned flags */
stw_raw(w++, 0); /* s16 power_pin */
stw_raw(w++, 0); /* s16 switch_pin */
stw_raw(w++, 0); /* s16 wp_pin */
stw_p(w++, 0xf); /* unsigned flags */
stw_p(w++, -1); /* s16 power_pin */
stw_p(w++, -1); /* s16 switch_pin */
stw_p(w++, -1); /* s16 wp_pin */
stw_p(w++, 0); /* unsigned flags */
stw_p(w++, 0); /* s16 power_pin */
stw_p(w++, 0); /* s16 switch_pin */
stw_p(w++, 0); /* s16 wp_pin */
}
stw_raw(w++, OMAP_TAG_TEA5761); /* u16 tag */
stw_raw(w++, 4); /* u16 len */
stw_raw(w++, N8X0_TEA5761_CS_GPIO); /* u16 enable_gpio */
stw_p(w++, OMAP_TAG_TEA5761); /* u16 tag */
stw_p(w++, 4); /* u16 len */
stw_p(w++, N8X0_TEA5761_CS_GPIO); /* u16 enable_gpio */
w++;
partition = (model == 810) ? n810_part_info : n800_part_info;
for (; partition->name; partition++) {
stw_raw(w++, OMAP_TAG_PARTITION); /* u16 tag */
stw_raw(w++, 28); /* u16 len */
stw_p(w++, OMAP_TAG_PARTITION); /* u16 tag */
stw_p(w++, 28); /* u16 len */
strcpy((void *) w, partition->name); /* char name[16] */
l = (void *) (w + 8);
stl_raw(l++, partition->size); /* unsigned int size */
stl_raw(l++, partition->offset); /* unsigned int offset */
stl_raw(l++, partition->mask); /* unsigned int mask_flags */
stl_p(l++, partition->size); /* unsigned int size */
stl_p(l++, partition->offset); /* unsigned int offset */
stl_p(l++, partition->mask); /* unsigned int mask_flags */
w = (void *) l;
}
stw_raw(w++, OMAP_TAG_BOOT_REASON); /* u16 tag */
stw_raw(w++, 12); /* u16 len */
stw_p(w++, OMAP_TAG_BOOT_REASON); /* u16 tag */
stw_p(w++, 12); /* u16 len */
#if 0
strcpy((void *) w, "por"); /* char reason_str[12] */
strcpy((void *) w, "charger"); /* char reason_str[12] */
......@@ -1260,15 +1260,15 @@ static int n8x0_atag_setup(void *p, int model)
w += 6;
tag = (model == 810) ? "RX-44" : "RX-34";
stw_raw(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
stw_raw(w++, 24); /* u16 len */
stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
stw_p(w++, 24); /* u16 len */
strcpy((void *) w, "product"); /* char component[12] */
w += 6;
strcpy((void *) w, tag); /* char version[12] */
w += 6;
stw_raw(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
stw_raw(w++, 24); /* u16 len */
stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
stw_p(w++, 24); /* u16 len */
strcpy((void *) w, "hw-build"); /* char component[12] */
w += 6;
strcpy((void *) w, "QEMU ");
......@@ -1276,8 +1276,8 @@ static int n8x0_atag_setup(void *p, int model)
w += 6;
tag = (model == 810) ? "1.1.10-qemu" : "1.1.6-qemu";
stw_raw(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
stw_raw(w++, 24); /* u16 len */
stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
stw_p(w++, 24); /* u16 len */
strcpy((void *) w, "nolo"); /* char component[12] */
w += 6;
strcpy((void *) w, tag); /* char version[12] */
......
