hw/acpi: Make ACPI IO address space configurable

This is in preparation for adding support for ARM64 platforms
where it doesn't use port mapped IO for ACPI IO space. We are
making changes so that MMIO region can be accommodated
and board can pass the base address into the aml build function.

Also move few MEMORY_* definitions to header so that other memory
hotplug event signalling mechanisms (eg. Generic Event Device on
HW-reduced acpi platforms) can use the same from their respective
event handler code.
Signed-off-by: NShameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Message-Id: <20190918130633.4872-2-shameerali.kolothum.thodi@huawei.com>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

hw/acpi/memory_hotplug.c

@@ -30,12 +30,7 @@
 #define MEMORY_SLOT_PROXIMITY_METHOD "MPXM"
 #define MEMORY_SLOT_EJECT_METHOD     "MEJ0"
 #define MEMORY_SLOT_NOTIFY_METHOD    "MTFY"
-#define MEMORY_SLOT_SCAN_METHOD      "MSCN"
 #define MEMORY_HOTPLUG_DEVICE        "MHPD"
-#define MEMORY_HOTPLUG_IO_LEN         24
-#define MEMORY_DEVICES_CONTAINER     "\\_SB.MHPC"
-
-static uint16_t memhp_io_base;
 
 static ACPIOSTInfo *acpi_memory_device_status(int slot, MemStatus *mdev)
 {
@@ -210,7 +205,7 @@ static const MemoryRegionOps acpi_memory_hotplug_ops = {
 };
 
 void acpi_memory_hotplug_init(MemoryRegion *as, Object *owner,
-                              MemHotplugState *state, uint16_t io_base)
+                              MemHotplugState *state, hwaddr io_base)
 {
     MachineState *machine = MACHINE(qdev_get_machine());
 
@@ -219,12 +214,10 @@ void acpi_memory_hotplug_init(MemoryRegion *as, Object *owner,
         return;
     }
 
-    assert(!memhp_io_base);
-    memhp_io_base = io_base;
     state->devs = g_malloc0(sizeof(*state->devs) * state->dev_count);
     memory_region_init_io(&state->io, owner, &acpi_memory_hotplug_ops, state,
                           "acpi-mem-hotplug", MEMORY_HOTPLUG_IO_LEN);
-    memory_region_add_subregion(as, memhp_io_base, &state->io);
+    memory_region_add_subregion(as, io_base, &state->io);
 }
 
 /**
@@ -343,7 +336,8 @@ const VMStateDescription vmstate_memory_hotplug = {
 
 void build_memory_hotplug_aml(Aml *table, uint32_t nr_mem,
                               const char *res_root,
-                              const char *event_handler_method)
+                              const char *event_handler_method,
+                              AmlRegionSpace rs, hwaddr memhp_io_base)
 {
     int i;
     Aml *ifctx;
@@ -352,10 +346,6 @@ void build_memory_hotplug_aml(Aml *table, uint32_t nr_mem,
     Aml *mem_ctrl_dev;
     char *mhp_res_path;
 
-    if (!memhp_io_base) {
-        return;
-    }
-
     mhp_res_path = g_strdup_printf("%s." MEMORY_HOTPLUG_DEVICE, res_root);
     mem_ctrl_dev = aml_device("%s", mhp_res_path);
     {
@@ -366,14 +356,19 @@ void build_memory_hotplug_aml(Aml *table, uint32_t nr_mem,
             aml_name_decl("_UID", aml_string("Memory hotplug resources")));
 
         crs = aml_resource_template();
-        aml_append(crs,
-            aml_io(AML_DECODE16, memhp_io_base, memhp_io_base, 0,
-                   MEMORY_HOTPLUG_IO_LEN)
-        );
+        if (rs == AML_SYSTEM_IO) {
+            aml_append(crs,
+                aml_io(AML_DECODE16, memhp_io_base, memhp_io_base, 0,
+                       MEMORY_HOTPLUG_IO_LEN)
+            );
+        } else {
+            aml_append(crs, aml_memory32_fixed(memhp_io_base,
+                            MEMORY_HOTPLUG_IO_LEN, AML_READ_WRITE));
+        }
         aml_append(mem_ctrl_dev, aml_name_decl("_CRS", crs));
 
         aml_append(mem_ctrl_dev, aml_operation_region(
-            MEMORY_HOTPLUG_IO_REGION, AML_SYSTEM_IO,
+            MEMORY_HOTPLUG_IO_REGION, rs,
             aml_int(memhp_io_base), MEMORY_HOTPLUG_IO_LEN)
         );
 

hw/i386/acpi-build.c

@@ -1888,7 +1888,12 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
         build_cpus_aml(dsdt, machine, opts, pm->cpu_hp_io_base,
                        "\\_SB.PCI0", "\\_GPE._E02");
     }
-    build_memory_hotplug_aml(dsdt, nr_mem, "\\_SB.PCI0", "\\_GPE._E03");
+
+    if (pcms->memhp_io_base && nr_mem) {
+        build_memory_hotplug_aml(dsdt, nr_mem, "\\_SB.PCI0",
+                                 "\\_GPE._E03", AML_SYSTEM_IO,
+                                 pcms->memhp_io_base);
+    }
 
     scope =  aml_scope("_GPE");
     {

hw/i386/pc.c

@@ -1766,6 +1766,9 @@ void pc_memory_init(PCMachineState *pcms,
 
     /* Init default IOAPIC address space */
     pcms->ioapic_as = &address_space_memory;
+
+    /* Init ACPI memory hotplug IO base address */
+    pcms->memhp_io_base = ACPI_MEMORY_HOTPLUG_BASE;
 }
 
 /*

include/hw/acpi/memory_hotplug.h

@@ -5,6 +5,10 @@
 #include "hw/acpi/acpi.h"
 #include "hw/acpi/aml-build.h"
 
+#define MEMORY_SLOT_SCAN_METHOD      "MSCN"
+#define MEMORY_DEVICES_CONTAINER     "\\_SB.MHPC"
+#define MEMORY_HOTPLUG_IO_LEN         24
+
 /**
  * MemStatus:
  * @is_removing: the memory device in slot has been requested to be ejected.
@@ -29,7 +33,7 @@ typedef struct MemHotplugState {
 } MemHotplugState;
 
 void acpi_memory_hotplug_init(MemoryRegion *as, Object *owner,
-                              MemHotplugState *state, uint16_t io_base);
+                              MemHotplugState *state, hwaddr io_base);
 
 void acpi_memory_plug_cb(HotplugHandler *hotplug_dev, MemHotplugState *mem_st,
                          DeviceState *dev, Error **errp);
@@ -48,5 +52,6 @@ void acpi_memory_ospm_status(MemHotplugState *mem_st, ACPIOSTInfoList ***list);
 
 void build_memory_hotplug_aml(Aml *table, uint32_t nr_mem,
                               const char *res_root,
-                              const char *event_handler_method);
+                              const char *event_handler_method,
+                              AmlRegionSpace rs, hwaddr memhp_io_base);
 #endif

include/hw/i386/pc.h

@@ -70,6 +70,9 @@ struct PCMachineState {
     /* Address space used by IOAPIC device. All IOAPIC interrupts
      * will be translated to MSI messages in the address space. */
     AddressSpace *ioapic_as;
+
+    /* ACPI Memory hotplug IO base address */
+    hwaddr memhp_io_base;
 };
 
 #define PC_MACHINE_ACPI_DEVICE_PROP "acpi-device"