hw/block/virtio-blk.c
浏览文件 @ 0983979b
......@@ -487,12 +487,12 @@ static void virtio_blk_update_config(VirtIODevice *vdev, uint8_t *config)
bdrv_get_geometry(s->bs, &capacity);
memset(&blkcfg, 0, sizeof(blkcfg));
stq_raw(&blkcfg.capacity, capacity);
stl_raw(&blkcfg.seg_max, 128 - 2);
stw_raw(&blkcfg.cylinders, s->conf->cyls);
stl_raw(&blkcfg.blk_size, blk_size);
stw_raw(&blkcfg.min_io_size, s->conf->min_io_size / blk_size);
stw_raw(&blkcfg.opt_io_size, s->conf->opt_io_size / blk_size);
stq_p(&blkcfg.capacity, capacity);
stl_p(&blkcfg.seg_max, 128 - 2);
stw_p(&blkcfg.cylinders, s->conf->cyls);
stl_p(&blkcfg.blk_size, blk_size);
stw_p(&blkcfg.min_io_size, s->conf->min_io_size / blk_size);
stw_p(&blkcfg.opt_io_size, s->conf->opt_io_size / blk_size);
blkcfg.heads = s->conf->heads;
/*
* We must ensure that the block device capacity is a multiple of
......
hw/display/omap_lcd_template.h
浏览文件 @ 0983979b
......@@ -50,7 +50,7 @@ static void glue(draw_line2_, DEPTH)(void *opaque,
uint8_t v, r, g, b;
do {
v = ldub_raw((void *) s);
v = ldub_p((void *) s);
r = (pal[v & 3] >> 4) & 0xf0;
g = pal[v & 3] & 0xf0;
b = (pal[v & 3] << 4) & 0xf0;
......@@ -89,7 +89,7 @@ static void glue(draw_line4_, DEPTH)(void *opaque,
uint8_t v, r, g, b;
do {
v = ldub_raw((void *) s);
v = ldub_p((void *) s);
r = (pal[v & 0xf] >> 4) & 0xf0;
g = pal[v & 0xf] & 0xf0;
b = (pal[v & 0xf] << 4) & 0xf0;
......@@ -116,7 +116,7 @@ static void glue(draw_line8_, DEPTH)(void *opaque,
uint8_t v, r, g, b;
do {
v = ldub_raw((void *) s);
v = ldub_p((void *) s);
r = (pal[v] >> 4) & 0xf0;
g = pal[v] & 0xf0;
b = (pal[v] << 4) & 0xf0;
......@@ -136,7 +136,7 @@ static void glue(draw_line12_, DEPTH)(void *opaque,
uint8_t r, g, b;
do {
v = lduw_raw((void *) s);
v = lduw_p((void *) s);
r = (v >> 4) & 0xf0;
g = v & 0xf0;
b = (v << 4) & 0xf0;
......@@ -159,7 +159,7 @@ static void glue(draw_line16_, DEPTH)(void *opaque,
uint8_t r, g, b;
do {
v = lduw_raw((void *) s);
v = lduw_p((void *) s);
r = (v >> 8) & 0xf8;
g = (v >> 3) & 0xfc;
b = (v << 3) & 0xf8;
......
hw/display/sm501_template.h
浏览文件 @ 0983979b
......@@ -47,7 +47,7 @@ static void glue(draw_line8_, PIXEL_NAME)(
{
uint8_t v, r, g, b;
do {
v = ldub_raw(s);
v = ldub_p(s);
r = (pal[v] >> 16) & 0xff;
g = (pal[v] >> 8) & 0xff;
b = (pal[v] >> 0) & 0xff;
......@@ -64,7 +64,7 @@ static void glue(draw_line16_, PIXEL_NAME)(
uint8_t r, g, b;
do {
rgb565 = lduw_raw(s);
rgb565 = lduw_p(s);
r = ((rgb565 >> 11) & 0x1f) << 3;
g = ((rgb565 >> 5) & 0x3f) << 2;
b = ((rgb565 >> 0) & 0x1f) << 3;
......@@ -80,7 +80,7 @@ static void glue(draw_line32_, PIXEL_NAME)(
uint8_t r, g, b;
do {
ldub_raw(s);
ldub_p(s);
#if defined(TARGET_WORDS_BIGENDIAN)
r = s[1];
g = s[2];
......
hw/display/vga_template.h
浏览文件 @ 0983979b
......@@ -361,7 +361,7 @@ static void glue(vga_draw_line15_, PIXEL_NAME)(VGACommonState *s1, uint8_t *d,
w = width;
do {
v = lduw_raw((void *)s);
v = lduw_p((void *)s);
r = (v >> 7) & 0xf8;
g = (v >> 2) & 0xf8;
b = (v << 3) & 0xf8;
......@@ -386,7 +386,7 @@ static void glue(vga_draw_line16_, PIXEL_NAME)(VGACommonState *s1, uint8_t *d,
w = width;
do {
v = lduw_raw((void *)s);
v = lduw_p((void *)s);
r = (v >> 8) & 0xf8;
g = (v >> 3) & 0xfc;
b = (v << 3) & 0xf8;
......
hw/mips/mips_fulong2e.c
浏览文件 @ 0983979b
......@@ -178,24 +178,24 @@ static void write_bootloader (CPUMIPSState *env, uint8_t *base, int64_t kernel_a
/* Small bootloader */
p = (uint32_t *) base;
stl_raw(p++, 0x0bf00010); /* j 0x1fc00040 */
stl_raw(p++, 0x00000000); /* nop */
stl_p(p++, 0x0bf00010); /* j 0x1fc00040 */
stl_p(p++, 0x00000000); /* nop */
/* Second part of the bootloader */
p = (uint32_t *) (base + 0x040);
stl_raw(p++, 0x3c040000); /* lui a0, 0 */
stl_raw(p++, 0x34840002); /* ori a0, a0, 2 */
stl_raw(p++, 0x3c050000 | ((ENVP_ADDR >> 16) & 0xffff)); /* lui a1, high(ENVP_ADDR) */
stl_raw(p++, 0x34a50000 | (ENVP_ADDR & 0xffff)); /* ori a1, a0, low(ENVP_ADDR) */
stl_raw(p++, 0x3c060000 | (((ENVP_ADDR + 8) >> 16) & 0xffff)); /* lui a2, high(ENVP_ADDR + 8) */
stl_raw(p++, 0x34c60000 | ((ENVP_ADDR + 8) & 0xffff)); /* ori a2, a2, low(ENVP_ADDR + 8) */
stl_raw(p++, 0x3c070000 | (loaderparams.ram_size >> 16)); /* lui a3, high(env->ram_size) */
stl_raw(p++, 0x34e70000 | (loaderparams.ram_size & 0xffff)); /* ori a3, a3, low(env->ram_size) */
stl_raw(p++, 0x3c1f0000 | ((kernel_addr >> 16) & 0xffff)); /* lui ra, high(kernel_addr) */;
stl_raw(p++, 0x37ff0000 | (kernel_addr & 0xffff)); /* ori ra, ra, low(kernel_addr) */
stl_raw(p++, 0x03e00008); /* jr ra */
stl_raw(p++, 0x00000000); /* nop */
stl_p(p++, 0x3c040000); /* lui a0, 0 */
stl_p(p++, 0x34840002); /* ori a0, a0, 2 */
stl_p(p++, 0x3c050000 | ((ENVP_ADDR >> 16) & 0xffff)); /* lui a1, high(ENVP_ADDR) */
stl_p(p++, 0x34a50000 | (ENVP_ADDR & 0xffff)); /* ori a1, a0, low(ENVP_ADDR) */
stl_p(p++, 0x3c060000 | (((ENVP_ADDR + 8) >> 16) & 0xffff)); /* lui a2, high(ENVP_ADDR + 8) */
stl_p(p++, 0x34c60000 | ((ENVP_ADDR + 8) & 0xffff)); /* ori a2, a2, low(ENVP_ADDR + 8) */
stl_p(p++, 0x3c070000 | (loaderparams.ram_size >> 16)); /* lui a3, high(env->ram_size) */
stl_p(p++, 0x34e70000 | (loaderparams.ram_size & 0xffff)); /* ori a3, a3, low(env->ram_size) */
stl_p(p++, 0x3c1f0000 | ((kernel_addr >> 16) & 0xffff)); /* lui ra, high(kernel_addr) */;
stl_p(p++, 0x37ff0000 | (kernel_addr & 0xffff)); /* ori ra, ra, low(kernel_addr) */
stl_p(p++, 0x03e00008); /* jr ra */
stl_p(p++, 0x00000000); /* nop */
}
......
hw/mips/mips_malta.c
浏览文件 @ 0983979b
......@@ -609,136 +609,136 @@ static void write_bootloader (CPUMIPSState *env, uint8_t *base,
/* Small bootloader */
p = (uint32_t *)base;
stl_raw(p++, 0x0bf00160); /* j 0x1fc00580 */
stl_raw(p++, 0x00000000); /* nop */
stl_p(p++, 0x0bf00160); /* j 0x1fc00580 */
stl_p(p++, 0x00000000); /* nop */
/* YAMON service vector */
stl_raw(base + 0x500, 0xbfc00580); /* start: */
stl_raw(base + 0x504, 0xbfc0083c); /* print_count: */
stl_raw(base + 0x520, 0xbfc00580); /* start: */
stl_raw(base + 0x52c, 0xbfc00800); /* flush_cache: */
stl_raw(base + 0x534, 0xbfc00808); /* print: */
stl_raw(base + 0x538, 0xbfc00800); /* reg_cpu_isr: */
stl_raw(base + 0x53c, 0xbfc00800); /* unred_cpu_isr: */
stl_raw(base + 0x540, 0xbfc00800); /* reg_ic_isr: */
stl_raw(base + 0x544, 0xbfc00800); /* unred_ic_isr: */
stl_raw(base + 0x548, 0xbfc00800); /* reg_esr: */
stl_raw(base + 0x54c, 0xbfc00800); /* unreg_esr: */
stl_raw(base + 0x550, 0xbfc00800); /* getchar: */
stl_raw(base + 0x554, 0xbfc00800); /* syscon_read: */
stl_p(base + 0x500, 0xbfc00580); /* start: */
stl_p(base + 0x504, 0xbfc0083c); /* print_count: */
stl_p(base + 0x520, 0xbfc00580); /* start: */
stl_p(base + 0x52c, 0xbfc00800); /* flush_cache: */
stl_p(base + 0x534, 0xbfc00808); /* print: */
stl_p(base + 0x538, 0xbfc00800); /* reg_cpu_isr: */
stl_p(base + 0x53c, 0xbfc00800); /* unred_cpu_isr: */
stl_p(base + 0x540, 0xbfc00800); /* reg_ic_isr: */
stl_p(base + 0x544, 0xbfc00800); /* unred_ic_isr: */
stl_p(base + 0x548, 0xbfc00800); /* reg_esr: */
stl_p(base + 0x54c, 0xbfc00800); /* unreg_esr: */
stl_p(base + 0x550, 0xbfc00800); /* getchar: */
stl_p(base + 0x554, 0xbfc00800); /* syscon_read: */
/* Second part of the bootloader */
p = (uint32_t *) (base + 0x580);
stl_raw(p++, 0x24040002); /* addiu a0, zero, 2 */
stl_raw(p++, 0x3c1d0000 | (((ENVP_ADDR - 64) >> 16) & 0xffff)); /* lui sp, high(ENVP_ADDR) */
stl_raw(p++, 0x37bd0000 | ((ENVP_ADDR - 64) & 0xffff)); /* ori sp, sp, low(ENVP_ADDR) */
stl_raw(p++, 0x3c050000 | ((ENVP_ADDR >> 16) & 0xffff)); /* lui a1, high(ENVP_ADDR) */
stl_raw(p++, 0x34a50000 | (ENVP_ADDR & 0xffff)); /* ori a1, a1, low(ENVP_ADDR) */
stl_raw(p++, 0x3c060000 | (((ENVP_ADDR + 8) >> 16) & 0xffff)); /* lui a2, high(ENVP_ADDR + 8) */
stl_raw(p++, 0x34c60000 | ((ENVP_ADDR + 8) & 0xffff)); /* ori a2, a2, low(ENVP_ADDR + 8) */
stl_raw(p++, 0x3c070000 | (loaderparams.ram_size >> 16)); /* lui a3, high(ram_size) */
stl_raw(p++, 0x34e70000 | (loaderparams.ram_size & 0xffff)); /* ori a3, a3, low(ram_size) */
stl_p(p++, 0x24040002); /* addiu a0, zero, 2 */
stl_p(p++, 0x3c1d0000 | (((ENVP_ADDR - 64) >> 16) & 0xffff)); /* lui sp, high(ENVP_ADDR) */
stl_p(p++, 0x37bd0000 | ((ENVP_ADDR - 64) & 0xffff)); /* ori sp, sp, low(ENVP_ADDR) */
stl_p(p++, 0x3c050000 | ((ENVP_ADDR >> 16) & 0xffff)); /* lui a1, high(ENVP_ADDR) */
stl_p(p++, 0x34a50000 | (ENVP_ADDR & 0xffff)); /* ori a1, a1, low(ENVP_ADDR) */
stl_p(p++, 0x3c060000 | (((ENVP_ADDR + 8) >> 16) & 0xffff)); /* lui a2, high(ENVP_ADDR + 8) */
stl_p(p++, 0x34c60000 | ((ENVP_ADDR + 8) & 0xffff)); /* ori a2, a2, low(ENVP_ADDR + 8) */
stl_p(p++, 0x3c070000 | (loaderparams.ram_size >> 16)); /* lui a3, high(ram_size) */
stl_p(p++, 0x34e70000 | (loaderparams.ram_size & 0xffff)); /* ori a3, a3, low(ram_size) */
/* Load BAR registers as done by YAMON */
stl_raw(p++, 0x3c09b400); /* lui t1, 0xb400 */
stl_p(p++, 0x3c09b400); /* lui t1, 0xb400 */
#ifdef TARGET_WORDS_BIGENDIAN
stl_raw(p++, 0x3c08df00); /* lui t0, 0xdf00 */
stl_p(p++, 0x3c08df00); /* lui t0, 0xdf00 */
#else
stl_raw(p++, 0x340800df); /* ori t0, r0, 0x00df */
stl_p(p++, 0x340800df); /* ori t0, r0, 0x00df */
#endif
stl_raw(p++, 0xad280068); /* sw t0, 0x0068(t1) */
stl_p(p++, 0xad280068); /* sw t0, 0x0068(t1) */
stl_raw(p++, 0x3c09bbe0); /* lui t1, 0xbbe0 */
stl_p(p++, 0x3c09bbe0); /* lui t1, 0xbbe0 */
#ifdef TARGET_WORDS_BIGENDIAN
stl_raw(p++, 0x3c08c000); /* lui t0, 0xc000 */
stl_p(p++, 0x3c08c000); /* lui t0, 0xc000 */
#else
stl_raw(p++, 0x340800c0); /* ori t0, r0, 0x00c0 */
stl_p(p++, 0x340800c0); /* ori t0, r0, 0x00c0 */
#endif
stl_raw(p++, 0xad280048); /* sw t0, 0x0048(t1) */
stl_p(p++, 0xad280048); /* sw t0, 0x0048(t1) */
#ifdef TARGET_WORDS_BIGENDIAN
stl_raw(p++, 0x3c084000); /* lui t0, 0x4000 */
stl_p(p++, 0x3c084000); /* lui t0, 0x4000 */
#else
stl_raw(p++, 0x34080040); /* ori t0, r0, 0x0040 */
stl_p(p++, 0x34080040); /* ori t0, r0, 0x0040 */
#endif
stl_raw(p++, 0xad280050); /* sw t0, 0x0050(t1) */
stl_p(p++, 0xad280050); /* sw t0, 0x0050(t1) */
#ifdef TARGET_WORDS_BIGENDIAN
stl_raw(p++, 0x3c088000); /* lui t0, 0x8000 */
stl_p(p++, 0x3c088000); /* lui t0, 0x8000 */
#else
stl_raw(p++, 0x34080080); /* ori t0, r0, 0x0080 */
stl_p(p++, 0x34080080); /* ori t0, r0, 0x0080 */
#endif
stl_raw(p++, 0xad280058); /* sw t0, 0x0058(t1) */
stl_p(p++, 0xad280058); /* sw t0, 0x0058(t1) */
#ifdef TARGET_WORDS_BIGENDIAN
stl_raw(p++, 0x3c083f00); /* lui t0, 0x3f00 */
stl_p(p++, 0x3c083f00); /* lui t0, 0x3f00 */
#else
stl_raw(p++, 0x3408003f); /* ori t0, r0, 0x003f */
stl_p(p++, 0x3408003f); /* ori t0, r0, 0x003f */
#endif
stl_raw(p++, 0xad280060); /* sw t0, 0x0060(t1) */
stl_p(p++, 0xad280060); /* sw t0, 0x0060(t1) */
#ifdef TARGET_WORDS_BIGENDIAN
stl_raw(p++, 0x3c08c100); /* lui t0, 0xc100 */
stl_p(p++, 0x3c08c100); /* lui t0, 0xc100 */
#else
stl_raw(p++, 0x340800c1); /* ori t0, r0, 0x00c1 */
stl_p(p++, 0x340800c1); /* ori t0, r0, 0x00c1 */
#endif
stl_raw(p++, 0xad280080); /* sw t0, 0x0080(t1) */
stl_p(p++, 0xad280080); /* sw t0, 0x0080(t1) */
#ifdef TARGET_WORDS_BIGENDIAN
stl_raw(p++, 0x3c085e00); /* lui t0, 0x5e00 */
stl_p(p++, 0x3c085e00); /* lui t0, 0x5e00 */
#else
stl_raw(p++, 0x3408005e); /* ori t0, r0, 0x005e */
stl_p(p++, 0x3408005e); /* ori t0, r0, 0x005e */
#endif
stl_raw(p++, 0xad280088); /* sw t0, 0x0088(t1) */
stl_p(p++, 0xad280088); /* sw t0, 0x0088(t1) */
/* Jump to kernel code */
stl_raw(p++, 0x3c1f0000 | ((kernel_entry >> 16) & 0xffff)); /* lui ra, high(kernel_entry) */
stl_raw(p++, 0x37ff0000 | (kernel_entry & 0xffff)); /* ori ra, ra, low(kernel_entry) */
stl_raw(p++, 0x03e00008); /* jr ra */
stl_raw(p++, 0x00000000); /* nop */
stl_p(p++, 0x3c1f0000 | ((kernel_entry >> 16) & 0xffff)); /* lui ra, high(kernel_entry) */
stl_p(p++, 0x37ff0000 | (kernel_entry & 0xffff)); /* ori ra, ra, low(kernel_entry) */
stl_p(p++, 0x03e00008); /* jr ra */
stl_p(p++, 0x00000000); /* nop */
/* YAMON subroutines */
p = (uint32_t *) (base + 0x800);
stl_raw(p++, 0x03e00008); /* jr ra */
stl_raw(p++, 0x24020000); /* li v0,0 */
stl_p(p++, 0x03e00008); /* jr ra */
stl_p(p++, 0x24020000); /* li v0,0 */
/* 808 YAMON print */
stl_raw(p++, 0x03e06821); /* move t5,ra */
stl_raw(p++, 0x00805821); /* move t3,a0 */
stl_raw(p++, 0x00a05021); /* move t2,a1 */
stl_raw(p++, 0x91440000); /* lbu a0,0(t2) */
stl_raw(p++, 0x254a0001); /* addiu t2,t2,1 */
stl_raw(p++, 0x10800005); /* beqz a0,834 */
stl_raw(p++, 0x00000000); /* nop */
stl_raw(p++, 0x0ff0021c); /* jal 870 */
stl_raw(p++, 0x00000000); /* nop */
stl_raw(p++, 0x08000205); /* j 814 */
stl_raw(p++, 0x00000000); /* nop */
stl_raw(p++, 0x01a00008); /* jr t5 */
stl_raw(p++, 0x01602021); /* move a0,t3 */
stl_p(p++, 0x03e06821); /* move t5,ra */
stl_p(p++, 0x00805821); /* move t3,a0 */
stl_p(p++, 0x00a05021); /* move t2,a1 */
stl_p(p++, 0x91440000); /* lbu a0,0(t2) */
stl_p(p++, 0x254a0001); /* addiu t2,t2,1 */
stl_p(p++, 0x10800005); /* beqz a0,834 */
stl_p(p++, 0x00000000); /* nop */
stl_p(p++, 0x0ff0021c); /* jal 870 */
stl_p(p++, 0x00000000); /* nop */
stl_p(p++, 0x08000205); /* j 814 */
stl_p(p++, 0x00000000); /* nop */
stl_p(p++, 0x01a00008); /* jr t5 */
stl_p(p++, 0x01602021); /* move a0,t3 */
/* 0x83c YAMON print_count */
stl_raw(p++, 0x03e06821); /* move t5,ra */
stl_raw(p++, 0x00805821); /* move t3,a0 */
stl_raw(p++, 0x00a05021); /* move t2,a1 */
stl_raw(p++, 0x00c06021); /* move t4,a2 */
stl_raw(p++, 0x91440000); /* lbu a0,0(t2) */
stl_raw(p++, 0x0ff0021c); /* jal 870 */
stl_raw(p++, 0x00000000); /* nop */
stl_raw(p++, 0x254a0001); /* addiu t2,t2,1 */
stl_raw(p++, 0x258cffff); /* addiu t4,t4,-1 */
stl_raw(p++, 0x1580fffa); /* bnez t4,84c */
stl_raw(p++, 0x00000000); /* nop */
stl_raw(p++, 0x01a00008); /* jr t5 */
stl_raw(p++, 0x01602021); /* move a0,t3 */
stl_p(p++, 0x03e06821); /* move t5,ra */
stl_p(p++, 0x00805821); /* move t3,a0 */
stl_p(p++, 0x00a05021); /* move t2,a1 */
stl_p(p++, 0x00c06021); /* move t4,a2 */
stl_p(p++, 0x91440000); /* lbu a0,0(t2) */
stl_p(p++, 0x0ff0021c); /* jal 870 */
stl_p(p++, 0x00000000); /* nop */
stl_p(p++, 0x254a0001); /* addiu t2,t2,1 */
stl_p(p++, 0x258cffff); /* addiu t4,t4,-1 */
stl_p(p++, 0x1580fffa); /* bnez t4,84c */
stl_p(p++, 0x00000000); /* nop */
stl_p(p++, 0x01a00008); /* jr t5 */
stl_p(p++, 0x01602021); /* move a0,t3 */
/* 0x870 */
stl_raw(p++, 0x3c08b800); /* lui t0,0xb400 */
stl_raw(p++, 0x350803f8); /* ori t0,t0,0x3f8 */
stl_raw(p++, 0x91090005); /* lbu t1,5(t0) */
stl_raw(p++, 0x00000000); /* nop */
stl_raw(p++, 0x31290040); /* andi t1,t1,0x40 */
stl_raw(p++, 0x1120fffc); /* beqz t1,878 <outch+0x8> */
stl_raw(p++, 0x00000000); /* nop */
stl_raw(p++, 0x03e00008); /* jr ra */
stl_raw(p++, 0xa1040000); /* sb a0,0(t0) */
stl_p(p++, 0x3c08b800); /* lui t0,0xb400 */
stl_p(p++, 0x350803f8); /* ori t0,t0,0x3f8 */
stl_p(p++, 0x91090005); /* lbu t1,5(t0) */
stl_p(p++, 0x00000000); /* nop */
stl_p(p++, 0x31290040); /* andi t1,t1,0x40 */
stl_p(p++, 0x1120fffc); /* beqz t1,878 <outch+0x8> */
stl_p(p++, 0x00000000); /* nop */
stl_p(p++, 0x03e00008); /* jr ra */
stl_p(p++, 0xa1040000); /* sb a0,0(t0) */
}
......
hw/scsi/vhost-scsi.c
浏览文件 @ 0983979b
......@@ -164,8 +164,8 @@ static void vhost_scsi_set_config(VirtIODevice *vdev,
VirtIOSCSIConfig *scsiconf = (VirtIOSCSIConfig *)config;
VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(vdev);
if ((uint32_t) ldl_raw(&scsiconf->sense_size) != vs->sense_size ||
(uint32_t) ldl_raw(&scsiconf->cdb_size) != vs->cdb_size) {
if ((uint32_t) ldl_p(&scsiconf->sense_size) != vs->sense_size ||
(uint32_t) ldl_p(&scsiconf->cdb_size) != vs->cdb_size) {
error_report("vhost-scsi does not support changing the sense data and CDB sizes");
exit(1);
}
......
hw/scsi/virtio-scsi.c
浏览文件 @ 0983979b
......@@ -425,16 +425,16 @@ static void virtio_scsi_get_config(VirtIODevice *vdev,
VirtIOSCSIConfig *scsiconf = (VirtIOSCSIConfig *)config;
VirtIOSCSICommon *s = VIRTIO_SCSI_COMMON(vdev);
stl_raw(&scsiconf->num_queues, s->conf.num_queues);
stl_raw(&scsiconf->seg_max, 128 - 2);
stl_raw(&scsiconf->max_sectors, s->conf.max_sectors);
stl_raw(&scsiconf->cmd_per_lun, s->conf.cmd_per_lun);
stl_raw(&scsiconf->event_info_size, sizeof(VirtIOSCSIEvent));
stl_raw(&scsiconf->sense_size, s->sense_size);
stl_raw(&scsiconf->cdb_size, s->cdb_size);
stw_raw(&scsiconf->max_channel, VIRTIO_SCSI_MAX_CHANNEL);
stw_raw(&scsiconf->max_target, VIRTIO_SCSI_MAX_TARGET);
stl_raw(&scsiconf->max_lun, VIRTIO_SCSI_MAX_LUN);
stl_p(&scsiconf->num_queues, s->conf.num_queues);
stl_p(&scsiconf->seg_max, 128 - 2);
stl_p(&scsiconf->max_sectors, s->conf.max_sectors);
stl_p(&scsiconf->cmd_per_lun, s->conf.cmd_per_lun);
stl_p(&scsiconf->event_info_size, sizeof(VirtIOSCSIEvent));
stl_p(&scsiconf->sense_size, s->sense_size);
stl_p(&scsiconf->cdb_size, s->cdb_size);
stw_p(&scsiconf->max_channel, VIRTIO_SCSI_MAX_CHANNEL);
stw_p(&scsiconf->max_target, VIRTIO_SCSI_MAX_TARGET);
stl_p(&scsiconf->max_lun, VIRTIO_SCSI_MAX_LUN);
}
static void virtio_scsi_set_config(VirtIODevice *vdev,
......@@ -443,14 +443,14 @@ static void virtio_scsi_set_config(VirtIODevice *vdev,
VirtIOSCSIConfig *scsiconf = (VirtIOSCSIConfig *)config;
VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(vdev);
if ((uint32_t) ldl_raw(&scsiconf->sense_size) >= 65536 ||
(uint32_t) ldl_raw(&scsiconf->cdb_size) >= 256) {
if ((uint32_t) ldl_p(&scsiconf->sense_size) >= 65536 ||
(uint32_t) ldl_p(&scsiconf->cdb_size) >= 256) {
error_report("bad data written to virtio-scsi configuration space");
exit(1);
}
vs->sense_size = ldl_raw(&scsiconf->sense_size);
vs->cdb_size = ldl_raw(&scsiconf->cdb_size);
vs->sense_size = ldl_p(&scsiconf->sense_size);
vs->cdb_size = ldl_p(&scsiconf->cdb_size);
}
static uint32_t virtio_scsi_get_features(VirtIODevice *vdev,
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或